We often get asked how do different fluorescent tapes how up under a blacklight (and what do non-fluorescent tapes look like) so we took some comparison photographs to see. Below are some photos of different rolls of yellow tape and how they showed up for us (these were taken in a light tent with a blue background with a Streamlight 51010 UV Flashlight used as the light source against the rolls):
Regular yellow duct tape
Fluorescent yellow duct tape
Regular yellow gaffers tape
Fluorescent yellow gaffers tape
*** Our personal observation is that the fluorescent gaffers definitely showed up the best (especially outside of the light tent), but we did get the PC-619 yellow duct tape to fluoresce also. Outside of the light tent the effect on the PC-619 (polyethylene-coated cloth duct) was not as dramatic as it was on the 510-Neon (vinyl-coated cloth gaffers) though.
Due to customer demand we've recently added the Powerseal 808K bag sealing dispenser to the web site. It has a wide neck so it handles heavy mil bags better than the Powerseal 760K dispenser which we've had for a while now on the site (but which has a standard size neck). In general these bag sealers are used with UPVC film sealing tape like the JVCC BST-24 to seal produce bags, bakery products, candy items, floral arrangements, industrial parts, newspapers and hardware.
The primary tape converter we work with has just opened a facility in Las Vegas, NV which they are just beginning to stock. Not only will this lower the shipping costs for orders shipping to the Western United States, but it will also reduce the time in transit to those locations. Also in our checkout process we now allow you to choose "pickup" as one of the shipping method choices. This means that if you're shipping to the general Las Vegas vicinity you can defray shipping costs by picking it up yourself (the facility is located next to the Las Vegas Motor Speedway 15 minutes north of the Strip). Also, items shipping out of Las Vegas via UPS Ground take just 1 day to arrive to the Southern California area including Los Angeles and San Diego. To see if your items can ship out of the Las Vegas warehouse, just add the items into your shopping cart and then enter in your destination zip code and click on the 'Calculate' shipping button. Beneath each line item in your cart it will then tell you the state it will be shipping from. Also if the product you are looking for is not available yet to ship out of Las Vegas just use the Contact Us Form to inquire about whether or not they'll be stocking that product in Las Vegas and the potential time frame.
View Larger Map
We're only a retailer, but we work closely with different tape converters who supply us with the products we sell on FindTape.com. We often get asked what exactly does an adhesive tape converter do? Basically a tape converter uses various processes to modify adhesive tape products that they get from tape manufacturers. These processes include slitting, rewinding, die-cutting, printing, laminating, etc. They convert (change) master rolls of tape (similar to large rolls of carpet or newsprint in size) to usable sizes and forms for customers. For instance typically gaffers tape comes in a 56" x 900 yard jumbo roll and then individual rolls are converted from that source material into industry standard sizes such as 48mm x 55m on a rewind slitter that cuts the tape as it pulls it off the source roll and then winds it back up on smaller cardboard cores. Other products may be custom cut on lathes that are more flexible when different widths are required. Tape manufacturers also convert their own tape; but often times it is more economical for a specialized converter to do the work for them (also tape manufacturers typically have very high minimums for rolls cut to non-standard widths).
The following are some general recommendations or guidelines to follow when applying a pressure-sensitive adhesive tape:
- Make sure the surface you are applying the tape to is completely dry and free of any debris before the tape is applied.
- If any cleaning supplies were used recently on the surface please make sure no residue remains from the cleaning product (if so please use water to remove and then let it dry completely).
- Unwind the tape from the roll (if the tape has a release liner remove it now). During this step be careful not to contaminate the adhesive by touching it at all with your fingers since it will transfer natural oils over to the adhesive side. Also try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to.
- Use some application pressure (it doesn't have to be that forceful) in order to achieve maximum bond strength. Make sure there is no gapping remaining between the tape and the surface it is being applied to which would allow water to come into contact with the adhesive-side of the tape over time. This would deaden the adhesive and shorten the life span of the tape.
- If the tape has an acrylic adhesive the dwell time the tape needs to be in contact with both surfaces (before it reaches it maximum adhesion) is typically 1 to 24 hours. For best results during this dwell time try to provide some application pressure (e.g. clamps, tape over it, etc.); also if holding an item vertically against a surface try and support the weight if possible.
- For even better adhesion you can also use an adhesion promoter or primer; can see some options at Adhesion Promoter/Primer on FindTape.com.
Scapa has recently discontinued their 142 economy-grade duct tape which our converter had log roll stock in so they were able to offer it in wider widths. They've recently starting stocking log rolls of Polyken GP2280 (available in black, blue, green, olive drab, red, silver, white and yellow) and Nashua 395 (offered in brown and tan) as an alternative. Both tapes are 9 mils thick and are for general or multi-purpose use and they have similar specifications.
During Permacel’s move out of Wisconsin to New Jersey they located an unsold jumbo roll of P-99 that was made at the end of 2008 which they re-certified (the certificate of conformance is here and the shelf life is dated through 7/14/2010). The tape is on Nitto cores (Nitto Denko is phasing out the Permacel name now). The entire jumbo was cut to a 1" width and that inventory has now been added to the web site here.
Shurtape has recently introduced a new glow-in-the-dark gaffers tape called P-661. It has the same adhesiveness and clean removability characteristic of Shurtape P-665 gaffers, but gives you the added benefit of being photoluminescent after the tape is activated by an artificial or natural light source. It is also hand tearable just like a traditional gaffers tape. It has numerous uses including, but not limited to basic stage safety marking (e.g. exists and stairs).
While film release liners are great since once you get them started they can be removed very quickly from a roll of tape without the possibility of the liner ripping like a paper release liner may at times do (that's why to cover large areas like a convention center floor the tape needs to come on a film release liner); nonetheless they can sometimes be hard to get started.
The easiest way to remove a release liner is to unwind a section of the tape from the roll and apply that section of tape to the first surface you are bonding to and then let the adhesive set before you try and remove the liner. However, if you need to remove the release liner before the adhesive has set on the first surface here are some tips or guidelines to follow:
- Unwind a short length of tape from the roll.
- Bend a small amount (1/8 to 1/4 inch from the corner) of one of the corners back towards the liner side (so the liner is touching liner) - this will cause the film liner to stretch more than the backing on the tape which will typically result in the liner overhanging the tape by a little bit.
- Then try to drag the tape away from the liner with your thumbnail while using another fingernail to squeeze or pinch the liner in place.
- Once you get enough of the liner removed you will have something to hold on to in order to start pulling the release liner away from the tape.
*** if you have trouble removing the liner with your fingernails you can also try a pair of tweezers, razor blade or utility knife to help separate the release liner from the tape
Tags : adhesive tape uses
, adhesive tape
, duct tape
, glow-in-the-dark tape
, Gaffer Tape
, gaffers tape
, double-sided tape
, bi-directional tape