- 3M Scotch 3051 Low Tack Paper Tape
3M Scotch 3051 Low Tack Paper Tape has a white smooth flat carrier/backing and is coated with a low tack acrylic adhesive. The tape is designed to be a controlled low tack paper tape for applications on most paper and many other fragile surfaces (this is 3M's replacement for their 230 drafting tape product). 3M 3051 can be automatically dispensed and should remove from most surfaces cleanly and easily without damaging the substrate (should not be used for applications requiring outdoor exposure though). Its smooth white backing is printable with most inks and markers. Can use tape for repositionable layout and assembly of artwork and/or work in process such as illustration boards, blueprints, drawings, tracings, photos, acetate and grid paper. Also for light blocking on negatives; silhouetting; holding and tabbing. Vertical markets include office and supply, paper and print, drafting, graphic arts and photography. If standard masking tape is tearing your work upon removal then this would be a tape to consider.
- Pro Tapes Pro-Measurement Ruler Tape
Pro Tapes Pro-Measurement Ruler Tape is a Kraft paper tape with adhesive backing which can be used as a repositionable ruler. It is a yellow paper tape printed black with markings. It is great for tough situations where a tape measure will not fit. On the Imperial (English) version of the tape every 1/8 of an inch is marked (except on the tape labeled as no lesser increments - for that one only the 1 inch designations are marked) and it is numbered 1 through 12 at each inch designation. It then repeats itself every 12 inches. The 1 inch wide size gives you room off to the side to write, e.g. you can put a strip down and then mark off foot designations at every 12 inches - 1', 2', 3', .... The Metric version of the tape is numbered 1 through 10 at each cm designation. It then repeats itself every 10 cm. There are alternating markings on the Metric tape - for the first 10 cm it is marked at every mm designation and then for the next 10 cm it is marked at every 1/2 cm designation (after the 1/2 cm markings there will be a perforation in the tape and a small gap (about 2mm) before the next run of mm markings begins). Please note that because paper tape elongates a bit it will stretch over longer distances. It is perforated every 12 inches because for each foot it will be very close, but for longer measuring runs you may need to match it up with a metal tape measure to be sure when it is stuck down it isn't stretched at all or the tape can be un-perforated and each foot set down to match.
- JVCC PRE-MASK-1 Premask Application Tape
JVCC PRE-MASK-1 Premask Application Tape is a 5.3 mil natural color transfer premask. Translucent saturated paper with a rubber resin based pressure-sensitive adhesive. It is fully compatible for plotter cuts and thermal die cuts of all size die cuts and vinyl lettering. Pre Mask is used to transfer cut vinyl graphics from their release liner to another surface. The tape protects the graphics from scratches during installation and allows quicker application since the cut graphics will not move during installation. Has medium tack which is ideal for most transfer applications and it has good resistance to abrasion and moisture. Please note this tape only has adhesive on one side; it is not a double-sided tape.
- Shurtape CP-743 Matte Black Paper Tape [Permacel P-743]
Shurtape CP-743 Matte Black Paper Tape is a photographer's matte black masking tape. It features an opaque, matte surface for light-free masking and has high quick stick & adhesion when reproducing photographs. Shurtape CP 743 Paper Tape is used for photographic reproduction work: cropping and edging negatives; positioning negatives for contact printing; redacting legal documents prior to copying; and for blackout sealing of camera bellows and film holders against light leaks. Reliable tape for use in photo studios, film processing laboratories, as well as in home dark-rooms. CP743/P743 Masking Tape is also recommended for use as a chart tape. It features an easy, consistent unwind and is hand tearable. Also because CP 743 features a clear adhesive no white will be visible when looking at the tape from the side unlike a gaffers tape which has white adhesive which can sometimes be partially visible when looking at the tape from that angle. It is now manufactured by Shurtape and used to be referred to as Permacel P-743.
- 3M Scotch 05916 Welding and Spark Deflection Paper Tape
3M 05916 Welding and Spark Deflection Paper Tape is a flame-retardant, repositionable, adhesive-backed paper product used to protect vertical surfaces from damage caused by welding spatter and grinding sparks. It suppresses burning from welding spatter and grinding sparks and can be adjusted after initial installation to insure correct position. It offers low-cost but vital protection. 3M 05916 protects automotive glass and light fixtures, painted sheet metal, other damageable vertical surfaces from spatter and sparks. The product is NOT designed for installation on horizontal surfaces, such as roofs, decklids, hoods, carpeting on floorboards since it is not designed to prevent heat transfer from sparks or spatter that are allowed to sit in one position on the paper, these will burn through.
- Duck Brand Freezer Sealing Tape
Duck Brand Freezer Tape is used with your favorite freezer paper to help save and protect your favorite meats, vegetables and other bakery goods until you're ready to use them. The tape is hand-tearable and its surface is writable with marker or pen which helps for listing contents and date. To use you should place your food in the center of your freezer paper (waxy side in) and then wrap the paper around the food. Then seal the paper with Duck Freezer Tape by wrapping it completely around the contents of the freezer paper. You should not place your food in direct contact with the tape. Unlike standard paper masking tape Freezer Tape stays adhered well in low freezer temperatures when wrapped around the contents of freezer paper.
- 3M Scotch 230 Drafting Tape
3M Scotch 230 Drafting Tape is designed for temporary layup needs, such as holding drawings, tracings, or other papers to blueprints or drawing boards. The tape is conformable and has low tack so it removes easily and cleanly without damaging work. Engineers and architects sometimes refer to this tape as "the second most useful tape in the world" since like duct tape it is very versatile and has many uses. Other uses include labeling and hanging lightweight drawings and posters. If standard masking tape is tearing your work upon removal then this is the tape to look at.