Electrical Tape Sitemap

JVCC EL7566-AW Premium Grade Electrical Tape is a premium professional-grade, all-weather PVC electrical insulation tape. It has a synthetic rubber adhesive and is flame retardant and cold resistant. This tape is 8 mils thick and is rolled onto a 1.5-inch diameter UL/CSA listed core. Electrical tape (or insulating tape) is an essential component of any installation, repair, and manufacturing project. EL7566-AW provides durable and reliable performance, designed to protect in the most challenging environments. This pressure sensitive tape is used to insulate wires and other materials that conduct electricity. With a strong, flexible PVC backing and superior insulating properties, JVCC EL7566-AW resists moisture, corrosion, alkalis, and acids.

Scotch 130C Linerless Rubber Splicing Tape is a highly conformable, linerless Ethylene Propylene Rubber (EPR), high-voltage insulating tape that provides excellent thermal dissipation of splice heat. The tape is designed for use in splicing and terminating wires and cables. Rated up to 194°F continuous operating temperatures and short-term 266°F overload service. It also meets industry specifications and has excellent physical and electrical properties (which are unaffected by the degree of stretch), which helps provide immediate moisture seal and void-free buildups. Scotch 130C is self-fusing which means it is an adhesive-free tape that fuses only to itself (no sticky residue left on surfaces). This tape should be applied in successive half-lapped level wound layers until the desired build-up is reached. Scotch 130C Linerless Rubber Splicing tape should be applied like any rubber tape; that is, the side of the tape wrapped inside the roll should be applied outside on the splice (tacky side up). This will help prevent the roll from getting progressively further away from the work area. To eliminate voids in critical areas, highly elongate 130C tape. Stretch tape in critical areas just short of the breaking point; doing so will not alter its physical or electrical properties. A brand of 3M. Primary Applications Primary insulation for splicing all types of solid dielectric insulated cables through 69 kV Primary insulation for building stress cones on all types of solid dielectric insulated cables up to 35 kV Jacketing (secondary insulation) on high-voltage splices and terminations Moisture-sealing electrical connections Bus bar insulation End-sealing high-voltage cables Motor leads Jacket repairs

Scotch Super 33+ Vinyl Electrical Tape is a black, 7 mil premium grade all-weather vinyl electrical insulating tape with an aggressive adhesive and elastic backing that enables it to easily conform to irregular surfaces for water-resistant electrical and mechanical protection. Scotch Super 33+ provides flexibility and easy handling for all-around performance. Its PVC backing with its excellent electrical insulating properties provides primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV rays, abrasion, moisture, copper corrosion, alkalis and acids, and it is flame-retardant. Excellent all-weather performance in cold to 0 degrees and it is designed to perform in a continuous temperature environment up to 220°F. A brand of 3M.

JVCC GC-SIL-7 Electrical Grade Glass Cloth Tape is coated with silicone adhesive and is conformable, printable, and chemical & solvent resistant. Designed for use in strategic area masking of areas in thermal and plasma spray applications. Used for insulation of electrical apparatus, coil wrap, and for sealing and bundling of non-electrical applications where flame retardancy or high heat resistance is required (e.g. welding). UL approval insulation class: 180°C Class H.

tesa 51036 PET Cloth Wire Harness Tape is a flag-resistant PET cloth wire harness tape with a solvent-free, advanced acrylic adhesive. With the new adhesive formula, tesa® 51036 is highly resistant to flagging and ensures secure closure. This anti-abrasion tape can withstand high temperatures and demanding environmental conditions. The acrylic adhesive of this door/mirror harness tape is compatible with halogen-free cable jacketing materials (PE/PP) and guarantees enhanced durability. Uses & Applications High abrasion resistance High temperature resistance 150°C/3000h High flag-resistant Excellent cable compatibility Resistant to aging Can withstand environmental influences Can be used for manual and automatic application Flame-retardant Tear-resistant Constant unwind force Flexible and smooth Country of Origin: Germany.

Scotch Color Coding Electrical Tape is a premium quality, 7-mil thick electrical insulating tape. Each roll is either 1/2 inch wide x 20 feet long or 3/4 inch wide x 66 feet long depending on the pack purchased. Flame-retardant, weather-resistant; resists UV rays, abrasion, moisture, alkalies, solvents, many acids. One of each of 9 colors comes in each set. Colors include blue, brown, green, grey, orange, red, violet, white and yellow (the 8-pack leaves out the grey). The 3-pack contains black, white and red. For indoor and weather-protected outdoor applications. Stretches to conform to virtually any shape that requires color-coded insulation. Outstanding electrical and mechanical properties make Scotch 35 excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. A brand of 3M. 35 is Scotch's product number or SKU for the colored rolls of tape. 33+ is their SKU for the black rolls. They also offer electrical tape SKUs such as 22 and 88.

3M Temflex 165 Vinyl Electrical Tape is a robust multi-purpose vinyl insulating tape that is well suited to a wide variety of environments, temperatures, and applications. It is constructed from a durable PVC and an aggressive adhesive to ensure tight wraps that provide longevity through resistance to unwrapping. This tough tape is flame retardant in addition to being resistant to abrasion, moisture, alkalis, solvents, acids, and corrosion of electrical conductors. Rated for 600 V, it is an excellent choice for primary insulation, complex wrapping, and abrasion/puncture resistance applications. After years of research focusing on sustainability, the Temflex 165 Tape is 3M’s first solventless electrical tape offering. This means that it is manufactured without the use of solvents during the manufacturing process, which lessens the overall environmental impact of the tape. The 5-year shelf life is also eco-friendly, ensuring no tape is wasted if not used for a long period of time and the durable construction will cut down on waste by reducing the amount of reapplications that are needed. Solid in packs of 10 rolls.

Scapa 175 Cloth Tape is a general-purpose conformable cotton cloth tape single coated with a natural rubber adhesive. It's non-thermosetting adhesive and backing are suitable for skin contact. The tape is paintable. Uses of the Scapa 175 Cloth Tape include: motor coil winding; wire harness wrap and other bundling applications; general purpose tape for surfaces requiring a high degree of stain or corrosion resistance where high tensile strength is not required; electrical tape applications; and finger taping.

JVCC EGPF-02 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures (good for high-temperature masking applications). Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-02 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.

Scotch 35 Color Coding Vinyl Electrical Tape boasts all the qualities professionals demand of their electrical tape to get the job done effectively, every time. This premium quality, 7-mil electrical insulating tape offers superior adhesion and durability, making it excellent for use in phase identification, color-coding of motor leads and piping systems and for marking safety areas. It is flame-retardant, weather-resistant (from 0° to 176° Fahrenheit) and resistant to UV rays, abrasion, moisture, alkalines, solvents, and many acids. It is ideal for both indoor and weather-protected outdoor applications and stretches to conform to virtually any shape that requires color-coded insulation. 3M vinyl tape is conveniently available in your choice of nine colors. Please note that 1/2-inch wide rolls do not come individually packaged (they are just shrink-wrapped). A brand of 3M. Product Applications Phase identification Insulating and protecting electrical connections Color-coding of motor leads and piping systems Marking safety areas

JVCC EGPF-01 Kapton™ Polyimide Film Tape is a 1 mil electrical grade Kapton alternative POLYIMIDE film coated with a high-performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after the manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-01 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining, and water immersion. Also can be used for bicycle rims.

Scapa 167 Cohesive Friction Tape is a black 100% cotton cloth tape, frictioned on both sides with an entirely solvent-free adhesive consisting primarily of synthetic rubber, inorganic fillers, and oil (the tape is designed to adhere to itself, not other surfaces). Uses for Scapa 167 Friction Tape include secondary wrap for electrical maintenance and spot (temporary) holding on wire harnesses. This tape can also be used as blade wrap for hockey sticks for better puck control. To apply this friction tape, simply unwind and place the adhesive side to the mounting surface and add firm pressure. Make sure your surface is free from oil or other surface contaminants such as powder, dust, or release agents. In addition, adhesive performance should be checked carefully when used on substrates containing plasticizers.

JVCC PTFE-5 Skived PTFE Film Tape is a 5 mil pure skived PTFE film tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness/coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip, and lubricity are required. High elongation of PTFE-5 permits tight wrapping and conforms to sharp bends/irregular surfaces.

tesa 51026 PET Cloth Wire Harness Tape is a high-strength tape designed for bundling and wire protection of automotive wire harnesses typically located in engine compartments of motor vehicles. Made from PET cloth and a solvent-free acrylic adhesive that is compatible with newer halogen-free cable jacketing materials (PE/PP). Because of the intended application, this anti-abrasion tape possesses excellent temperature, weather, and aging resistance in addition to being flame retardant. This door/mirror harness tape is fogging and halogen-free. The flexible and smooth construction allows for easy application on inconsistent surfaces. Can be used for manual or automatic applications. Country of Origin: Germany.

JVCC DVT-76 Dry Vinyl Tape is a non-adhesive plasticized polyvinyl chloride film tape. The tape is self-fusing so it will cling firmly to its own backing for a tight wrap when encircled around an object. Since JVCC DVT-76 is not coated with an adhesive it will not stick or adhere to other surfaces. JVCC DVT-76 Dry Vinyl Tape has high elongation and good strength, which makes for easy binding of wire harnesses for the automotive industry. Dry Vinyl Tape is also used for plating applications - high stretch, easy unwind, good "cling" characteristics and great conformability provides for superior masking in hard chrome and other plating applications.

tesa 51608 PET Fleece Wire Harness Tape is the universal tape for wire harness bundling in the passenger compartment. This anti-abrasion tape combines important features such as noise dampening and bundling strength while keeping harnesses flexible, thus supporting an easy harness assembly process at the OEM. This door/mirror harness tape features a rubber-based adhesive that is optimized for manual application. Features & Benefits Noise dampening Abrasion resistant. Flexible and smooth Tear resistant Stable unwind force Age-resistant Strong adhesion Hand-tearable

Scotch Super 88 Heavy-Duty Grade Electrical Tape is a premium professional-grade, 8.5-mil thick, all-weather vinyl insulating tape. It is designed to perform continuously in ambient temperatures up to 105°C (220°F). The tape is conformable for cold weather applications down to -18°C (0°F). It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion, and varying weather conditions. The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk. Scotch® Tape Super 88 is an Underwriters' Laboratories Listed and Canadian Standards Association Certified "Insulating Tape." The tape is compatible with solid dielectric cable insulations and with rubber and synthetic splicing compounds, as well as epoxy and polyurethane resins. It inhibits corrosion of electrical conductors and can be used for indoor and outdoor applications. A brand of 3M. Uses and Applications Primary electrical insulation for all wire and cable splices rated up to 600 volts and 105°C (220°F) Primary electrical insulation for 600-volt bus applications, and protective jacketing for high- and low-voltage bus Protective jacketing for high-voltage cable splices and repairs Harnessing of wires and cables

JVCC E-Tape Colored Electrical Tape is a general purpose all-weather PVC film electrical tape with an aggressive rubber resin adhesive that comes in OSHA colors. It is a UL/CSA listed electrical tape with a 1.5 inch inner diameter core. JVCC E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant. E-Tape 3/4" inch wide rolls are individually cello-wrapped and labeled, and other widths are custom slit and bulked packed.

Duck Brand Professional Series Electrical Tape is an all-weather, vinyl, electrical tape used for contractor or DIY applications that need extreme endurance and resistance against cuts and scratches, even under severely cold temperatures. Applications for this tape include repairing, installing, splicing, or bundling wires and other tools and materials. Its abrasion-resistant backing ensures that the wires are well insulated and can perform down to -10°C. This is a hi-stretch tape, which means it provides good protection even around thin wires, plus its superior adhesive keeps it working in a wide range of temperatures. Duck 667 Professional Electrical Tape is perfect to use for any indoor or outdoor electrical work. Features and Benefits Resistant to scratches and cuts. Meets and conforms to UL and CSA building codes Great for use with both indoor and outdoor repairs. Works well up to -10°C in freezing temperatures. Provides good protection for both thick and thin wires of all sizes. All rolls, except the color black, come packed in a canister.

Scotch 35 Mini Color Coding Vinyl Electrical Tape is a 7 mil thick, premium-grade, electrical tape that comes in various colors. This flame retardant tape is suitable for wire and phase identification, color coding of motor leads and piping systems, and for marking safety areas. Designed for use in industries such as automotive, commercial solutions, communications, design and construction, manufacturing, electronics, energy, transportation, and more! Scotch 35 Mini Vinyl Color Coding Electrical Tape provides electrical and mechanical protection with the combination of an aggressive, pressure-sensitive, rubber resin adhesive and an elastic PVC backing. This tape is flame retardant and is highly resistant to UV rays, abrasion, moisture, alkaline, solvents, many acids, as well as varying weather conditions. It stretches easily and adheres virtually in any shape. Ideal for insulating electrical wires and is compatible with synthetic cable insulations, jackets and splicing compounds. UL Listed, VDE, CSA Certified and RoHS compliant. This tape is 600V rated and withstands a temperature range of 14ºF to 221ºF (-10ºC to 105ºC). Please note that the mini rolls do not come canister packed. A brand of 3M. Features & Benefits Suitable for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Withstands a temperature range of 14ºF to 221ºF (-10ºC to 105ºC). UL Listed, VDE, CSA Certified and RoHS compliant. Flame retardant and is highly resistant to UV rays and varying weather conditions. The combination of the pressure-sensitive, rubber-resin adhesive and the PVC backing offers excellent electrical and mechanical protection.

Want what the pros use for your electrical job? Duck Brand Professional Electrical Tape is an all-weather, vinyl, electrical tape that is ideal for most contractor electrical work and DIY applications. This e-tape provides extreme endurance and resistance against cuts and scratches, even under severely cold temperatures. Hi-stretch means this professional-grade tape provides good protection—even around thin wires—plus its high-performance adhesive keeps working in a wide range of temperatures. Whether you’re repairing, installing, splicing, or bundling wires and other tools and materials, this tape stands up to the demands of your next electrical project. Duck Professional Electrical Tape is perfect to use for any indoor or outdoor electrical work. Features & Benefits Resistant to scratches and cuts. Meets and conforms to UL and CSA building codes. Great for use with both indoor and outdoor repairs. Works well up to -10°C in freezing temperatures. Provides good protection for both thick and thin wires of all sizes.

JVCC AF-GC-5 Aluminum Foil / Glass Cloth Tape is a thin tape that combines glass cloth with a laminate of aluminum foil. It provides high strength and reflectivity with excellent flexibility. The fiberglass cloth side is coated with a transparent, high-temperature resistant silicone adhesive. This product will withstand moderate grit blasting, is non-corrosive, and flame retardant (will not burn under open flame / extreme temperature exposure). This aluminum foil fiberglass cloth tape can be used as a masking tape in plasma spray applications, seaming and repair of heat and flame barrier curtains, securing thermal insulation on heating and ventilation ducts, protecting and shielding various missile and aircraft components such as control cables, harnesses, and fuel lines. It prevents the build-up of liquid metal on surfaces that must be protected.

Scotch 22 Heavy-Duty Grade Extra Thick Electrical Tape is a premium professional-grade, 10-mil thick, vinyl insulating tape. It is designed to perform continuously in ambient temperatures up to 80°C (176°F). The tape is conformable for cold weather applications down to -10°C (15°F). It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion, and varying weather conditions. The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk. Scotch® Tape 22 is an Underwriters' Laboratories Listed and Canadian Standards Association Certified "Insulating Tape." The tape is used for primary electrical insulation for all wire and cable splices rated up to 600 volts; primary electrical insulation for 600-volt bus applications, and protective jacketing for high- and low-voltage bus; protective jacketing for high-voltage cable splices and repairs; and harnessing of wires and cables. A brand of 3M. Features & Benefits Compatible with solid dielectric cable insulations. Inhibits corrosion of electrical conductors. For indoor or outdoor applications. Increased mechanical strength. Extra physical protection against abrasion.

3M Temflex 1700 General-Purpose Vinyl Electrical Tape is an economical UL listed / CSA certified electrical tape that provides electrical and mechanical protection for less demanding indoor and outdoor jobs. The 7-mil thick vinyl tape comes on a 1-1/2 inch diameter core and is an all-around good general purpose tape. This tape has excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion, and varying weather conditions. The rolls come individually shrink-wrapped. 3M Temflex 1700C can also be used for protective jacketing and harnessing. The tape is flame retardant, cold-resistant, and UL Listed and CSA Certified for 176°F. The 9-pack option consists of the following colors: blue, brown, gree, grey, orange, red, violet, white, and yellow.

JVCC PTFE-2HD Skived PTFE Film Tape is a 2 mil high density tensilized pure skived PTFE film tape with a high-temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness/coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip, and lubricity are required. JVCC PTFE-2HD provides higher tensile strength, lower elongation, and higher dielectric strength than regular skived film. It is primarily used for electrical applications listed above and for roll protection in flat die extrusion.

Duck Brand Friction Tape is used if you want to get a better grip on your tools, sports equipment or other handles that may have lost their grip. Duck® Friction Tape covers slick hand-holds and adds supportive grip to cables, wires and other materials needing increased surface texture. With its aggressive adhesion and ability to tightly wrap and overlap most held surfaces, it’s ideal for every toolbox or sports bag. Plus, its discreet black color goes great with whatever you can get your hands on. The tape is referred to as friction tape since its cotton cloth carrier is frictioned on both sides with an adhesive (the tape is designed to adhere best to itself, not to other surfaces).

Scotch 23 Rubber Splicing Tape is a 30-mil, premium-grade, highly conformable, rubber splicing tape. The self-fusing tape has a special polyester liner, which will not stick to the tape upon unwind. 3M Scotch 23 has greater physical and electrical properties that are unaffected by the degree of stretch. This tape is highly resistant to split, crack and flag when exposed to indoor or outdoor environments. It is designed to splice and terminate cables whose emergency overload temperatures can reach 266°F (130°C). A brand of 3M. Scotch 23 Rubber Splicing Tape is a non-vulcanizing, shelf-stable, self-fusing EPR (Ethylene Propylene Rubber), high-insulating voltage tape, which has a snakeskin liner that is easily removed as the tape is applied. It is compatible with synthetic cables insulations and paper insulations cables. 3M Scotch 23 can be used as an insulation for low-voltage applications as well as an insulation for splices up to 69,000 volts. Scotch 23 Rubber Splicing Tape is compatible with all solid dielectric cable insulation including Polyethylene (high and low density), Cross-linked Polyethylene (XLP), Polyvinyl Chloride (PVC), Butyl Rubber, Ethylene Propylene Rubber (PVC), and Oil-based rubber. Features and Benefits Rubber resin provides excellent adherence to irregular surfaces Temperature rated for continuous adhesion to 194°F (90°C) Self-fusing, ethylene propylene rubber backing, and highly conformable, rubber-resin adhesive Special polyester liner keeps tape protected and clean during application Applications Primary electrical insulation for splicing cable from 600 volts through 69,000 volts on all solid dielectric cables Primary insulation for building stress cones on cables up to 35,000 volts on all solid dielectric cables Jacketing on high-voltage splices and terminations Moisture sealing electrical connections Bus bar insulations End sealing high-voltage cables

Duck Brand Electrical Tape is an all-weather, vinyl, electrical tape used for contractor or DIY applications that need extreme endurance and resistance against cuts and scratches, even under severely cold temperatures. Hi-stretch means this professional-grade tape provides good protection—even around thin wires—plus its high-performance adhesive keeps working in a wide range of temperatures. Whether you’re repairing, installing, splicing, or bundling wires and other tools and materials, this tape stands up to the demands of your next electrical project. Features and Benefits Abrasion-resistant backing to keep wires well insulated. Meets and conforms to UL and CSA building codes. Great for use with both indoor and outdoor repairs. Works well up to -10°C in freezing temperatures.

Duck Brand Self-Fusing Rubber Splicing Tape is used to protect your electrical project from the elements. Instantly create watertight barriers around low voltage electrical splices or wire repairs with Duck® Brand Rubber Splicing Tape. How does this electrical tape create such a durable seal? Its design allows super conformability and stretch so it easily wraps around even the trickiest wires. Plus, its easy-tear and removable liner takes the frustration out of the job - no need for tools to cut it, just use your hands to tear the tape, even with the liner. Duck Self-Fusing Rubber Splicing Tape is designed for use in splicing and terminating wires and cables. The tape is self-fusing which means it is an adhesive-free tape that fuses only to itself (no sticky residue left on surfaces) so there won't be a noticeable tackiness to the tape. Also, be sure to remove the blue liner before applying the tape and the tape sticks best by being slightly stretched as you wrap it around the wires, not too much but just to give a little tension.

JVCC PTFE-GC-6 PTFE Film Glass Cloth Tape is a 5.4 mil PTFE film impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high-temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion-resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound). The image does not show a full 36-yard roll.

3M 69 Electrical Grade Glass Cloth Tape is a white glass cloth tape with a high-temperature thermosetting silicone pressure-sensitive adhesive. It is designed for use in 600-volt dry location applications motors, and transformers with and without varnish coating. Key attributes like high mechanical strength and resistance to high temperatures provide excellent performance. The thermosetting adhesive provides an increased bond once applied in areas of high ambient temperatures. The thermosetting adhesive provides elevated temperature performance up to Class N 392F (200C) temperature rating. 3M 69 provides insulation and solvent-resistant protection for use as coil cover, anchor, banding and core, layer and crossover insulation. This tape features a non-corrosive adhesive. It is conformable, printable and flame retardant. Features & Benefits High-temperature thermosetting adhesive has excellent solvent resistance. Class B rating to Class H provides for high temperature resistance. Glass cloth backing gives mechanical protection which lasts longer and improves safety. Uses & Applications Insulating electric and induction-type furnace power supply leads. Securing high-temperature, non-PSA insulation (such as asbestos and glass) in high-temperature areas. Securing Scotch® Fire Retardant Electric Arc Proofing Tape 77. Splicing wire SF and SFF rated 302° F (150° C), 356° F (180° C) . Reinsulating and repairing coils on mining machines. Splicing silicone-covered glass wire where splices require more abrasion resistance and mechanical strength than can be provided by silicone tapes Insulating Class "H" dry-type transformer leads. Insulating splices made on SA type wire in heat treat areas. Especially suited to high-temperature applications. Used in a variety of coil/transformer and motor applications, including an outer wrap for bobbin wound coils, banding arbor wound coils, lead pad hold down, end turn and lead anchor and connection.

JVCC E-Tape-SC (Small Core) Electrical Tape is a general-purpose all-weather black PVC film electrical insulation tape with an aggressive rubber resin adhesive. As the title suggests, JVCC E-Tape-SC tape is wound on a smaller 1-inch inner diameter core. E-Tape-SC Electrical Tape is most commonly used for wire and cable insulation and bundling. Electrical tape is frequently used to install low voltage cabling such as voice, data, video, alarm, and access control cabling. This tape is UL/CSA listed and is not flame retardant. Electrical tape, as known as insulating tape, is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. As it is easily torn by hand, can be written on, and generally removes from smooth surfaces cleanly, it is useful for a number of other applications such as labeling and temporarily attaching objects to one another. Electrical tape can be used to wrap tools or other items, such as drumsticks, for added grip.

JVCC FR-1 Friction Tape is a black cotton cloth with a non-corrosive rubber resin adhesive. Its cloth backing makes this tape easily hand tearable an extremely conformable. Highly resistant to humidity and galvanic corrosion. Holds tightly on rough and irregular surfaces, its adhesive system will not dry out. JVCC FR-1 Friction Tape is used for insulation and to protect industrial harnesses and electrical wires from physical damage caused by friction, or overwrapping low voltage splices and general electrical maintenance jobs.

Patco 5075 Wire Harness Attachment Tape is a tape used for wire harness attachment to headliners, flooring, and other surfaces in automotive, marine, recreational equipment, construction, and more. For permanent surface attachments. Creates an anti-squeak, anti-itch headliner barrier. The tape is conformable for curves and irregular surfaces and is a low weight, cost-effective alternative to foil. Patco 5075 creates an aggressive and permanent locking bond to fabric surfaces. Excellent longevity and high and low-temperature performance. Die cuttable. Patco 5075 has higher adhesion then Patco 5095, yet Patco 5095 is thicker and has higher tensile strength.

JVCC E-Tape Electrical Tape Rainbow Packs are packs which are comprised of either 8 or 10 different OSHA colors of general-purpose all-weather PVC film electrical tape. The tape has an aggressive rubber resin adhesive and the rolls are UL/CSA listed on a 1-1/2 inch inner diameter core. The 3/4 inch (19mm) wide pack consists of 10 colors which are black, blue, brown, green, grey, orange, red, white, yellow and then either pink or purple. The 2 inch (48mm) wide pack consists of 8 colors which are black, blue, green, grey, orange, red, white and yellow. JVCC E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant.

JVCC PTFE-10 Skived PTFE Film Tape is a 10 mil pure skived PTFE film tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness/coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip, and lubricity are required. The image does not show a full 18-yard roll.

JVCC PTFE-GC-10 PTFE Film Glass Cloth Tape is a 9.1 mil PTF impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high-temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails, and roll covers. The tape has a low friction surface and is abrasion-resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound). The image does not show a full 36-yard roll.

JVCC PTFE-GC-3 PTFE Film Glass Cloth Tape is a 2.8 mil PTFE film impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high-temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails, and roll covers. The tape has a low friction surface and is abrasion-resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound). The image does not show a full 36-yard roll.

JVCC PTFE-GC-5 PTFE Film Glass Cloth Tape is a 4.6 mil (PTFE) film impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high-temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion-resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound). The image does not show a full 36-yard roll.

Pro Tapes P-28 All-Weather Colored Electrical Tape is a premium grade, all-weather multi-purpose electrician's tape. Designed for color coding; phase insulation; identifying motor leads; insulating wire splices and connections; harness wrapping; protecting conduits; and radio, television, appliance repair work. Ideal for industrial maintenance applications and for wrapping tool handles. Resistant to UV rays, moisture, solvents, alkalis, and abrasion. It features a durable, flexible PVC film coated with a non-corrosive rubber-based adhesive. Pro P28 is CSA certified, UL listed, flame retardant, cold and weather resistant. On a 1.5-inch inner diameter core. Rolls come individually packaged in a plastic container.

Pro Tapes PRO-952 Kapton™ Polyimide Film Tape is a polyimide (Kapton alternative) film and silicone adhesive designed for high temperature masking applications, including the protection of printed circuit board gold finger contacts during wave soldering. It is used in electrical insulation applications meeting class H requirements. Features & Benefits Thin and conformable which enables masking of uneven surfaces. Wide operating temperature range up to 500°F. Excellent electrical insulation. Removes cleanly without adhesive residue after exposure to heat and chemicals.

Shurtape EV 077 BLK Professional Grade, UL Listed, Black Electrical Tape is a 7.0 mil, all-weather vinyl insulating tape used for electrical and mechanical protection in temperatures ranging from 0 to 220°F. Shurtape EV-077 is Shurtape's comparable product to 3M's Super 33+ electrical tape product. UL Listed and CSA Approved, EV 77B black electrical tape is lead free, flame retardant, and is engineered with a polymeric backing construction, as well as a specialized method of bonding the adhesive to the vinyl backing, which allows the tape to be highly conformable and deliver a moisture-tight seal, even in extreme temperatures. Uses & Applications For primary insulation of electrical splices up to 600 V. Also used as a jacketing on high voltage splices and repairs. Can be used when wrapping wire harnesses and cables. For indoor and outdoor use. Features & Benefits All-weather performance. Highly conformable. Lead free. Hand-tearable. Flame retardant. Resistant to UV, oils, acids, alkalies, corrosive chemicals and water. High tensile strength. Also available in a variety colors. High performance in a wide temperature range.

3M 5480 Skived PTFE Film Tape uses a combination of low friction/non-stick polytetrafluoroethylene (PTFE) and a powerful silicone adhesive to form a tape that can be used as a quick solution to reduce friction between moving surfaces or function as an anti-stick or easy-release medium. PTFE’s exceptional temperature range and chemical resistance make it ideal for use on equipment that is heated/may experience temperature increases while in use, as a layer of protection from chemicals that may cause buildup, or to assist in the movement of web materials in roll wrap applications. Excellent in MRO applications to reduce squeaking, rattling, and reducing overall machine noise. Suitable for use in temperatures ranging from -65° (-54°C) to 500°F (260°C). Uses & Applications Roll-wrap for web processing, belts, and plates where sticky materials and inks may occur Squeak and noise reduction Shielding and protecting against chemicals Mold release for composite bonding

Duck Brand Heavy Duty Electrical Tape stands up to repairs and fixes requiring extreme endurance for long-lasting applications. Whether you’re repairing, installing, bundling or splicing wires, this tape’s high performance adhesive takes on severe weather temperatures and conditions. Use it indoors or use it outdoors - use it whenever the job needs something heavy duty to protect surfaces or simply hold, repair and bundle your tools or other materials. Features & Benefits: Hi-stretch to conform around thin and/or tightly wrapped wires Abrasion resistant backing for protection against scratches and cuts 8.5 mils vinyl thick tape for all-weather durability Meets UL and CSA building codes Vinyl tape for all-weather durability