- JVCC Window Glazing Tape [Double-Sided, Closed Cell] (DC-WGT-01)
JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape which is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified. Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors. The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and very good strength. JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy-peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the insulated glass panel and window sash which helps prevent air and water leakage). Glazing tape is a cleaner and more convenient option over glazing putty and other messy or more difficult to apply products. Application Guidelines Clean debris from the surface with a clean, damp rag. The surface should be completely dry before proceeding with applying the tape. Without over-stretching the tape, apply the adhesive side to the surface. Use a weighted roller to ensure the bond from the tape to the surface and cut as needed, leaving a minimal gap. Make sure not to stretch the glazing tape around corners which can result in thinning on the outside and may create a bulge on the inside. Avoid overlapping the foam tape as it will not compress enough to avoid gaps. For small gaps, use a silicone or other sealant that will work with the JVCC DC-WGT-01 Window Glazing Tape product. Pull back a short length of the liner to create a tab. Center and install glass Remove the liner by the tabs and press the glass into the foam tape. Allow 24 to 72 hours for full adhesion strength. Make sure to store tape at room temperature and apply on a not-cold surface.
- Duck Brand Removable Mounting Tape [Double-Sided Foam]
There is no better alternative than Duck Brand Removable Mounting Tape for removing nails, screws, staples, and glue since they are safe and easy to use. Using this removable adhesive, you can hang crafts, photos, notes, posters, and decorations for holidays and parties in a quick and easy manner. Display your decor around your apartment, house, and dorm room, or organize your classroom or office without ever having to worry about damaging your walls—furthermore, the tape sticks to most surfaces, including uneven or textured surfaces, quickly and easily. Features & Benefits Easy-to-apply double-sided tape Please use it only for a short time Suitable for a variety of surfaces and textures It removes nails, screws, staples, and glue quickly Holiday and party decorations are easy to hang with this removable adhesive Organize your classroom or office without damaging your walls by displaying your decor Tape adheres quickly and easily, even to uneven or textured surfaces
- Scapa Polyethylene Foam Tape [Double-Sided, Closed Cell, 1/16 inch thick] (SR516V)
Scapa SR516V Double-Sided Polyethylene Foam Tape is constructed from a 1/16-inch (.0625-inch) thick white polyethylene foam that has been coated on both sides with strong, high-performance rubber adhesive. It comes on a 60-pound kraft release liner and is easy to apply to various surfaces. This rubber-based adhesive provides reliable adhesion to a wide variety of materials. Because of its high adhesive coat weight, Scapa SR516V double-coated foam tape can be effectively applied even to irregular surfaces. Its "quick stick" characteristic makes it easy to apply, while its high shear strength provides high load-bearing ability. The polyethylene foam offers good thermal insulation, and the composite material is easily die-cut. Features & Benefits Good adhesion to various materials High adhesive coat weight Adheres quickly upon application High shear strength Good thermal insulation Die-cuts easily Product Applications Mount household items (artwork, mirrors, hooks, soap dispensers, decorations) Mount items in businesses and public buildings (nameplates, reflectors, signs) Gasketing Spacing Sound deadening Paper arts and crafts projects (cards, scrapbook pages, binding) Tack down items on CNC machines (woods, plastics) Fasten loose moldings Whether you need thin or thick foam tape for your home or business project, FindTape has a large selection of high-quality products at great low prices. For help in finding the perfect tape to fit your needs, use our Advanced Tape Finder or email us at questions@findtape.com.
- Scotch Removable Double-Sided Mounting Squares (108S-SQ)
Scotch Removable Double-Sided Mounting Squares allow you to change your decor as quickly as inspiration strikes. These convenient, squares let you mount your favorite photos, kids' artwork and to do lists with their easy, stick-on design that doesn't damage your surfaces when it's removed. They're compatible with a variety of surfaces, from your walls, to your child's locker, to your office window. So keep on creating without regret with the easy-to-use, undetectable Scotch Removable Double-Sided Mounting Squares. Features & Benefits Great alternative to push pins and tacks. Size: 1 in. x 1 in. Removes easily without leaving any residue. To hold 1 lb., use 8 squares. Designed for hanging and securing lightweight items including artwork, photos and cards. Ideal for use on painted drywall, finished wood, metal, acrylic, tile, glass and dry erase. Photo-safe (determined in accordance with iso standard 18916). Not recommended for use on wallpaper, delicate surfaces or walls painted with flat paint. may damage some substrates upon removal.
- JVCC Polyethylene Foam Tape [Double-Sided, Closed Cell, 1/16 inch thick] (DC-PEF06A)
JVCC DC-PEF06A Double-Sided Foam Tape is a closed-cell cross-linked polyethylene 1/16 inch thick foam tape coated on both sides with a high performance solvent-based acrylic adhesive. Excellent quick-stick sealing with high shear properties for efficient operation and secure bonding. Good resistance to humidity, mild acids, oil, and grease. Excellent conformability and compressibility. Adheres well to textured and irregular surfaces. Applications include mounting nameplates, signs, small die-cast parts, mirrors, maps, etc. Used for sound and vibration dampening in business machines, industrial equipment, copy machines, electronic component packaging and glass panel mounts, seals, gaskets, etc. The acrylic adhesive system is recommended for outdoor applications due to its higher temperature, UV, weather, chemical, and plasticizer resistance. Country of Origin: Italy.
- JVCC Polyethylene Foam Tape [Double-Sided, Closed Cell, 1/32 inch thick] (DC-PEF03A)
JVCC DC-PEF03A Double-Sided Foam Tape is a closed-cell cross-linked 1/32 inch thick polyethylene foam tape coated on both sides with a high-performance solvent-based acrylic adhesive. Excellent quick-stick sealing with high shear properties for efficient operation and secure bonding. Good resistance to humidity, mild acids, oil, and grease. Excellent conformability and compressibility. Adheres well to textured and irregular surfaces. Applications include mounting nameplates, signs, small die-cast parts, mirrors, maps, etc. Used for sound and vibration dampening in business machines, industrial equipment, copy machines, electronic component packaging and glass panel mounts, seals, gaskets, etc. The acrylic adhesive system is recommended for outdoor applications due to its higher temperature, UV, weather, chemical, and plasticizer resistance. Country of Origin: Italy.
- Gorilla Tough & Clear Mounting Tape
Gorilla Tough & Clear Mounting Tape is a clear double-sided tape that mounts in an instant, for a long-lasting, weatherproof bond. The crystal clear adhesive tape won’t yellow over time and holds up to 15 pounds. Gorilla Tough & Clear Mounting Tape is perfect for indoor and outdoor projects and sticks to smooth and rough surfaces. Completing do-it-yourself projects is easy with this tough, double-sided tape. Mount, build, and repair! Product Features Double Sided Tape - coated with adhesive on both sides for easy hanging. 15lb Strong Hold - Sticks to smooth and rough surfaces.* Instant Hold - Delivers a fast and easy permanent bond. Weatherproof - For indoor and outdoor use. Crystal Clear Adhesive - Won't yellow over time. Bonds - Plastic, Metal, Wood, Glass, Brick, Ceramic, Stone, Cinderblock and more ** Notes *Weight limits may vary depending on surface texture, porosity and flatness of surface. Both surfaces must be completely flat to make full contact with adhesive. **Not for use on wallpaper, delicate surfaces, polyethylene and polypropylene plastics or other non-stick surfaces. LIMITED WARRANTY: This product must be used according to its instructions. No other warranties, either expressed or implied, are given or made. In no event will Gorilla Glue’s entire liability exceed the purchase price of this product.
- FindTape TeachersTape Double-Sided Mounting Tape [Removable Foam]
TeachersTape Double-Sided Removable Foam Tape Pads is a removable foam tape that comes off cleanly with no adhesive residue or tape scraps. This is a great alternative for masking tape, mounting clay, push pins and other more expensive fastening options. The tape works well with surfaces found and around the classroom such as painted concrete walls, chalkboards, whiteboards, wood, metal, plastic and glass. Items that can be hung up are posters, banners, artwork, banners, maps, safety information and much more. The tape allows the objects to stay hung until you choose to take them down. No residue or tape scrapes are left behind when taking the object off, resulting in a clean removal. Each pad contains 8 3/4-inch x 3/4-inch pieces. Note that the TeachersTape is sold as either a full-length roll (2,000 pads per roll or 16,000 3/4-inch x 3/4-inch pieces) or 8 pads per pack (64 3/4-inch x 3/4-inch pieces).
- JVCC Polyethylene Foam Tape [Double-Sided, Closed Cell, 1/8 inch thick] (DC-PEF12A)
When you need a high-performance double-coated tape that provides strong bonding and resistance to mild acids, humidity, grease and oil, choose JVCC DV-PEF12A Double-Sided Polyethylene Foam Tape. It's a closed cell cross-linked polyethylene 1/8 inch thick foam tape with solvent based acrylic adhesive. JVCC DV-PEF12A conforms and adheres to irregular and textured surfaces, and it has quick-stick and high shear characteristics. This double-coated polyethylene tape can be used outdoors. It's resistant to high temperatures, weather, UV, plasticizers and chemicals. Product Applications For mounting: Signs Nameplates Mirrors Maps Small die cast parts Many other items at home and in the workplace For sound and vibration dampening: Copy machines, other business machines Industrial equipment Glass panel mounts Electronic component packaging Gaskets, seals, etc. FindTape is your best source for the largest selection of high-quality tapes for home, business and industrial use. Country of Origin: Italy.
- Gorilla Heavy Duty Black Mounting Tape [Double-Sided]
Gorilla Heavy Duty Mounting Tape is a black, double-sided tape that mounts in an instant, for a long-lasting, weatherproof bond. The industrial strength double-sided tape delivers a heavy duty bond that holds up to 30 pounds. Gorilla Heavy Duty Mounting Tape is perfect for indoor and outdoor projects and sticks to smooth and rough surfaces. Completing DIY projects is easy with this tough, double sided tape. Mount, build, repair, and repeat! Product Features Double Sided Tape - coated with adhesive on both sides for easy hanging. 30 Pound Strong Hold - Sticks to smooth and rough surfaces.* Instant Hold - Delivers a fast and easy permanent bond. Weatherproof - For indoor and outdoor use. Bonds - Plastic**, Metal, Wood, Glass, Brick, Ceramic, Stone and more Notes *Weight limits may vary depending on surface texture, porosity and flatness of the surface. Both surfaces must be completely flat to make full contact with adhesive. **NOT for use on wallpaper, delicate surfaces, polyethylene, and polypropylene plastics or other non-stick surfaces. LIMITED WARRANTY: This product must be used according to its instructions. No other warranties, either expressed or implied, are given or made. In no event will Gorilla Glue’s entire liability exceed the purchase price of this product.
- Duck Brand Permanent Mounting Tape [Double-Sided Foam]
Duck Brand Permanent Mounting Tape is a double-sided foam tape coated with a permanent adhesive on both sides. It is ideal for permanent mounting applications such as crafts, nameplates, pictures, lists, pens, signs and more. Holds items up to 2 pounds strongly. Duck Permanent Mounting Tape multiple uses at home, the office, school, or in the car. It is not recommended for use on wallpaper, unfinished wood, drywall, plaster, stucco or surfaces that peel. The 60 inch and 15 ft long rolls are on a 1-1/2 inch diameter core and the 36 yard long roll is on a 3" diameter core. Application Instructions Clean and dry surface. Cut desired length of tape - should use 1-1/2 inches of tape length per 1/4 pound of weight. Position the exposed side of the tape on the back of the object, allowing for even distribution of weight. All tape must be in contact with object surface. Remove liner and press firmly into place for 30 seconds. The liner side of tape must be on the wall surface.
- Gorilla Tough & Clear Mounting Tape Squares
Gorilla Tough & Clear Mounting Tape Squares are pre-cut, clear, double-sided tape squares that mount in an instant, for a long-lasting, weatherproof bond. The crystal clear adhesive tape won’t yellow over time. This mounting tape holds 1 pound per 4 squares of tape. Gorilla Tough & Clear Mounting Tape Squares are perfect for indoor and outdoor projects and stick to smooth and rough surfaces. Completing DIY projects is easy with this tough, double sided tape. Mount, build, and repair! Features & Benefits Double Sided Tape - coated with adhesive on both sides for easy hanging. Strong Hold - Sticks to smooth and rough surfaces.* Instant Hold - Delivers a fast and easy permanent bond. Weatherproof - For indoor and outdoor use. Crystal Clear Adhesive - Won't yellow over time. Bonds - Plastic, Metal, Wood, Glass, Brick, Ceramic, Stone, Cinderblock and more ** Notes *Weight limits may vary depending on surface texture, porosity and flatness of surface. Both surfaces must be completely flat to make full contact with adhesive. **Not for use on wallpaper, delicate surfaces, polyethylene and polypropylene plastics or other non-stick surfaces. Gorilla Tough and Clear Mounting Tape Squares
- Scapa Polyethylene Foam Tape [Double-Sided, Closed Cell, 1/32 inch thick] (SR532V)
Scapa SR532V Double-Sided 1/32" Thick Foam Tape is a white polyethylene foam coated on both sides with a high-performance rubber based pressure sensitive adhesive. Applications for this double-sided foam tape include general mounting of mirrors, signs, hooks and soap dispensers. Can also be used for gasketing, spacing and sound deadening. Features & Benefits Rubber-based adhesive provides for a good specific adhesion to a wide variety of surfaces. Its high adhesive coat weight aids in adhesion to irregular surfaces. Good quick-stick makes application easy. High shear strength gives high load bearing ability. Foam gives good thermal insulation properties. Composite die-cuts easily.
- tesa Polyethylene Foam Tape [Double-Sided, 1/16 inch thick] (62936)
tesa 62936 Double-Sided Polyethylene Foam Tape is used for constructive mounting applications. It consists of a highly conformable PE foam backing with a tackified acrylic adhesive. Features a versatile adhesive for high immediate adhesion on numerous substrates. This tape also features a high ultimate adhesion level for a secure bonding performance. For inside and outside use. Features & Benefits Versatile adhesive for high immediate adhesion on numerous substrates. High ultimate adhesion level for a secure bonding performance. Fully outdoor suitable: UV, water and aging resistant. Compensates for differing thermal expansion of dissimilar materials. High immediate bonding strength even at low bonding pressure. Very good cold shock absorption. Applications Interior wall cladding panels. Bumper rails on commercial freezers. Injection moulded plastic parts. Mirrors and colored glass panels.