Film & Vinyl Tape - Site Map

Tape Site Map > Film & Vinyl Tape

  • This category includes Film & Vinyl Tape used for color coding, marking, holding, shrink wrapping and tapes used to create a low friction surface.
    • JVCC V-36P Premium Colored Vinyl Tape

      JVCC V-36P Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; temporary decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape and it is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape. JVCC V-36P Premium Vinyl Tape features include: Long shelf life. "Write-on" capability. Provides very effective vapor/moisture barrier. Highly conformable and good abrasion/impact/rupture resistance. Resistant to aging, sun, water, fungus/bacteria, oil, acids/alkalies/corrosive chemicals. No corrosion to copper, brass, steel, or aluminum.

    • JVCC V-36 Colored Vinyl Tape

      JVCC V-36 Colored Vinyl Tape is a durable tape used for marking floors/lanes, color coding, decorating, temporary striping on vehicles and boats, and to identify restricted or hazardous areas. Used extensively on school gym floors all kinds. Helps with safety coding to meet OSHA requirements. Can also be used for masking of hard chrome plating and anodizing, harness and pipe wrapping, and duct and joint sealing. JVCC V-36 Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape. Features include: "Write-on" capability. Highly conformable and good abrasion/impact resistance. Provides vapor/moisture barrier. Resistant to aging, sun, water, fungus/bacteria, acids/chemicals. No corrosion to copper, brass, steel, or aluminum.

    • JVCC UHMW-PE-5 UHMW Polyethylene Film Tape (5 mil carrier)

      JVCC UHMW-PE-5 UHMW Polyethylene Film Tape is a 5 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on a white paper liner. Image does not show a full 36 yard roll.

    • Scapa 136 Polyethylene Film Tape

      Scapa Polyflex 136 Polyethylene Film Tape is a heavy-duty polyethylene backed, single coated tape with a synthetic rubber adhesive. It is used for convention center floor marking, surface protection, wire identification, seaming/splicing of polyethylene sheeting and general purpose holding. If you are looking for a more adhesive tape (compared to a lower adhesive vinyl tape like JVCC V36-P) to permanently repair mats this is a good choice (see JVCC WMT-7 for temporarily seaming wrestling mats). It is also used in the boating and RV industry for taping seams and patching holes in poly sheeting. Unlike a vinyl floor marking tape a polyethylene tape like 136 will not stretch or break if laying across a large area like a convention center floor. Scapa Polyflex 136 features include a tacky adhesive which bonds well to most surfaces over a wide temperature range; excellent low-temperature bonding; product is very conformable; it maintains a watertight seal in most weather conditions; good tear characteristics; and a low residue adhesive. This tape does not have UV inhibitors. Scapa 136 is not opaque, but is semi-transparent or translucent.

    • ISC Helicopter-OG-HD Surface Guard Tape (14 mil Heavy Duty Outdoor Grade)

      ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape (14 mil Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter blade / leading edge wing tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. The tape is clear/transparent and is supplied on a white paper release liner. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, skis, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Also used to protect bar code labels under extreme conditions like at ski resorts. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. Please be advised the color of the removable paper liner used on this product will be changing color (it has the same release technology) since the paper mill ISC gets it from has changed. Also this product was mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report).

    • ISC Helicopter-OG Surface Guard Tape (8 mil Outdoor Grade)

      ISC Helicopter-OG Surface Guard Tape (8 mil Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter blade / leading edge wing tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. The tape is clear/transparent and is supplied on a white paper release liner. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Also used to protect bar code labels under extreme conditions like at ski resorts (to protect skis please see ISC's Helicopter-OG-HD tape which provides more aggressive adhesion). Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. * Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package). Please be advised the color of the removable paper liner used on this product will be changing color (it has the same release technology) since the paper mill ISC gets it from has changed. Also this product was mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report).

    • Polyken 824 Shrink Wrap Tape (Polyethylene Film)

      Polyken 824 Shrink Wrap Tape is also known as hull preservation tape and is used for taping edges of shrink wrap to a boat's hull. Also used by auto salvage and reclamation yards. It has a polyethylene film and rubber based adhesive. UV protected for prolonged expose to sunlight. Polyken 824's specially-designed adhesive eliminates residue even after extended periods of exposure. It is also conformable so it adheres to rough surfaces and is also easy to unwind. Shrink Wrap Tape is used to seam shrink wrap film sheeting together; patch holes in shrink wrap; secure waste disposal bags; and to hold doors in place. It is also used for stucco & plaster masking and other outdoor masking applications where UV resistance is required. Our distributor gets this made specially from Berry Plastics in white with serrated/pinked edges for easy tearing - no cutting is needed.

    • JVCC GLW Glow in the Dark Tape (6 Hour)

      JVCC GLW Glow in the Dark Tape is a flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants. JVCC Glow in the Dark Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adjusted eye for up to 6 hours (to the night-adjusted eye it is visible, but it would not compare it brightness to say a standard flashlight). It also recharges. In its uncharged state the tape has a white/cream color and when glowing the tape has a luminescent lime green color. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. The tape is offset, screen, flexo, and thermo transfer printable. Adhesive has a 24 hour dwell time. Note: 6 foot glow strips are shipped in rolled format (typically 10 glow strips will be rolled together in a bag).

    • Patco 5560 Removable Protective Film Tape

      Patco 5560 Removable Protective Film Tape is a clean removal tape which combines a durable and conformable polyethylene film backing with a moderate tack, low adhesion acrylic adhesive which will not leave residue or damage most surfaces. it is used for general protective masking applications on plastics, glass, and metal that require temporary surface protection through assembly or shipping. Patco 5560 is highly conformable; abrasion, moisture and solvent resistant; and removes cleanly and easily. This tape does have moderate tack adhesive on one side which allows it to stay adhered during a shipping process; it is not a static-cling-only type tape (see 3M 2112C for a very low adhesive protective film tape).

    • JVCC PES-32G Polyester Film Packaging Tape

      JVCC PES-32G Polyester Film Packaging Tape is a heavy-duty polyester film packaging tape used to meet the highest of quality & performance requirements. It is used for packaging, sealing, and splicing. This tape features extremely aggressive hot melt rubber based adhesive that insures instant holding power and provides a quick reliable seal when used for strip closure of regular slotted containers, overlap sealing, and fiber drum sealing. This polyester carton sealing tape is used for government packaging since it doesn't stretch or elongate like standard BOPP film packaging tape does.

    • JVCC OPP-22CC Crystal Clear Packaging Tape

      JVCC OPP-22CC Crystal Clear Carton Sealing Tape is a 2.2 mil biaxially oriented polypropylene film tape coated with a solvent based acrylic adhesive. See-through "CRYSTAL CLEAR" imprinted on 3" core. Crystal clear tape is non-yellowing and UV resistant with a long shelf life. Used for carton sealing. May also be used for lamination and in cold temperature applications.

    • Patco 5067-53 Greenhouse Tape (UV Stabilized)

      Patco 5067-53 Greenhouse Tape is a clear polyethylene greenhouse repair patch tape designed for use outdoors for seaming and patching applications on greenhouse films. Also can be used for general purpose sealing, splicing, seaming, surface protection and temporary hold down. Features of Patco 5067-53 include being UV and weather resistant, bonding aggressively to greenhouse films, and that it can withstand extended exposure to the elements. The tape comes on a release liner which provides ease of use on wide width applications.

    • JVCC BOOK-20CC Crystal Clear Book Repair Tape

      JVCC BOOK-20CC Crystal Clear Book Repair Tape is an ultra clear polypropylene film tape with a non-yellowing solvent-based acrylic adhesive. It is used for book repair, label protection and lamination. JVCC BOOK-20CC is also UV resistant.

    • PrimeTac MS-BW Mini Stretch Banderwrap Stretch Film

      PrimeTac Mini Stretch Banderwrap Stretch Film is a 5-inch wide hand film wound on 3-inch cores. The film clings to itself so unlike adhesive tape there is no residue left when it is removed. Rolls are lightweight. PrimeTac Mini Stretch is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Applications include distribution; moving & storage; and it is great for combining items for freight consolidation. NOTE: one handle (shown in the photo) ships with each full case order. A handle does NOT ship with individual roll orders.

    • Pro Tapes Pro-Glow Glow in the Dark Tape (10 Hour)

      Pro Tapes Pro-Glow Glow in the Dark Tape is a phosphorescent vinyl film tape which glows in total darkness after exposure to artificial or natural light. The photoluminescent light source is designed to absorb energy from any nearby ambient light such as fluorescent lamps or sunlight. Once the source of extraneous light is removed Pro-Glow emits a light source of its own which is visible to the night-adjusted eye. When fully charged Pro-Glow provides luminance for up to 10 hours. There isn't a limit to the number of times this product can be recharged (also remains highly effective for use for up to 6 years). It will glows brightest for the first 15 to 30 minutes after charging has ceased, but will remain visible in a totally dark room to the night-adjusted eye; however it would not compare it brightness to say a standard flashlight. In its uncharged state the tape has a whitish/yellow color and when glowing the tape has a luminescent lime green color. Recommended for interior applications only. Pro Glow is used to spike stages for the placement of scenery and to mark exits, light switches and panels in dark areas. The tape's flexible backing is conformable and easy to cut.

    • PrimeTac MS-EH Mini Stretch Extended Handle Stretch Film

      PrimeTac Mini Stretch Extended Handle Stretch Film is a 5-inch wide hand film wound on 1-inch cores with a 4-3/4 inch application handle (a disposable handle is built into each roll). The film clings to itself so unlike adhesive tape there is no residue left when it is removed. Rolls are lightweight. PrimeTac Mini Stretch is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Applications include distribution; moving & storage; and it is great for combining items for freight consolidation.

    • Patco 5068 Greenhouse Repair Tape (Short Term)

      Patco 5068 Greenhouse Repair Tape is a short-term economy-grade greenhouse patch, seal & repair tape. Used for general purpose sealing, splicing and seaming as well as surface protection and temporary hold-down applications. Patco 5068 Greenhouse Tape is conformable to irregular surfaces, performs well over a wide temperature range, is optically clear & hand-tearable; will not crack or crease at low temperatures, has an easy unwind and provides an excellent moisture barrier. This tape is not UV stabilized.

    • JVCC MPF-01 Metalized Polyester Film Tape (Mirror Reflective)

      JVCC MPF-01 Metalized Polyester Film Tape is a metallized (aluminized) polyester mylar film with a brilliant, vibrant mirror-like finish; coated with an aggressive long lasting clear acrylic adhesive system. Tapes have excellent chemical and thermal stability. Silver can be qualified to meet Federal Specification #L-T-100B, Type II. Gold is PVC-free and can be laser cut. Metalized Polyester Film Tape is used for reflective shielding; industrial & graphic art applications; decorative trim, nameplates, electric appliances an and advertising displays. It is also suitable for micro film splicing and can be used in photo sensing applications to detect spices and to facilitate roll changeovers (should test first). The tape is self-wound (no release liner) and all colors of MPF-01 are silver on the exposed adhesive-side of the tape. JVCC MPF-01 complies with the European RoHS 2002/95/EU, 2011/65/EU directives. NOTE: the colors green and blue have been discontinued in this tape and limited inventory now remains.

    • 3M Scotch 8067 All Weather Flashing Tape

      3M Scotch 8067 All-Weather Flashing Tape is used to create a self-adhesive barrier for use in the construction industry to seal window and door openings against moisture infiltration and intrusion. The tape has a unique, aggressive acrylic adhesive and a thin, proprietary flashing membrane backing. The translucent 9.9 mil thick tape is tear resistant and durable yet still fits conveniently into corners and under siding and comes. Comes on a split paper release liner for faster application with easy and accurate positioning of the tape. 3M 8067 is high tack (can even adhere to damp surfaces), self-sealing around nails, conformable, thin and resists UV exposure for up to six months. It is eligible for LEED® compliance credits and meets AAMA 711-05. Application used include sealing around openings in exterior walls; joints around sills, jambs and heads of rectangular windows in wood frame construction; and also around other wall interruptions in non-roof areas, such as thresholds, dryer vents and hose bibs. Also for flashing, protecting, seaming, splicing and waterproofing in the building and construction, window and door, roofing and siding industries.

    • JVCC V-36P-PC Premium Colored Vinyl Tape (Plastic Core)

      JVCC V-36P-PC Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; temporary decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P-PC Vinyl Tape is wound on a 3 inch diameter plastic core (unlike standard vinyl tape which comes on a standard cardboard core). This tape may be used for clean room applications; however please note rolls do NOT come individually bagged if that is a requirement of your cleanroom (they just come bulk packed). This vinyl tape is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape. JVCC V-36P-PC Premium Vinyl Tape features include: Long shelf life. "Write-on" capability. Provides very effective vapor/moisture barrier. Highly conformable and good abrasion/impact/rupture resistance. Resistant to aging, sun, water, fungus/bacteria, oil, acids/alkalies/corrosive chemicals. No corrosion to copper, brass, steel, or aluminum.

    • JVCC PPT-3R Polyester Circuit Plating Tape

      JVCC PPT-3R Polyester Circuit Plating Tape is a 1 mil polyester film coated with 2 mils of silicone adhesive. It resists fumes and chemicals, and leaves minimum residue on removal. It is translucent and allows visibility of circuitry after masking. Film will not break or split during application or removal. A protective tape designed to perform well in all phases of masking operations during printed circuit board production. Engineering grade plating tape. Protects surfaces from splashes and chemical fumes in tin/lead striping and gold tab plating. Suitable for painting. Can also be used for splicing of certain silicone coated papers and films.

    • 3M Scotch 2112C Polyethylene Protective Tape

      3M 2112C Polyethylene Protective Tape is a 2 mil thick film with a low-tack adhesive system to help provide temporary protection of many polished metals, smooth plastics and glass materials with minimum adhesion buildup and clean removal. Its transparent backing allows visual inspection without tape removal and its acrylic adhesive is non-corrosive and non-staining. The tape is very low tack and is static-cling like. 3M 2112 Application Ideas: Automotive – trim, bi-metal aluminum-polished gloss, stainless steel, chrome, and interior plastic. Graphic Arts – gloss screen printed nameplates, aluminum signs painted gloss and polished polycarbonate. Plastics – gloss high-pressure laminates. Metals – anodized bright specular aluminum. Architectural Panels and Garage Doors – smooth and painted-gloss surfaces. Please note 3M 2112C rolls are wound very tightly so when storing rolls please keep them under pressure so they do not telescope or distort (i.e. keep flat with a weight on top). By the time rolls are received they've already typically begun to telescope out; especially for rolls less than 4 or 6 inches in width.

    • JVCC PPT-36G Silicone Splicing Tape

      JVCC PPT-36G Silicone Splicing Tape is a translucent emerald green 2 mil polyester film with 1.6 mils of a nonresiduing pure silicone adhesive. One of the cleanest and strongest splicing tapes available. Its high adhesion and extremely stable adhesive system give it excellent resistance to photo processing chemicals, acids, oils, solvents, aging, staining and water immersion. A superior performance leader card splicing tape. Used for splicing siliconized papers, films and non-woven materials in converting. Used for masking adhesive seams in metal bonding processes.

    • 3M Scotch Scotchcal Striping Tape

      3M Scotchcal Striping Tape is typically used to create single stripe patterns on vehicles and boats - in order to match existing stripes or to create original striping designs on them. The tape also resists gasoline and chemicals. Primary uses include commercial vehicle, marine, railroad and bus graphics; sign graphics; and pinstriping. 3M Scotchcal is offered in 25 different color patterns.

    • Shurtape PE-444 Stucco Masking Film Tape (UV resistant)

      Shurtape PE-444 Stucco Masking Film Tape is a UV resistant polyethylene film tape used to temporarily mask surfaces during stucco application and painting. It has a special synthetic high-tack, residue free, adhesive which provides a watertight seal in severe environments and weather conditions. Typical applications for Shurtape PE 644 include masking window and door frames during stucco application as well as masking wood, metal, vinyl, and tile during painting. Also used for greenhouse repair (the tape provides for limited UV exposure).

    • JVCC OPP-34CC Premium Grade Crystal Clear Packaging Tape

      JVCC OPP-34CC Crystal Clear Carton Sealing Tape is a 3.6 mil biaxially oriented polypropylene film tape coated with a solvent based acrylic adhesive. See-through "CRYSTAL CLEAR" imprinted on 3" core. Crystal clear tape is non-yellowing and UV resistant with a long shelf life. Used for carton sealing. May also be used for moderate demand lamination and in cold temperature applications.

    • Shurtape JLAR Clear to the Core Tape (Permacel J-LAR)

      Shurtape JLAR Clear to the Core Tape is a glossy, brilliantly clear film tape designed expressly for light packaging, gel and book repair, paper repair/mending, and holding applications. Typical applications include overlamination, label protection and light carton closure. J-LAR will not yellow with age nor discolor packages or objects after being applied. Ideal for use with counter and desk dispenser units. Stronger than cellophane or acetate. Permacel J-LAR is now manufactured by Shurtape.

    • Shurtape PP-803 Ultra Clear to the Core Packaging Tape (Permacel J-LAR 910)

      Shurtape PP-803 Ultra Clear to the Core Tape is an ultra clear, premium label protection and packaging tape. It is used for label protection; carton sealing in a broad temperature range; and over-lamination for instructions, drawings, etc. Shurtape PP803 features a high tack adhesive; excellent holding power; and a backing which is crystal clear (no streaks, dust or other contaminants - 100% clarity). This is Shurtape's replacement product for the old Permacel J-LAR 910.

    • JVCC PTFE-2HD Skived Teflon Tape (2 mil carrier, High Density)

      JVCC PTFE-2HD Skived Teflon Tape is a 2 mil high density tensilized pure skived Teflon™ (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. JVCC PTFE-2HD provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film. It is primarily used for electrical applications listed above & for roll protection in flat die extrusion.

    • Shurtape PE-100 Temporary Flooring Tape

      Shurtape PE-100 Temporary Flooring Tape is a specialty tape used on wood floors with water-based finishes to secure protective coverings and for creating temporary lines & boundaries on gym floors. PE-100 FloorMate tape comes up clean on a properly prepped/cured wood finish, is conformable enough to create curves, is more durable than paper tapes, removes without tearing or splintering, works for paint masking and is available in three colors. Test tape in an inconspicuous area before using. It is for temporary use only. Finish damage is difficult and expensive to repair on wood floors, so assure preparation and finish application are done per finish manufacturer's recommendations. Allow finish to cure fully before applying tape. Remove tape slowly prior to 30 days on the floor. LAB TESTED FINISHES Water-based: Bona Traffic DuraSeal polyurethane Hillyard Contender Loba Hybrid Loba WS Easyfinish NewAge Full Court Press StreetShoe Basic StreetShoe 275 Varathane Floor Finish X Terra Zinsser polyurethane Solvent-based: Deft Defthane polyurethane Hillyard 350 Gym Finish

    • JVCC WMT-7 Wrestling Mat Tape (long 180' length)

      JVCC WMT-7 Wrestling Mat Tape is clear high quality polyethylene film tape (not vinyl) which is great for seaming together wresting mats. It is designed to remove cleanly without leaving adhesive residue behind. JVCC WMT-7 is a 4.5 mil low density polyethylene film tape coated with a synthetic rubber adhesive (7 mils total thickness including adhesive coating). Its tough polyethylene backing offers good abrasion and tear resistance and its low tack adhesive suitable for surface protection applications. More gym and sport uses include seaming mats for gymnastics, mixed martial arts, and indoor trampoline facilities. Other benefits of the tape include lower elongation than vinyl tape (doesn't stretch as much) and it also offers very good conformability.

    • JVCC UHMW-PE-10 UHMW Polyethylene Film Tape (10 mil carrier)

      JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on a white paper liner.

    • Patco 1800 Flame Retardant Galley Tape

      Patco 1800 Flame Retardant Galley Tape, aka 1800FR, is an aircraft corrosion inhibitor tape designed for water seal applications in main cabin wet areas (galleys, lavatories, & entryways). Features of Patco 1800FR include: tough, conformable and moisture resistant; permanent and flame retardant; allows wide width usage; helps prevent corrosion on floor structures; will not delaminate; meets FAR requirements; compatible with most sealants; fast application; and can be die-cut to various shapes.

    • Patco 502A Clear Polyethylene Film Tape

      Patco 502A Clear Polyethylene Film Tape combines the conformability, abrasion, and chemical resistance of polyethylene film with an aggressive permanent adhesive system. It is designed as a general purpose sealing, splicing, and seaming tape. Use for protective film & temporary hold down, material processing, and industrial fabricating applications. Patco 502A features include: conformability to irregular surfaces; good temperature resistance over a wide range; high adhesion & cohesion; long term stability; will not crack or crease at low temperatures; yields a permanent bond with virtually no edge bleed; adhesive will not fail after extended periods.

    • Shurtape HW-300 Housewrap Sheathing Tape (UV Resistant)

      Shurtape HW-300 Housewrap Sheathing Tape is a water-based acrylic housewrap tape designed as a closure system and/or operates as a vapor seal on interior and exterior vapor barrier materials. HW 300 can be used for repair of any housewrap materials in addition to its usefulness for new construction. This tape may be applied in vast temperature ranges and humid conditions. It seals seams and joints on all types of housewrap, sheathing, insulation or vapor barrier materials. It is UV resistant and is coated with an aggressive permanent adhesive with high shear and holding power capabilities. House wrap tape is applied over the seams of installed housewrap to contribute towards a secondary line of defense against exterior moisture infiltration of the wall envelope. It helps to maximize energy efficiency by sealing the gaps, cracks and crevices where air can easily enter the home and ultimately affect your heating and cooling costs.

    • Patco 503A Colored Polyethylene Film Tape

      Patco 503A Colored Polyethylene Film Tape offers durability, excellent conformability and a solvent resistant backing combined with an aggressive permanent adhesive system. Used as a protective overlaminate and as a thermal insulation outer wrap. Features of Patco 503A include: excellent moisture barrier; UV and solvent resistant; excellent long-term aging; provides a permanent seal indoors or outside; will not crack or craze after extended exposure. This tape is also sometimes referred to as a Bondbreaker tape. Other application uses include decorative markings, color coding and striping.

    • JVCC CFT-HD Clear Film Tape (Overstock)

      JVCC CFT-HD Clear Film Tape is a clear polypropylene film coated with an acrylic adhesive. It is designed for gel and book repair, paper repair/mending, and holding applications where strength is extremely important. It’s also an industrial strength, brilliantly clear film tape developed for use in packaging, carton and package sealing, overlays and laminating, and label protection. The tape is designed to not yellow with age nor discolor packages or objects after being applied. Ideal for use with counter and desk dispenser units. JVCC CFT-HD is stronger than cellophane or acetate. NOTE: This is an overstock product and limited stock is available. Please see Shurtape JLAR or JVCC PES-32G for an alternative.

    • Nashua 680004 Heavy Duty Tarp Tape

      Nashua Heavy Duty Tarp Tape is a black polyethylene film tape used for sealing and seaming of heavy-weight poly tarps. It has a rubber-based adhesive suitable for 6 to 8 months of outdoor exposure (it is designed for extended outdoor exposure). It is UV resistant and has a tough polyethylene backing. Nashua Tarp Tape has the tensile strength of duct tape without the irregular adhesive surface. It is highly conformable with smooth adhesive to provide superior contact to difficult surfaces.

    • JVCC PTFE-10 Skived Teflon Tape (10 mil carrier)

      JVCC PTFE-10 Skived Teflon Tape is a 10 mil pure skived Teflon™ (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. Image does not show a full 18 yard roll.

    • Patco 5400 Preservation & Sealing Tape (UV Resistant)

      Patco 5400 Preservation & Sealing Tape is a film tape which combines a heavy duty, weather resistant polyethylene backing with a non-staining, clean removal, rubber based adhesive. Patco 5400 is U.V. and weather resistant as well as highly conformable (adheres snugly to contoured and irregular surfaces). It is used for long term preservation, sealing, and splicing applications. Also for direct protective masking on aircraft, trucks, boats, and industrial equipment during outdoor storage. It can be used in conjunction with outdoor shrink film to secure and seal the shrink film border firmly during transportation or extended outdoor exposure. It is designed to not leave adhesive residue, stains, or ghosting on most surfaces. Excellent low temperature operating adhesion.

    • JVCC DVT-76 Dry Vinyl Tape

      JVCC DVT-76 Dry Vinyl Tape is a NON-ADHESIVE plasticized polyvinyl chloride film tape (the tape clings firmly to its own backing for a tight wrap when encircled around an object; however since it is not coated with adhesive it will not stick or adhere to other surfaces). The tape's high elongation and good strength permit trouble-free binding of wire harnesses for the automotive industry. Dry Vinyl Tape is also used for plating applications - high stretch, easy unwind, good "cling" characteristics and great conformability provide for superior masking in hard chrome and other plating applications. Note: This product is being discontinued in black and only yellow inventory now remains.

    • JVCC V-DCD Vinyl Dots On A Roll

      JVCC V-DCD Vinyl Dots On A Roll are SPVC vinyl die cut dots on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic. Another use for the 1/2 inch diameter yellow dots is to use as a marker strip on the nose of checker-plate stair treads to meet the new codes that require a contrasting color on the front of every stair tread. The dots slip down inside the checkers as a clean strip at the front of the tread and don't wear or mar. For the 1/2, 3/4 and 1 inch diameter dots there are 1,000 dots on a roll and all other sizes have 500 dots on a roll.

    • JVCC VEPT-65 Vinyl Electroplating Tape

      JVCC VEPT-65 Vinyl Electroplating Tape is a SPVC masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process and as a protection tape for shot peening applications. The tape is extremely conformable, durable and highly resistant to oil, acid, alkalines and corrosive chemicals. It also has excellent adhesion to metals and plastics. NOTE: Our converter has recently started getting this tape from another supplier so please see the revised specifications for the tape below.

    • 3M Scotch Scotchlite Reflective Striping Tape

      3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicle, boats, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets). The black film, which reflects whitish/tan at night when hit by light, has a typical coefficient of retroreflection of 30. Meets NFPA requirements. Please note 3M uses the same Scotchcal retail packaging for all their striping tapes (whether they are reflective or not); however this tape is Scotchlite reflective striping tape and the correct product numbers listed below will be on the retail packaging: 79902 - 1/4 inch wide black 79905 - 1/4 inch wide blue 79903 - 1/4 inch wide gold 79907 - 1/4 inch wide orange 79904 - 1/4 inch wide red 79901 - 1/4 inch wide silver / white 79908 - 1/4 inch wide yellow 79922 - 1/2 inch wide black 79942 - 1 inch wide black Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle Blue Orange Red Black Yellow Gold Silver/White 0.2° -4° 10 20 20 30 65 70 100

    • JVCC GLW-S Glow in the Dark Signaling Tape

      JVCC GLW-S Glow in the Dark Signaling Tape is used for general guiding and for marking signs. Use to mark anything critical to see like light switches, instruments, controls and emergency exits when the lights go out (or during disasters like fire, earthquake, power failure, etc.). The tape comes with a peel-off release liner. JVCC GLW-S photo luminescent "glow-in-the-dark" tape is bright (has high luminance) and is long-lived. Before using it, please exposure it to most types of light for at least 5 to 30 minutes. Any type of light will charge the tape, but sunlight, halogen, xenon, & fluorescent lights work best. The tape can be recharged nearly an indefinite number of times. In its uncharged state the tape has a whitish/yellow color and when glowing the tape has a luminescent lime green color. Apply only to clean, dry, oil free surfaces. It is non-toxic, non-radioactive and has stable chemical properties.

    • Berry Plastics 444 Line Set Tape

      Berry Plastics 444 Line Set Tape is a UV resistant OPP film tape coated with a high performance acrylic adhesive. Use as an alternative to cloth tape for long term wrapping and protecting of foam insulation for pipes and outdoor HVAC line sets. 444 Line Set Tape has a special UV-grade backing which provides durability in outdoor applications. It is also hand-tearable for easy installation. No VOCs, no outgassing.

    • JVCC PTFE-5 Skived Teflon Tape (5 mil carrier)

      JVCC PTFE-5 Skived Teflon Tape is a 5 mil pure skived Teflon™ (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. High elongation of PTFE-5 permits tight wrapping and conforms to sharp bends/irregular surfaces.

    • JVCC PPT-25C Polyester Circuit Plating Tape

      JVCC PPT-25C Polyester Circuit Plating Tape is a 1 mil polyester film coated with 1.5 mils of pre-cured silicone adhesive. It is designed to be fully stable electrically and mechanically at operating temperatures up to 350°F. Adhesive is cured to provide maximum resistance to chemicals and leaves no residue during masking or holding applications. Excellent resistance to abrasives,acids, oils, aging, staining, and water immersion. Used as outer wrap on coils, capacitors, motors, and transformers and for masking in electroplating, anodizing, and PC boards. It can also be used to splice silicone-coated paper and films. Image does not show a full 72 yard roll.

    • JVCC GLW-24 Professional Glow in the Dark Tape (24 Hour)

      JVCC GLW-24 Professional Glow in the Dark Tape is a flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants. JVCC GLW-24 Professional Glow Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adjusted eye for up to 24 hours (to the night-adjusted eye it is visible, but it would not compare it brightness to say a standard flashlight). It also recharges. In its uncharged state the tape has a white/cream color and when glowing the tape has a luminescent lime green color. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. This ultra premium tape is offset, screen, flexo, and thermo transfer printable. Adhesive has a 24 hour dwell time.

    • 3M Scotch 616 Lithographers Tape

      3M 616 Lithographers Tape is a ruby red tinted UPVC film tape which is optically transparent and photographically opaque. Used for many lithographic striping applications in the graphic arts industry. Also for other opaquing, edging, masking and splicing applications in the graphic arts, printed circuit board and paper industries. Its ruby red UPVC film backing allows for accurate positioning and since the backing is low caliper it minimizes ghosting and provides for sharper definition. 3M 616 also resists affects of changing atmospheric conditions to allow repeated and extended "burn" times. Pin-hole free backing provides continuous opacity to light source to help minimize retouching and firm adhesive is long aging and resistant to softening to resist oozing during application and storage. Can also be qualified to meet MIL-T-40620A.

    • 3M Scotch 3105 Magic Tape in Handheld Dispenser

      3M 3105 Scotch Magic Tape is the original matte finish, invisible tape and comes on a handheld dispenser. It is sold in packs of 3 and is the preferred tape for offices, home offices, and schools. Write on it with pen, pencil or marker. The tape is frosty on the roll but invisible on paper. 3M Scotch Magic Tape is photo safe (non-yellowing) and made in the USA. Also great for craft projects.

    • 3M Scotch 226 Solvent Resistant Masking Tape

      3M Scotch 226 Solvent Resistant Masking Tape is a black polyethylene film reinforced with a saturated crepe paper used for outdoor masking applications as well as hot air leveling of printed circuit boards. Other uses include sealing, holding, bundling, reinforcing, identifying, tabbing, wrapping, paint masking, splicing and protecting. The polyethylene backing is resistant to many solvents, water solutions and emulsions and paint strippers of both the wax-base type and the mild caustic solution solvent-emulsion type. The tape offers several features and benefits such as its heavy thickness crepe paper backing is good for paint lines; its natural rubber adhesive offers good instant adhesion; and it is an easy tear, pressure sensitive tape which is conformable. It also offers clean removal properties on most opaque surfaces for up to three months of outdoor exposure and its saturated crepe paper layer reinforces the tape to control stretch. Industries the tape can be used in include transportation, aerospace, automotive, commercial vehicle, RV, bus, truck, ship yards, military, metal working, furniture, electronics, solar, trailer manufacturing and woodworking.

    • 3M Scotch 685 Riveters Tape

      3M Scotch 685 Riveters Tape is a 1.7 mil thick polyester transparent film coated along the edges of the tape only with green rubber adhesive (the center section is uncoated so there is no adhesive transfer to rivet heads). The tape has a tough non-stretch backing which allows it to easily hold rivets in place during riveting (it resists shattering or slivering). The transparent film acts as a "window" and provides easy visibility of rivets. Used in the aerospace, marine, specialty vehicle, transportation, automotive and metal fabrication industries. Can also be used for general holding applications where visibility of item(s) being held is required. The 3/4 inch width size has a 3/16 inch adhesive strip on each edge while the 1 inch width size has a 1/4 inch adhesive strip on each edge. The adhesive provides good immediate adhesion that helps resist stretching of the tape.

    • 3M Scotch 845 Book Tape

      3M 845 Book Tape is a tough crystal-clear transparent tape with a long-aging, synthetic adhesive that conforms readily to book contours and flexes with cover movements. Excellent for repairing, reinforcing, protecting and covering bound edges and surfaces. Use on books, magazines, pamphlets, record album jackets and more. The transparent polypropylene backing has excellent clarity which doesn't hide title information or printing and saves time and money by eliminating relabeling. It is tough, flexible, resists abrasion and cracking, and is conformable which reduces rebinding or replacement costs. Its synthetic adhesive is long aging and will not discolor or dry out so it won't deteriorate with time causing possible subsequent repair.

    • JVCC UHMW-PE-3 UHMW Polyethylene Film Tape (3 mil carrier)

      JVCC UHMW-PE-3 UHMW Polyethylene Film Tape is a 3 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on a white paper liner. Image does not show a full 36 yard roll.

    • JVCC V-DCA Vinyl Arrows On A Roll

      JVCC V-DCA Vinyl Arrows On A Roll are SPVC vinyl die cut arrows on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic. The arrows are dimensionally square so a 1 inch size arrow would be 1 inch wide by 1 inch long. For the 1 inch arrows there are 1,000 arrows on a roll and all other sizes have 500 arrows on a roll.

    • Sigma Classic Blown Stretch Film

      Sigma Classic Blown Stretch Film is a premium grade, blown hand film with unrivaled load-handling force and unparalleled puncture resistance. The stretch and toughness of blown film ensures enhanced protection for regular loads and extra protection for hard-to-hold "C" loads. Classic Blown offers toughness, strength and superior tear resistance. Sigma Stretch Film is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Applications include brick and block, warehouses, irregular loads, transportation industry, food distribution, bagged products, boxed products. Made in the U.S.A.

    • JVCC UHMW-PE-20 UHMW Polyethylene Film Tape (20 mil carrier)

      JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on a blue poly liner.

    • JVCC UHMW-PE-15 UHMW Polyethylene Film Tape (15 mil carrier)

      JVCC UHMW-PE-15 UHMW Polyethylene Film Tape is a 15 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on a white paper liner.

    • JVCC V-36P-EM Premium Embossed Stucco Masking Vinyl Tape

      JVCC V-36P-EM Premium Embossed Stucco Masking Vinyl Tape is an embossed silver vinyl tape which is used to mask windows and doors in stucco applications. Unlike traditional vinyl tapes it is hand-tearable.

    • Shurtape PE-555 Premium Polyethylene Film Tape (UV resistant)

      Shurtape PE-555 Premium Polyethylene Film Tape is a 9 mil UV resistant waterproof film tape used to temporarily mask window and door frames during stucco application and wood, metal, vinyl, and tile during painting. Multipurpose tape used for surface protection; color coding; and for splicing and seaming on pipe fitting covers. Shurtape PE-555 has excellent tear characteristics and well as adhesion.

    • JVCC CST-2H Clear Stationery Tape

      JVCC CST-2H Clear Stationery Tape is a 2 mil thick clear polypropylene office supply desk tape which has a water-based acrylic adhesive. The tape is hand-tearable.

    • JVCC IMT-2H Invisible Mending Tape

      JVCC IMT-2H Invisible Mending Tape is a 2 mil thick write-on translucent frosty-white invisible mending tape. It has a specially treated matte finish polypropylene film coated with a solvent-based acrylic adhesive. It is hand-tearable and non-glare. Cases are sub-packed (packs of 12 rolls for 1/2 inch width and 8 rolls for 3/4 inch width).

    • JVCC OPP-26CC Mid Grade Crystal Clear Packaging Tape

      JVCC OPP-26CC Mid Grade Crystal Clear Carton Sealing Tape is a 2.7 mil biaxially oriented polypropylene film tape coated with a solvent based acrylic adhesive. See-through "CRYSTAL CLEAR" imprinted on 3" core. Crystal clear tape is non-yellowing and UV resistant with a long shelf life. Used for carton sealing. May also be used for lamination and in cold temperature applications.

    • Scapa 571 Silicone Splicing Tape

      Scapa 571 Silicone Splicing Tape is a thin polyester film, single-coated on one side with a custom-formulated silicone pressure sensitive adhesive (opposite side of the film utilizes a standard non-silicone coating). The silicone adhesive provides high initial tack and ensures an excellent bond to silicone coated substrates. This translucent shear-resistant product is pink to enable prompt splice identification and has a soft, conformable adhesive that adheres well to irregular surfaces. It is used for splicing of silicone release papers, films, and other substrates; general-purpose bonding; high-temperature masking; and chemical masking. Scapa 571 features include: Excellent adhesion to silicone coated substrates. High initial tack which insures a good bond. Conforms to achieve good contact to surfaces being spliced. High shear resistance for a strong bond. Color of tape enables prompt splice identification. Is resistant to many chemicals. NOTE: Please note 571 has been discontinued by Scapa and limited inventory now remains. Please see JVCC PPT-36G for an alternative silicone splicing tape.

    • Sigma Extended Core Stretch Film

      Sigma Extended Core Stretch Film is a premium grade, cast co-extruded hand film wound on 1-1/4" cores with 5" application handles. Sigma Extended Core rolls are lightweight and easy to use in tight spaces. No dispensers are required. Loads get wrapped quicker with fewer trips around the pallet. Sigma Stretch Film is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Industry use includes distribution, moving and storage, transportation and boxed products. Made in the U.S.A.

    • Berry Plastics 628 Barricade Seam & Seal Construction Tape

      Berry Plastics 628 Barricade Seam & Seal Construction Tape is applied over the seams of installed housewrap to contribute towards a secondary line of defense against exterior moisture penetration of the wall envelope. It helps to maximize energy efficiency by sealing the gaps, cracks and crevices where air can easily penetrate the home and ultimately affect your heating and cooling costs. Berry Seam & Seal is recommended for: Door flanges and frames. Sealing holes and gaps in the exterior wall around faucets, dryer vents, electrical outlets and more. Exterior wall sheathing joints. Housewrap (Tyvek) seams and overlaps. Patching job site damage caused to fragile wall sheathings such as foam and fiberboard. Window flanges and frames. Berry Barricade Seam & Seal is a thin, strong, white polypropylene film coated with a cold weather acrylic adhesive system. It is specially formulated to have excellent performance characteristics at sub-freezing temperatures along with good quick stickability for ease in applying. Used to repair rips, punctures or tears in the sheathing or housewrap material. This tape can be applied to corners, joints, sill plates, etc., to improve air tightness. Berry Plastics Seam and Seal Construction Tape by itself, should not be used as a flashing material around windows and doors when it is not used in conjunction with an approved flashing material (one that meets or exceeds Fed. Spec. UU-B-790a Grade A), may compromise the wall system's ability to effectively resist exterior moisture penetration. NOTE: This product has been discontinued and no inventory now remains. Please see Shurtape HW-300 for an alternative.

    • ISC Helicopter-IG Surface Guard Tape (Indoor Grade)

      ISC Helicopter-IG Surface Guard Tape (Indoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge wing tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. The tape is clear/transparent and is supplied on a white paper release liner. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. NOTE: ISC has discontinued their indoor-grade version of this product - please see ISC Helicopter-OG and ISC Helicopter-OG-HD for alternatives.

    • JVCC 211 Polyethylene Film Tape

      JVCC 211 Polyethylene Film Tape is a polyethylene general purpose film tape for splicing, patching, sealing, tabbing and holding. Polyethylene Film Tape is also used for floor marking, convention center booth marking, packaging, and seaming polyethylene sheeting. NOTE: No inventory remains for JVCC 211. Please see Scapa 136 as an alternative.

    • JVCC LITHO-1 Lithographer's Tape

      JVCC LITHO-1 Lithographer's Tape is a ruby red E-PVC film tape with a solvent-based natural rubber adhesive. It is used for pre-press striping, splicing, edging and opaquing applications on film materials. Used in the graphic arts, printed circuit board and paper industries for blocking light from sensitive graphic art and printing materials. Lithographers Tape will not curl or damage negatives upon removal. Features of JVCC Lithographer's Tape include: Conformable. Absorbs UV and short wave light. Translucent. Easily repositionable. NOTE: This product was discontinued by the manufacturer and no inventory now remains.

    • JVCC LITHO-2 Lithographer's Tape

      JVCC LITHO-2 Lithographer's Tape is a red tinted UPVC film tape coated with a solvent based rubber/resin adhesive. It is used for edging, masking, pre-press striping and splicing applications on film materials. LITHO-2 is opaque to ultra violet and can be used in conjunction with orthochromatic films and plates. Also designed for striping up lithographic negative films prior to plate marking. Red color enables easy identification and the tape has better resistance to changing atmospheric conditions than cellulose based lithographic tapes. NOTE: This product is being discontinued by the manufacturer and no inventory now remains.

    • JVCC PF-9R Polyethylene Film Tape

      JVCC PF-9R Polyethylene Film Tape is low density polyethylene film tape coated on one side with a synthetic rubber-based adhesive. It remains tacky and bonds well to most surfaces over a wide range of temperatures (it has an excellent low temperature bond). JVCC PF-9R's tough polyethylene backing offers good abrasion and tear resistance. It is also highly conformable, waterproof and resistant to chemical deterioration. Applications for PF-9R include: polyethylene splicing; patching/repairing poly sheeting used in boating and RV industry; surface protection & electroplate masking; wire identification; and packing. Works well in most applications where a low thread count polyethylene coated cloth tape is being used. NOTE: This item is no longer carried. Please see Scapa 136 for currently stocked colored polyethylene film tape.

    • Polyken 801 Polyethylene Film Screenblock Tape

      Polyken 801 Screenblock Tape consists of a polyethylene (PE) film coated on one side with a rubber adhesive. It is used to block screens from moisture and chemicals during screen printing. Also used as a general purpose industrial bundling, patching, wrapping and repairing tape. Polyken 801 features include: conformable and flexible; has excellent durability & solvent resistance; has high tack for a secure bond; red for high visibility; and it's repositionable & offers clean removal (no residue).

    • Polyken 832 Polyethylene Film Tape (Overstock)

      Polyken 832 Polyethylene Film Tape is a polyethylene film tape with UV resistant acrylic adhesive. It is used on glass and Plexiglas for clean removal. It is also used in abatement processes and as a protective tape. Polyken 832 is UV resistance which allows for outdoor use. This is an overstock product and only limited inventory is available.

    • Scapa 1250 CrystalClear Transparent Film Tape

      Scapa 1250 CrystalClear™ Transparent Film Tape is an ultra clear polypropylene film with a non-yellowing acrylic adhesive. It is used for overlaminating film for labels and prints and for splicing. Scapa 1250 Film Tape is excellent for use as gel repair and book repair tape. Features include: low unwind force for easy handling UV resistant non-yellowing adhesive polypropylene carrier is stable and long lasting non-staining tape in the textile industry NOTE: Scapa 1250 is no longer stocked. Please see JVCC BOOK-20CC or Permacel J-LAR for a similar tape.

    • Scapa 1919 Desk Tape

      Scapa 1919 Desk Tape is a translucent cellulose frosted matte acetate film, single coated with an acrylic pressure sensitive adhesive. Used for splicing, office applications, and repairing and joining documents and drawings. Product benefits include: invisible once applied, can be written on, and non-yellowing adhesive. Compare with 3M Scotch "Magic Tape". On a 1 inch inner diameter core.

    • Scapa 627 House Wrap Splicing / Sheathing Tape

      Scapa 627 House Wrap Splicing / Sheathing Tape is a polyester film, single coated with an aggressive acrylic adhesive. Used for splicing of non-silicone surfaces and seam sealing (e.g. one common use is to seal seams of Tyvek to help provide a vapor barrier against air coming in through seams of house wrap). Comes with serrated/pinked edges for easy hand tearing. Its aggressive, tacky adhesive aides in splicing to various non-silicone surfaces and its printable PET carrier adds dimensional stability and strength. It has excellent balance of tack, peel and tensile strength, maintains adhesion at low temperatures, and exhibits excellent aging and weathering properties. NOTE: Scapa 627 is no longer being carried. Please see Berry Plastics's 628 Barricade Seam & Seal Construction Tape as an alternative.

    • Scapa 702 Double Coated Silicone Tape

      Scapa 702 Double Coated Silicone Tape is a polyester film coated on both sides with a silicone pressure sensitive adhesive. Used for splicing of silicone coated papers and films. Bonds silicone substrates and many other difficult to bond surfaces. Scapa 702 provides excellent quick-stick and strong holding power. Bonds silicone foams and gaskets for automotive and industrial applications, high or low temperature gasket sealing, can be die-cut for precision parts. Wound on a specially treated polyester film liner which allows for easy unwind. Bonds over a wide operating temperature range and resistant to many chemicals. NOTE: 702 has been discontinued by Scapa and no inventory now remains.

Shopping Cart
Find The Best Pricing on Adhesive Tape...
The Easiest Shopping for All Brands of Tape.
BBB accredited business.
McAfee Secure Tested Site
For all of your Adhesive Tape needsShop by CategoryAdvanced Tape FinderPrintable CatalogSearch for adhesive tapeKeyword SearchFindTape.com

Recently Viewed Products


 

Sign Up For Our Newsletter!

Sign up today to be notified of upcoming deals and exclusive offers!


Keep up to date on our latest news


 
 
bizrate Customer Certified Site - FindTape.com Reviews at Bizrate
FindTape.com is an Upfront Merchant on TheFind. Click for info.
Copyright ©2003-2014 FindTape.com LLC. All Rights Reserved. SSL Seal