- JVCC Low-Density PVC Foam Tape [Single-Sided, Closed Cell] (SCF-01)
JVCC SCF-01 Single-Sided Foam Tape is a low density, closed-cell PVC foam tape in thicknesses of 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, or 3/4 inches. It is an economical, general-purpose foam tape coated on one side with a high-performance acrylic adhesive. The adhesive on this single-sided foam product is on the exposed side of the tape when you unwind it from the roll; the release liner is pulled away from the non-adhesive side of the tape. A good combination of flexibility and conformability with strength & wear resistance. Also has excellent weatherability and chemical resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations. JVCC SCF-01 Foam Tape is used extensively in the automotive, HVAC and construction industries to provide air & weather-tight seals; for gasketing, cushioning, vibration control in speakers, vehicles, electronic components and door frames. Also for filling and sealing gaps around windows, doors, and car/SUV tops for better insulation. It is a clean, waste-free substitute for liquid sealants. Please make note that this a closed-cell foam product (to compress it 25% it requires 3.0 psi for the 1/16 inch thick up to 4.0 psi for the 3/4 inch thick); it is not soft like an open-cell foam product would be. It also complies with European RoHS directive 2002/95/BC. NOTE: SCF-01 tape can be special ordered in thicknesses ranging from 1/16" to 3/4" and in widths ranging from 3/16" to 54". It can also be ordered in gray, instead of black, if ordering by the case. Please use the contact us page to inquire whether a particular thickness/width combination not shown below is available and what the minimum order requirement would be for that size.
- FindTape Polyester Felt Tape [1mm thick] (FELT-06)
FindTape FELT-06 Polyester Felt Tape, 1 millimeter thick, is synthetic needle punched felt made from polyester fibers. On one side, it is felt; on the other side, adhesive. This tape is most frequently used to join and temporarily repair curtains, fabric and cloth drapes used in backdrops and for other general use vibration dampening. There are many other kinds of uses as well. It's available in white, black or light gray, and in various widths from .5 to 12 inches. Choose from 15, 30 or 75-foot rolls. Made in the USA. Product Applications Join or repair fabric, curtains and cloth drapes Filtration uses Gaskets, wipers and padding in various industries Hides seams being photographed Apply clean, dark edge to flats, platforms and portals Create matte borders or edges Line jewelry cases and display cases Pad furniture legs to prevent scratches on wood floors Anti-rattle tape for automotive use Eliminate plastic squeaks in car Replace foam in old printer Dampen sound on cabinets Cover sharp edges on piano keyboard cover Prevent scratches on desktop shelves Eliminate squeaks between wood on bed Protect walls from nearby furniture Keeps rocking chairs from sliding on carpet Protect furniture from Roomba® (robot vacuum) Create homemade Halloween costumes Frame a projector screen Application Tips Most adhesive felt rolls will have a 2-inch to 4-inch leader of double-sided film tape applied to the release liner at the start of the roll. We recommend that you cut a small piece of felt off at the beginning of the roll with scissors to start, or peel the double-sided film tape off release liner to begin applying the felt. Try not to pull double-sided film tape off the felt backing. It is sometimes easier to peel the corner of the felt away from release liner (instead of release liner away from felt). Otherwise, there's a danger of splitting the release liner.
- Shurtape Performance Grade Cloth Duct Tape (PC-618)
Shurtape PC-618 Industrial Grade Duct Tape is a performance grade duct tape which is available in a wide variety of colors. It is used to seal cartons, repair seats, bundle wires, color code, hold, secure, package, mask, splice, repair, and seal hatch covers and cargo doors in the HVAC, industrial, commercial, utilities, shipping, trucking and automotive industries. Shurtape PC 618 Duct Tape can also be used as a condensation barrier in appliance assemblies and for HVAC metal and flex duct sealing. It has a waterproof backing; has excellent conformability and tack; is easy to unwind and tear; and has excellent holding power. UL 723 listed. PC 618 SIL refers to this tape in a silver color and PC 618 CLR refers to the other 11 stock colors which include: black, brown, red, yellow, olive drab, white, orange, green, blue, burgundy and beige (tan). Also please note Shurtape's version of olive drab is very dark as displayed in the product photo. PC 618 silver comes with Shurtape's Polyblended CO-EX technology with is a co-extrusion process which melds polyethylene, cloth and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate).
- JVCC Patch & Repair Tape for Leather and Vinyl surfaces [Gaffers Tape] (REPAIR-1)
JVCC REPAIR-1 is a strong and reliable leather and vinyl repair tape that is most commonly used to repair school bus seats. However, this high-quality tape has many uses, so if you're looking for a vinyl repair tape for motorcycle seat fabric, this repair tape is a great choice. It's constructed from vinyl-coated cloth, so you can easily tear it by hand without the need of a cutting tool, but you'll get the cleanest cut if you use a razor blade. JVCC REPAIR-1 leather and vinyl repair tape (gaffers tape) is available in various colors. Colored vinyl repair tape is especially useful when you need to match a certain shade. All the colors have a matte finish. If you need a shinier tape, see JVCC REPAIR-2HD, which is made from polyethylene-coated cloth duct tape. This tape is primarily used indoors but can be used outdoors over short time periods (the tape does not offer any type of UV-protection). Product Applications School bus seat repair Repair and patch vinyl sofas and seats Repair and patch leather seats and sofas Cover concealment Arts and crafts projects Color-coding Repair car seats Wrap tennis racket handles and bike handles Repair holes in lederhosen Fix holes in office chairs Patch boat seats Cover a fraying convertible top Application Tips Always use a razor to cut a piece off. Tearing by hand leaves a rougher edge which allows the edges to be more vulnerable to rolling up. Even scissors have a hard time cutting through it as cleanly as a razor blade since it is heavy-duty vinyl-coated cloth coated with an aggressive adhesive. A good way to prolong the amount of time it will stay down before its having to be replaced is to apply a small amount of wax on top of the edges, which helps reduce friction. Remember: gaffers tape is designed to not leave sticky adhesive residue behind like a duct tape would; however, it may still pull up loose debris, finish, etc. from a substrate it is applied to depending on many conditions such as length of time applied, chemicals used to clean the substrate and the composition of the substrate itself (as any adhesive tape would). * Please Read Many seating surfaces have accumulated oils, detergents, polishes, and miscellaneous other surfactants that will prevent pressure-sensitive adhesive tapes from forming a bond. Please try testing the surface with any available comparable adhesive tape (masking, gaffers, etc.) prior to purchasing this product to see if this could possibly work for you. If that other tape does not adhere you can try cleaning the substrate first with a damp cloth and then allowing to dry completely. If it still does not stick, then you might need one of the liquid seat repair products available on the market instead (these products would also be less noticeable than a tape repair).
- JVCC Nomex Felt Tape [1/8" thick felt] (FELT-N1)
JVCC FELT-N1 Nomex Felt Tape is made from 100% meta-aramid synthetic fibers which do not ignite, melt or drip and retain their mechanical properties at elevated temperatures. Even though meta-aramid fibers have higher tensile strength and lower thermal conductivity than other fibers, they are soft to handle and processes similar to conventional fibers. JVCC FELT-N1 Nomex Felt Tape is 1/8 inches thick and provides proven performance as a lightweight and durable solution for a range of applications and industries where heat and flame-resistance are vital. In addition, JVCC FELT-N1 Nomex tape can be used in high-temperature applications for sealing or protection against scratches and dents. Product Features High strength Good resistance to abrasion Good resistance to organic solvents Non-conductive No melting point Low flammability Good fabric integrity at elevated temperatures Product Applications Flame-resistant clothing Military Personal protective equipment Grills and BBQ equipment Aerospace High-temperature gaskets Scratch and dent protection
- tesa PET Cloth Wire Harness Tape [Flame Retardant] (51036)
tesa 51036 PET Cloth Wire Harness Tape is a flag-resistant PET cloth wire harness tape with a solvent-free, advanced acrylic adhesive. With the new adhesive formula, tesa® 51036 is highly resistant to flagging and ensures secure closure. This anti-abrasion tape can withstand high temperatures and demanding environmental conditions. The acrylic adhesive of this door/mirror harness tape is compatible with halogen-free cable jacketing materials (PE/PP) and guarantees enhanced durability. Uses & Applications High abrasion resistance High temperature resistance 150°C/3000h High flag-resistant Excellent cable compatibility Resistant to aging Can withstand environmental influences Can be used for manual and automatic application Flame-retardant Tear-resistant Constant unwind force Flexible and smooth Country of Origin: Germany.
- 3M Leather and Vinyl Repair Kit (08579)
3M Leather and Vinyl Repair Kit patches tear burns and cuts in automotive upholstery. Using our repair kit improves the appearance of damaged leather and vinyl and potentially stops the damage from getting worse. However, because a tear or cut can spread if left unchecked, it is advisable to complete the repair as soon as possible. Keeping surfaces clean and resistant to mildew is one of its benefits. Detailed instructions are included. Features & Benefits Kit repairs cuts, tears and burns in automotive leather and vinyl Color matching guide helps customize the color Textured grain papers help match coarse to smooth pattern An inexpensive option for repairing minor damage Complete kit includes supplies, tools and directions
- JVCC Medium-Density PVC Foam Tape [Single-Sided, Closed Cell] (SCF-02)
JVCC SCF-02 Single-Sided Foam Tape combines medium-density closed-cell PVC foam with high performance acrylic adhesive. The higher density foam of this industrial grade tape adds durability for your toughest applications. JVCC SCF-02 tape is flexible and conformable, yet extremely strong and resistant to wear. It’s also weather and chemical resistant. This single-coated PVC foam tape complies with European RoHS directive 2002/95/BC, and it’s extensively used in HVAC, construction and automotive industries. We have this foam tape available in various thicknesses 1/16 inch, 1/8 inch, 3/16 inch, and 1/4 inch. This product is made in the U.S. JVCC's SCF-02 has the release liner applied to the non-adhesive side of the tape. They do this so the adhesive side of the tape will more easily unwind from the roll when you go to use it since it will not adhere well to the silicone-coated release liner it sits on top of. The adhesive is coated on the exposed side of the tape (the tape visible once you unwind it from the roll) instead of the liner side (the tape exposed once you remove the liner). Product Applications Air and weather tight seals Gasketing Cushioning Sound Deadening Vibration control in speakers, vehicles, electronic components and door frames Use on CNC router bed Fill and seal gaps around doors, windows and car or SUV tops for better insulation Clean, waste-free substitute for liquid sealants NOTE: SCF-02 tape can be special ordered in thicknesses ranging from 1/16" to 1/4" and in widths ranging from 3/16" to 54". Please use the contact us page to inquire whether a particular thickness/width combination not shown below is available and what the minimum order requirement would be for that size.
- Nashua FoilMastic Butyl Rubber Tape (360-17)
Nashua 360-17 FoilMastic Butyl Rubber Tape is a printed, 2 mil dead-soft aluminum foil backing with a 15 mil butyl rubber mastic adhesive. It is a waterproofing repair tape used for indoor or outdoor sealing of low, medium & high-pressure HVAC duct systems (includes: metal duct, fiberglass duct and flexible duct systems). It seals cracks and seams in gutters, roof alleys, eaves, hips and ridges and seals around chimneys and vent stacks. You can use Nashua 360-17 to repair gouges, rips, tears in metal panels of trailers, shipping containers and metal buildings. Also used to seal leaks in vans, cars, and trucks and for mobile home repair. Use duct mastic to mend poorly sealed connections, improve indoor air quality (since fewer pollutants circulating), lower utility bills, and burn fewer fossil fuels. SMACNA A, B, and C Seal Classes. UL 723 classified. Low VOC content and can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED®. Please note that Nashua 360-17 and Polyken 360-17 are the same product manufactured by Berry Plastics. Therefore the tape roll core may be branded with Nashua or Polyken, depending on current inventory. Features & Benefits Permanent sealant. Provides instant water tight bond. Acceptable for use on galvanized materials. Heavy duty all weather foil coated butyl mastic. Excellent adhesion to all surfaces. Extremely conformable. Non-staining adhesive. Paintable 2 mil foil backing (use in place of caulk). Excellent resistance to cold, heat, water, and sunlight. Printed for easy identification. Release liner provides ease of installation.
- JVCC Electrical Grade Glass Cloth Tape [Silicone Adhesive] (GC-SIL-7)
JVCC GC-SIL-7 Electrical Grade Glass Cloth Tape is coated with silicone adhesive and is conformable, printable, and chemical & solvent resistant. Designed for use in strategic area masking of areas in thermal and plasma spray applications. Used for insulation of electrical apparatus, coil wrap, and for sealing and bundling of non-electrical applications where flame retardancy or high heat resistance is required (e.g. welding). UL approval insulation class: 180°C Class H.
- Shurtape High Temperature Masking Tape (CP-500) [Discontinued]
Shurtape CP-500 High Temperature Masking Tape is ideal for today's high tech transportation industry and for wet sanding applications. This tape works best in metal preparation, high-temperature painting applications and coating. Strips cleanly after baking or extended applications (up to 300°F). Used for both the automotive aftermarket and other industrial uses. Typical Applications Metal preparation Painting and coating High-tech transportation industry (auto, coaches, buses and marine) Benefits and Features No adhesive residue Quick stick Clean, flat edges Strong adhesion to metals, rubber, plastics and fiberglass Strips cleanly with no residue or paint flake after baking and extended application periods Solvent resistant Excellent adhesion to tape backing and masking papers Smooth unwind
- Scotch Solvent Resistant Masking Tape (2040)
Scotch 2040 Solvent Resistant Masking Tape is a tough, solvent resistant masking tape that provides excellent adhesion while minimizing the need for rework through resisting bleed through and flaking. The powerful adhesive prevents lifting, makes application more efficient, and holds exceptionally well, while not damaging surfaces/coatings after removal. Intended for use with most solvent-based lacquer coatings but also can be used in various masking applications. Do not use on easily damaged surfaces such as wallpaper, wallboard, ceiling tile, uncured coatings, or other delicate surfaces. Not for extended outdoor use. A brand of 3M.
- Scotch High Performance Green Masking Tape (401+)
Scotch 401+ High Performance Green Masking Tape is the preferred choice among industrial painters who demand results. Built on a foundation of innovation, 401+ tape is designed to deliver super-sharp paint lines in applications where surface temperatures can reach up to 250° Fahrenheit. When you consider 401+ can also be used to accomplish everything 3M Industrial Masking Tapes 101+, 201+ and 301+ can do, it’s quite possibly the most versatile tape in the line. It’s one mean, green, masking machine, designed to deliver the consistently superior results you’ve come to expect from 3M. Ideal for critical paint masking applications in automotive, specialty vehicle and industrial markets where strong holding and high temp performance is required, it is frequently used in two-tone color applications on trucks, buses, trailers, trains, fire trucks, ambulances, and airplanes. 3M Scotch 401+ High Performance green masking tape is a solvent-free adhesive that offers 36 ounces per inch of peel adhesion compared to 3M's blue painter’s tape, which only offers 23 ounces per inch. This means it maintains an exceptionally strong hold on metal, rubber, glass, and plastic, yet it is still designed to remove cleanly in one piece, without leaving any residue behind. The conformability of 401+ makes this tape especially useful when placing it around corners, over contours and irregular surfaces. Features & Benefits Superior adhesion to metal, rubber, glass, and plastic, while removing cleanly in one piece with no adhesive residue. Highly conformable to many surfaces. Resists paint bleed-through and creates super-sharp paint lines. Green backing improves visibility and accuracy during paint masking. Ideal for high-performance industrial painting, including two-tone color applications on trucks, buses, trailers, trains, fire trucks, ambulances, and airplanes. Withstands surface temperatures up to 250°F (121°C) for 30 minutes.
- Intertape High Temperature Masking Tape (PG21)
Intertape PG21 High Temperature Masking Tape is an extremely versatile masking tape which is resistant to strong solvents and paints and is easily removed in warm or cold environments. It is designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes (time and temperature determined by surface). IPG PG21 performs well in wet strip applications and its easy handling, smooth paper crepe backing exhibits high strength, excellent conformability to irregular surfaces and exceptional cornering. It provides resistance to paint flaking as well as a clean, well-defined paint line. Applications uses include automotive, truck, bus, and marine paint masking. Recommended hot to warm removal, but can be removed cold.
- Nitto High Temperature Masking Tape (P-703)
Nitto P-703 High Temperature Masking Tape, a high-quality crepe paper masking tape, is designed for paint masking applications in high temperatures. Nitto P-703 (previously known as Permacel P-703) is commonly used for general purpose masking in addition to splicing and holding. It is especially useful with hard-to-hold surfaces like chemically treated fabric. This Nitto tape is resistant to alkyd and acrylic paint solvents, with fair resistance to highly active polyurethane paint solvents and ketones. Nitto P-703 can withstand temperatures up to 300 degrees Fahrenheit (149 degrees Celsius) for up to 1.5 hours without mass transfer or slivering when removed. It supports Kraft masking paint drapes at baking temperature. Features & Benefits Good high baking temperature properties. Coated with natural rubber adhesive for high temperature paint masking. Resistant to solvents and stains. No odor. Ages well; long shelf life. Excellent tear strength. Quick-stick and high-hold characteristics. Good elongation with optimal conformability around corners and on uneven surfaces. Smooth and thin; prevents paint build-up along edges. Doesn't highlight on appliance finishes. Product Applications Paint masking in aerospace, automotive and housing markets. General purpose masking to 300 degrees Fahrenheit (149 degrees Celsius). Can be used on rough substrates like cinder block walls in schools.
- JVCC UHMW Polyethylene Film Tape [10 mil carrier] (UHMW-PE-10)
JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on either a blue film or white paper release liner.
- Gorilla Waterproof Patch & Seal Tape
Gorilla Waterproof Patch & Seal Tape instantly seals out water, air, and moisture. With an extra thick adhesive layer and UV resistant backing this tape conforms to form a permanent bond indoors and out. At 4 inch wide use it to patch holes, cracks, gaps and tears, even underwater. Excellent for Home, Auto, Marine, Camping, RVs, Outdoors, and more. Performance will be dependent on surfaces & conditions. Surfaces must be clean, smooth and non-porous. Water must be pressed out from underneath tape. Not for use on seams, applications under pressure, or automotive applications under the hood. May not adhere to silicone or water-repellent materials. Do not use to hang. Permanent: may damage surface if removed. Features and Benefits Waterproof Works underwater Indoor/outdoor Instantly seals out water, air, & moisture Permanent bond 2x more tape compared to 5 foot flexible tapes
- JVCC UHMW Polyethylene Film Tape [20 mil carrier] (UHMW-PE-20)
JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; slide tape replacement on top of track saws, dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on either a blue film or white paper release liner.
- Oralite Gate Arm Microprismatic Retroreflective Conspicuity Tape
Oralite Gate Arm Microprismatic Retroreflective Conspicuity Tape is a Type V microprismatic retroreflective tape which is designed for rugged, outdoor use in rail gate arm and other barrier arm gate conspicuity applications. Oralite is the Oracal Group's new brand name for Reflexite. It meets the requirements of the US DOT FHWA Manual on Uniform Traffic Control Devices (MUTCD) - 2009 Edition per Section 8C.04 Paragraph 05 stating "Gate arms shall be fully retroreflectorized on both sides and shall have vertical stripes alternatively red and white at 16-inch intervals measured horizontally". The tape is composed of cube corner (microprism) retroreflective elements integrally bonded to a thin, flexible, smooth-surfaced, tough and weather-resistant UV stabilized polyester film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the rims facets. Maintains reflectivity after impact. 10-year limited warranty from Oralite. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 700 120 30° 400 72 0.5° -4° 160 28 30° 75 13
- Indasa High Temperature Automotive Masking Tape
Indasa MTY High Temperature Automotive Masking Tape is a deep colored saturated crepe paper premium masking tape coated with a cross-linked natural rubber resin adhesive. It offers excellent high tack as well as brilliant water and solvent resistant features. It is industrial strength and sticks instantly to most surfaces including metal, rubber, glass, and plastic. The flexibility of tape allows to shape on contours. Delivers high-quality sharp paint lines. Designed for both indoor and outdoor use and offers up to 10 to 15 days of clean removal (UV resistant). Engineered for the racing and marine fabrication industry and is designed to be residue-free even under extreme conditions. Its waterproof backing fits baking cycles up to 230°F for 60 minutes. Indasa MTY is also suitable for wet sanding processes and other high demanding duties. Not recommended for delicate surfaces.
- 3M Foil Tape [UL 181 A & B listed / Linered] (3340)
3M 3340 Foil Tape is a high temperature, high strength aluminum foil tape coated with a cold weather acrylic pressure sensitive adhesive. This tape is constructed using a 2.0 mil aluminum foil backing with a strong, pressure sensitive acrylic adhesive for long-term adhesion, along with an easy releasing poly coated kraft paper liner to protect the adhesive and keep the tape ready for use. The aggressive acrylic adhesive performs in both cold and hot temperature conditions. An essential requirement for sealing ducts and other surfaces for heating, ventilation and air conditioning systems is foil tape that can stand up to hot and cold temperatures. The foil backing of 3M 3340 serves as an excellent barrier against moisture, dust, and many chemicals. The very low moisture vapor transmission rate makes the tape a good sealant and the acrylic adhesive supplies superior temperature and UV resistance to give you a strong, lasting, and reliable bond. 3M Foil Tape is used in industries such as transportation, metalworking, construction, automotive, military and government, general industrial, electronics, aerospace, and more. Product Applications High performance duct closures High strength aluminum foil backing is ideal for rigid duct board and flexible duct Vapor seal on reinforced fiberglass duct board Excellent for hot and humid conditions Excellent performance and durability in any weather conditions Cold weather adhesive No special tools or process required for application Product Features 2.0 mil aluminum foil backing Listed for both UL181A-P and UL181B-FX Replaces mechanical fasteners for rigid duct board Thermally conductive backing helps heating and cooling efficiency Permanent acrylic adhesive
- 3M Automotive Refinish Masking Tape (388N)
3M Automotive Refinish Masking Tape uses a proprietary rubber-based adhesive formula combined with a sturdy crepe paper backing to provide an exceptionally effective masking tape designed with the automotive collision repair industry in mind. Resistant to solvents, moisture, and exposure to the elements, this tough tape is well suited for many environments and applications. The flexibility of the material enables it to cling to contours and corners with ease. Provides high-quality paint lines without leaving any buildup behind, every time. Available in multiple sizes to suit your project's needs.
- JVCC Ultra High Bond Double-Sided Tape [Clear Foamed Acrylic - 10 mil] (DC-UHB10FA-C)
JVCC DC-UHB10FA-C Ultra High Bond Double-Sided Tape is constructed of a clear foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications. The double-sided (AKA double-coated) tape is ideal for structural bonding applications to mount/fix car side molding and emblems. Used as a mounting tape in the illuminated sign industry, for fabricating road signs, joining of metals, and plastic trims in furniture construction and architectural applications. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. The tape is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance. Tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours.
- 3M Super Strength Automotive Molding Tape [46 mil] (036)
3M Super Strength Automotive Molding Tape is a .045-inch (45 mil) thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides. 3M Super Strength Molding Tape creates a strong bond with both painted and unpainted automotive surfaces. With its foam core, it allows the tape to elongate and relax when put under load, which minimizes the stress along where the adhesive bonds to the vehicle surface. Typical applications include body side moldings, emblems, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components. Tape comes on a plain (unprinted) red release liner. Features & Benefits Superior adhesion build rate to automotive substrates. More conformable core gives excellent wet-out (tape contact). Black, high-strength core maintains a thin, consistent bond line. Easy liner release.
- 3M VHB Tape [45 mil / heavy duty mounting] (5952)
3M 5952 Heavy Duty Mounting VHB Tape is a double-coated black VHB adhesive tape that has an acrylic foam core. This double-coated tape has a modified acrylic adhesive on both sides of this 3M foam tape, which is highly conformable while providing exceptional adhesion to a wide range of surfaces and substrates. This includes most powder coated paints. 3M VHB mounting tape comes on a red film release liner for high visibility. 3M 5952 double-sided tape (heavy duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds and other permanent fasteners. Product Applications Secure objects on trucks or travel trailers Mount a GPS, cellphone or other equipment in a vehicle Attach motorcycle accessories Install a dashboard camera Mount accessories onto your vehicle that can't be screwed down Lock solar panels to the roof of a vehicle Semi-permanently affix metal parts Attach a metal sign to a glass door Secure trim to a truck Hold parts together during assembly About the Acrylic Foam These VHB tapes are constructed with special viscoelastic acrylic foam, which gives the foam the ability to absorb energy, in addition to stress relaxing properties. The acrylic composition gives the tape superior durability and resistance to moisture and solvents. See these 3M videos that demonstrate the advanced properties of their VHB tape. Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape.
- tesa Conformable Uncoated Cloth Tape (4541)
tesa 4541 Conformable Uncoated Cloth Tape is an uncoated cloth tape that is known to be highly flexible and conformable, making it perfect for many applications. Tesa 4541 is a pliable and conformable tape suitable for a wide range of applications, including bundling bars, rods, and cables, fixing plastic clips to cable tubes, and suitable for therapeutic bandages on horses (e.g., hoof tape). Further, Tesa 4541 Conformable Uncoated Cloth Tape provides good adhesion even on rough and oily surfaces, is easy to write on, makes an excellent marking tape, and adapts to uneven surfaces without creasing. Features & Benefits Flexible and smooth Suitable for marking, easy to write on Suitable for therapeutic bandages on horses (e.g., hoof tape) It adheres well to rough, oily surfaces as well Tensile strength is very high You can adjust surfaces without creasing Based on FMVSS 302, classify as SE / NBR (self-extinguishing / no burn rate)
- JVCC Ultra High Bond Double-Sided Tape [Grey Foamed Acrylic - 43 mil] (DC-UHB45FA-G)
JVCC DC-UHB45FA-G Ultra High Bond Double-Sided Tape is constructed of a grey foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications. Ideal for structural bonding applications in the transportation industry. Used in the automotive aftercare market and in body shops for crash repair as well as mounting/fixing car side molding and emblems. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. The tape is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance. This double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours.
- JVCC UHMW Polyethylene Film Tape [5 mil carrier] (UHMW-PE-5)
JVCC UHMW-PE-5 UHMW Polyethylene Film Tape is a 5 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on either a white paper or a blue film release liner (changes depending on the lot we received in last).
- 3M Sound Deadening Pads (08840)
3M 08840 Sound Deadening Pads make riding in a vehicle more pleasant by suppressing road noise, sound system vibrations, rattles, and other distracting noises. Deadening pads are flexible, self-adhesive sheeting that can easily be customized and applied to floor pans, engine compartments, hoods, deck lids, inside doors, and body panels. Features & Benefits It can be used on trunks, door panels, hoods, floor pans, and more No special tools are needed to install the self-adhesive material An all-purpose sound deadening mat reduces road noise, vibrations, and rattles Easily fits around various stamped shapes with the easy-to-cut material
- 3M Double-Sided Silicone Tape (96042)
The most popular use for 3M 96042 Double-Sided Silicone Tape is to splice silicone-coated papers and films. It is also widely used in high-temperature applications. This polyester (PET) film is coated on both sides (AKA double-coated) with a silicone pressure-sensitive adhesive. In addition to top performance with most silicones, 3M 96042 double-sided silicone tape provides high bond strength to hard-to-bond substrates like varnished leathers and many low surface energy plastics. This high-performance silicone tape is wound on a specially treated polyester film liner for easy unwinding. Features & Benefits Good quick stick initially and adhesion build over time Superior adhesion to silicone foams and silicone rubbers Exceptional resistance to solvents Superior high temperature performance Product Applications General purpose silicone bonding Bonds silicone foams and gaskets for industrial and automotive applications Splice silicone coated films and papers Difficult-to-bond substrates such as low surface energy plastic and varnished leather Vibration damping High temperature uses Single liner applications Purchase your adhesive tape products at FindTape for the best selection and prices. Our 3M 96042 price is competitive and affordable.
- 3M Gripping Material Tape
3M GM Gripping Material Tape consists of a high-friction surface with a thin flexible backing and acrylic pressure-sensitive adhesive with liner. The tape can increase traction, reduce slip, and improve grip even in wet, and oily conditions. When used alone on a single surface, 3M gripping material provides a strong secure grip. When mated in a two-part system, for example on a glove and a handlebar grip, strength is maximized. Designed for peel and stick applications. As firmly as 3M gripping material holds, it releases just as easily. Performs across a broad range of temperatures ranges both indoors and outdoors. Markets served include sports, leisure, medical, construction, marine, general industrial, military and government. Based on 3M’s proprietary micro-replicated technology to add thousands of micro gripping fingers on one side of a flexible backing to enhance control and improve gripping performance. will increase holding power while using less force so helps decrease fatigue. 3M GM400 black and GM731 clear are both firm (very high tactility), adhesive backed gripping material which offers abrasion and puncture resistance. They offer very high durability, very high chemical resistance, and very high friction when mated (lower when unmated). 3M GM631 grey is a very soft (very low tactility) gripping material which offers some abrasion and puncture resistance. It has lower durability, lower chemical resistance, but offers the highest level of friction when unmated in dry or wet conditions. GM400 black offers very high UV resistance, GM731 clear above average UV resistance, and GM631 grey average UV resistance. Uses & Applications Truck, forklift, and auto steering wheels. Snow ski poles. Hula hoops. Handrails and wheelchair handles. Smart phone cases. Water sport paddle handles. Bicycle handles. Industrial tool handles and levers. Fishing rods. Power and garden tool handles. Weight lifting equipment handles. Snow blower grips. Features & Benefits Offers ultra high durability and high coefficient of friction properties when mated and low coefficient of friction when non-mated. Thousands of gripping fingers offer the ability to grip lighter and hold tighter, even in wet and oily conditions. Pressure sensitive acrylic adhesive bonds to a wide variety of surfaces, including hard-to-bond-to surfaces such as low surface energy plastics, powder coated paints, and lightly oiled metals. Slip resistant, vibration dampening, and easy release properties.
- JVCC UHMW Polyethylene Film Tape [3 mil carrier] (UHMW-PE-3)
JVCC UHMW-PE-3 UHMW Polyethylene Film Tape is a 3 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction make this a versatile engineering material for many severe service applications. Materials slide freely over the tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on either a white paper or a blue film release liner.
- Sharpline Old Glory Distressed American Flag Decal
Customize your ride with the Sharpline Old Glory Distressed American Flag Decal. This premium film decal is perfect for your car or truck. Made from exterior performance 3 mil. self-adhesive film, this decal features the image of a distressed or weathered American flag printed in silver metallic. Show off your patriotism with this high-quality automotive decal. Features & Benefits Size: 15 inch x 26 inch. Color: Silver Metallic printed on clear film. Designed for exterior use.
- Pres-On Gasketing Foam Tape [Single-Sided, Open Cell] (P8500 Series)
Pres-On P-8500 Series Gasketing Open-Cell Foam Tape is a highly flexible fine cell polyester urethane foam tape designed for automotive gasketing applications. The rubber-based, pressure-sensitive adhesive demonstrates a powerful level of adhesion on a variety of surfaces. Excellent for sealing out dirt and moisture, as well as dampening sound and vibration. Additionally, this tape resists aging, weather conditions, and environmental damage, making it perfect for repairs or installations that need to last for years to come. Application Instructions Thoroughly clean contact surface before use Once P8500 has been applied, it cannot be removed and reused. Ensure alignment is correct and that contact is being made with all desired surfaces. If misaligned, remove and apply a new unit Test product beforehand for system compatibility as individual application conditions can impact results
- JVCC Ultra High Bond Double-Sided Tape [Solid Acrylic - 25 mil] (DC-UHB25)
JVCC DC-UHB25 Ultra High Bond Double-Sided Tape is a 25 mil thick structural grade tape comprised of an integral core of solid acrylic polymer, coated on both sides (AKA double-coated) with a uniform high-tack acrylic adhesive, and carried on a white polyethylene release liner. It provides a superior, permanent bond between a wide variety of substrates, including glass, some plastics, composites, sealed wood, metals, and painted metals. Withstands a wide range of weathering and temperature conditions without losing adhesion. Solid acrylic core gives tape superior strength; it can be easily applied and cleanly cut, yet is flexible, moldable, compressible, and conformable to intricate shapes. The tape will bond to most surfaces, but a thorough evaluation is recommended when bonding low energy surface material such as PVC, ABS, PE, PP. Not recommended for bonding Teflon, Tedlar, silicone or EPDM. JVCC DC-UHB25 is used primarily in the transportation industry, automotive, truck, trailer and bus, signs, graphic art assemblies, furniture/appliance manufacturing, and RV skin to the frame assembly. Rugged metal to metal bonds to replace welding, rivets, bolts, screw, and cementing. It will maintain adhesion at sub-zero temperatures and is non-staining and will not harden or become brittle with age. It isolates and dampens vibration and shock.
- 3M Automotive Attachment Tape [30 mil] (06376)
3M 06376 Automotive Attachment Tape is a .030-inch (30 mil) thick, OEM-approved acrylic foam with high performance acrylic adhesives on both sides. It has good peel and shear adhesion, good internal strength, good conformability, and good plasticizer resistance. Typical applications on cars would include the attachment of wheel lip molding, door edge molding, badges, nameplates, emblems, and other lightweight body side molding and trim. Not recommended for medium- to heavy-weight trim.
- 3M Electrical Grade Glass Cloth Tape [Silicone Adhesive] (69)
3M 69 Electrical Grade Glass Cloth Tape is a white glass cloth tape with a high-temperature thermosetting silicone pressure-sensitive adhesive. It is designed for use in 600-volt dry location applications motors, and transformers with and without varnish coating. Key attributes like high mechanical strength and resistance to high temperatures provide excellent performance. The thermosetting adhesive provides an increased bond once applied in areas of high ambient temperatures. The thermosetting adhesive provides elevated temperature performance up to Class N 392F (200C) temperature rating. 3M 69 provides insulation and solvent-resistant protection for use as coil cover, anchor, banding and core, layer and crossover insulation. This tape features a non-corrosive adhesive. It is conformable, printable and flame retardant. Features & Benefits High-temperature thermosetting adhesive has excellent solvent resistance. Class B rating to Class H provides for high temperature resistance. Glass cloth backing gives mechanical protection which lasts longer and improves safety. Uses & Applications Insulating electric and induction-type furnace power supply leads. Securing high-temperature, non-PSA insulation (such as asbestos and glass) in high-temperature areas. Securing Scotch® Fire Retardant Electric Arc Proofing Tape 77. Splicing wire SF and SFF rated 302° F (150° C), 356° F (180° C) . Reinsulating and repairing coils on mining machines. Splicing silicone-covered glass wire where splices require more abrasion resistance and mechanical strength than can be provided by silicone tapes Insulating Class "H" dry-type transformer leads. Insulating splices made on SA type wire in heat treat areas. Especially suited to high-temperature applications. Used in a variety of coil/transformer and motor applications, including an outer wrap for bobbin wound coils, banding arbor wound coils, lead pad hold down, end turn and lead anchor and connection.
- FindTape Polyurethane Foam Tape Strips [Single-Sided, Open Cell]
FindTape PS Polyurethane Foam Tape Strips are very soft, conformable low-density foam strips that can help seal out air, dust, and light when compressed. It has high absorbency to trap moisture, dust, and contaminants. Open-cell foams are resistant to molds, trap particulate matter like dust, and have good soundproofing characteristics. Each lightweight, 1-1/2 inch thick die-cut strip is coated on a single side with a pressure-sensitive rubber-based adhesive. The adhesive is protected by a silicone-treated paper liner. The adhesive has excellent long-term aging and ultimate high bond strength to a variety of surfaces as well as good temperature performance. FindTape PS single-sided foam is perfect to use in the fixture and construction of eye protection, face masks, and hard hats (strips are die-cut into 1-inch wide x 9-inch long strips). Other application ideas include recessed lighting, door, window, and cabinet seals. It also can be used to help cushion, damp sound, and absorb vibration in electronics such as printers, keyboards, computers, aircraft lights, and automotive dashboards. This open-cell foam is very soft and conformable. If your application requires more frequent washing and sanitization, try a closed-cell foam such as the V2A Volara Type 2A polyethylene foam strips.
- 3M VHB Tape (4941)
3M 4941 VHB Tape is a double-sided tape which utilizes a multi-purpose acrylic adhesive on both sides of conformable foam. The adhesive provides excellent adhesion to a broad range of high and medium surface energy substrates including metals, glass, and a wide variety of plastics, as well as plasticized vinyl. The conformable foam provides good contact, even with mismatched substrates. Application uses include ABS support structure bonding, aluminum floor bonding, bonding door kick & seal plate, bonding glass to a metal oven door, bonding muntin bars to glass, bus body side panel bonding, channel stiffener bonding on truck bodies, commercial vehicle roof vent attachment, commercial vehicle trim attachment, extruded plastic channel bonding, interior rail car construction, nameplate attachment on commercial vehicles, rail car bonding metal stiffeners, rail car light cover attachment, roof bow bonding on truck bodies, side panel bonding on commercial trailers, stack unit support bracket bonding, trim fairing bonding on truck cab exteriors and truck body nameplate bonding. If trying to bond to more porous substrates such as granite or marble 3M 4941 would be the recommended VHB to go with along with their 3M 94 primer product first on both surfaces bonding to. 3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior structural bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. See http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/ for videos showcasing the properties of VHB tape.
- JVCC Ultra High Bond Double-Sided Tape [Clear Foamed Acrylic - 20 mil] (DC-UHB20FA-C)
JVCC DC-UHB20FA-C Ultra High Bond Double-Sided Tape is constructed of a clear foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications. Used as a mounting tape in the illuminated sign industry, for fabricating road signs, joining of metals, and plastic trims in furniture construction and architectural applications. Ideal in the transportation industry. Used in the automotive aftercare market and in body shops for crash repair. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. The tape is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance. The double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours.
- JVCC UHMW Polyethylene Film Tape Value Pack [3, 5, 10, 15 and 20 mil carrier] (UHMW-PE-PACK)
JVCC UHMW-PE-PACK UHMW Polyethylene Film Tape Value Pack is a short-length value size of 5 different ultra-high molecular weight polyethylene film tapes with an aggressive acrylic adhesive. The pack includes 3 mil, 5 mil, 10 mil, 15 mil, and 20 mil thick tapes. This product's high chemical and abrasion resistance and an extremely low coefficient of friction makes it a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on either a blue film or white paper release liner.
- 3M Automotive Attachment Tape [45 mil] (06382)
3M 06382 Automotive Attachment Tape is a .045-inch (45 mil) thick, medium-density, black acrylic foam tape with high-performance acrylic adhesives on both sides. 3M Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, and higher stress handling products than other automotive attachment tapes. Typical applications include body side moldings, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components. Tape comes on a plain (unprinted) red release liner. Features & Benefits Superior adhesion build rate to automotive substrates. More conformable core gives excellent wet-out (tape contact). Black, high-strength core maintains a thin, consistent bond line. Easy liner release.
- 3M Automotive Attachment Tape [90 mil] (06394)
3M 06394 Automotive Attachment Tape is a .090-inch (90 mil) thick medium-density gray acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner. The tape uses automotive OEM (Original Equipment Manufacturer) approved acrylic foam core and adhesive technology. The foam core also features viscoelastic properties that allow it to elongate and relax when putting under load, minimizing stress on the adhesive bond line and maintaining a permanent, reliable hold. 3M 6394 is characterized by high peel and shear adhesion, high internal strength, high conformability, and excellent plasticizer resistance. Designed for reliable attachment of a wide variety of automotive exterior and interior trim on cars including running boards, ground effects, claddings, rocker panel moldings, spoilers, wheel flares, bumper trim and other larger or heavier automotive trim components.
- Cantech Extra Bond Tape [Double-Sided] (750-2445)
Cantech 750-2445 Double-Sided Extra Bond Tape is a permanent molding tape with an acrylic core coated on both sides mainly used to attach trims side moldings and emblems to vehicles. Can be used to replace mechanical fasteners and welds. Has a uniform high-tack acrylic adhesive system that sticks well to uneven surfaces. Its double-sided adhesive withstands harsh weather conditions. Features of the tape include water-resistant, highly conformable, flexible and compressible.
- FindTape Double-Sided LED Strip Lights Tape
FindTape LSLT Double-Sided LED Strip Lights Tape is the perfect LED strip light tape for indoor/outdoor use, such as stair lighting, under cabinets, on gazebos and decks, and even under stair lighting for walkway visibility at night or any time an LED. This double-sided LED Strip light tape will absorb the thermal expansions of the two different materials and maintains high impact resistance even at temperatures below 32°F (0°C). You can install the light strip upside down or on an overhead surface. In addition, this double-sided LED strip lights tape will eliminate the need to use a primer or adhesion promoter when bonding a tape to an LSE surface. Features & Benefits Perfect LED strip light tape for indoor/outdoor use This tape has a special coating in order for it to adhere to low surface energy (LSE) Resistant to UV, aging, softening agents, and solvents High level of resistance to peel and shear loads Closed cell structure is wind and water resistant May act as a sealant and forms a permanent tension free bond
- ISC High Heat Aluminum Foil Tape (RTAF)
ISC RTAF High Heat Aluminum Foil Tape is a high heat foil protection tape can be used to protect anything from temperature extremes. Conformable foil backing makes it easy to use in those tough areas. Protect plastic on snowmobiles or motorcycles from aftermarket pipe installation. Cover up those wheel weights on race cars and match the chrome. Easy peel and stick adhesive. The temperature use range is -35°F to 300°F. Not to be used on direct contact of the exhaust. Aluminum/chrome color only.
- JVCC Ultra High Bond Double-Sided Tape [White Foamed Acrylic - 118 mil] (DC-UHB120FA-W)
JVCC DC-UHB120FA-W Ultra High Bond Double-Sided Tape is constructed of a white foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications. The double-sided (AKA double-coated) tape is ideal for structural bonding applications in the transportation industry; i.e. fixing body and roof panels in the bus and truck industry, mounting/fixing car side molding, and emblems. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. The tape is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance. Tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours.
- JVCC Ultra High Bond Double-Sided Tape [White Foamed Acrylic - 25 mil] (DC-UHB25FA-W)
JVCC DC-UHB25FA-W Ultra High Bond Double-Sided Tape is constructed of a white foamed acrylic system which is ideal for structural bonding applications to mount/fix car side molding and emblems. Also used for bonding of metal furniture, cabinets, lockers, and plastic extrusion fixing. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. JVCC DC-UHB25FA-W is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance. This double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours. Image does not show a full 36 yard roll.
- JVCC Ultra High Bond Double-Sided Tape [Solid Acrylic - 45 mil] (DC-UHB45)
JVCC DC-UHB45 Ultra High Bond Double-Sided Tape is a 45 mil thick structural grade double-sided (AKA double-coated) tape comprised of an integral core of solid acrylic polymer, coated on both sides with a uniform high-tack acrylic adhesive, and carried on a white polyethylene release liner. It provides a superior, permanent bond between a wide variety of substrates, including glass, sealed wood, metals, painted metals, composites, and some plastics. Withstands a wide range of weathering and temperature conditions without losing adhesion. Solid acrylic core gives tape superior strength; it can be easily applied and cleanly cut, yet is flexible, moldable, compressible, and conformable to intricate shapes. The tape will bond to most surfaces, but a thorough evaluation is recommended when bonding low energy surface material such as PVC, ABS, Polyethylene (PE) and Polypropylene (PP). Not recommended for bonding Teflon, Tedlar, silicone or EPDM. JVCC DC-UHB45 is used primarily in the transportation industry, automotive, truck, trailer and bus, signs, graphic art assemblies, furniture/appliance manufacturing, and RV skin to frame assembly. Rugged metal to metal bonds to replace welding, rivets, bolts, screw, and cementing. It will maintain adhesion at sub-zero temperatures and is non-staining and will not harden or become brittle with age. It isolates and dampens vibration and shock. DC-UHB45 is approved for certain GM, Ford and Chrysler specifications.
- JVCC Ultra High Bond Double-Sided Tape [White Foamed Acrylic - 43 mil] (DC-UHB45FA-W)
JVCC DC-UHB45FA-W Ultra High Bond Double-Sided Tape is constructed of a white foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications. Ideal for structural bonding applications in the transportation industry. Also used to bond plastic and wooden window glazing bars and to fix architectural cladding panels. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. The tape is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance. This double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours. Image does not show a full 36 yard roll.
- JVCC Ultra High Bond Double-Sided Tape [Grey Foamed Acrylic - 78 mil] (DC-UHB80FA-G)
JVCC DC-UHB80FA-G Ultra High Bond Double-Sided Tape is constructed of a grey foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications. Ideal for structural bonding applications in the transportation industry - e.g. fixing body and roof panels on buses and trucks and mounting/fixing car side molding and emblems. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. The tape is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance. This double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours. Image does not show a full 18 yard roll.
- JVCC Ultra High Bond Double-Sided Tape [White Foamed Acrylic - 78 mil] (DC-UHB80FA-W)
When you need an all-purpose double-sided tape that offers high shear strength, very good tack, UV resistance and excellent adhesion on many surfaces, choose JVCC DC-UHB80FA-W Ultra High Bond Double-Sided Tape. This white foamed acrylic, 78-mil tape double-sided (AKA double-coated) tape offers superior bonding for demanding applications. The pressure sensitive adhesive is carried on a red, easy to remove, release coated polyethylene liner. Note that the image does not show a full 18-yard roll. Product Applications Bonding plastics, sealed woods, metals and composites Adhering thick mil plastic sheeting to a wood frame to create a storm window Attaching household items (pictures, hooks, decorative items, etc.) Securing accessories in and on vehicles NOTES: evaluate before bonding to low energy surface material like polypropylene, polyethylene, Teflon and silicones. Lower energy surfaces may require an adhesive promoter or primer such as IPA (isopropanol) on the substrate prior to application. View this Adobe .pdf reference document for information on surface preparation. Application Tips After removing release liner, be careful not to contaminate acrylic adhesive. Immediately bond tape to surface without trapping air between the tape and the surface. Application pressure should be a minimum of 15 pounds per inch of tape width to achieve maximum bond strength. Dwell time (time that tape must be in contact with both surfaces before it reaches maximum adhesion) is 1 to 24 hours.
- JVCC UHMW Polyethylene Film Tape [15 mil carrier] (UHMW-PE-15)
JVCC UHMW-PE-15 UHMW Polyethylene Film Tape is a 15 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on either a blue film or white paper release liner.
- Scotch Foil Tape [UL 181 A & B listed / Linered] (3326-A)
Scotch 3326-A Foil Tape is specially designed for use on UL listed flexible and rigid air ducts. Its specially formulated acrylic adhesive bonds quickly and holds even at 25°F. Its soft aluminum handles and applies easily but still provide strength for UL 181A and ULB FX compliance. For long-term, indoor use. Resists moisture, dust, and chemicals. The printed backing provides code compliance verification for building inspectors. A brand of 3M. Features & Benefits Soft aluminum applies easily Designed for duct tape sealing and general repairs Conformable with silicone-treated liner Can be used under all weather conditions Resists water vapor, odor and smoke transmission Adhesive is protected until the liner is removed For UL 181A and ULB-FX compliant Printed backing provides code compliance verification for building inspectors
- Shurtape High Performance Grade Temperature-Resistant Masking Tape (CP-650)
Shurtape CP-650 High Performance Grade Temperature-Resistant Masking Tape is engineered utilizing a heavy smooth crepe paper backing combined with a moderate temperature, rubber adhesive system. This high heat masking tape exhibits a smooth, consistent unwind which delivers a user-friendly product during application. Shurtape CP 650 is ideally suited for demanding masking applications in the transportation, marine, and metal fabrication industries and is often used as automotive masking tape. Uses & Applications Designed for today's high tech transportation industry (auto, coaches, buses, and marine). Metal preparation, painting, coating and gel coat masking. Strong backing to hold up to the most demanding applications. Features & Benefits Removes cleanly (warm and cold) with no adhesive residue in application temperatures to 325°F. High temperature stability through multiple bake cycles. Strong backing for tear and sliver resistance. Excellent adhesion to metals, rubber, plastics and fiberglass. Conformability for rounding curves and contours. Clean, flat edges for sharp paint lines. Solvent and moisture resistant to minimize bleed-through.
- T-REX Super Glue Tape [Double-Sided]
T-Rex Double Sided Super Glue Tape features high-tack acrylic adhesive that sticks on contact for fast fixes. This double-sided super sticky tape is a great alternative to glue for numerous applications including mounting, automotive solutions, repairs requiring two surfaces to be adhered to each other, craft projects, and more! Super glue tape provides aggressive adhesion on a variety of surfaces, including ceramic, concrete, glass, fabric, metal, plastic, tile, wood and many more. Plus, it won't stick to skin like traditional super glue and can be torn by hand for easy use. Features & Benefits High-tack double sided tape featuring acrylic adhesive for permanent repairs Clear adhesive for discreet applications and repairs Sticks on contact to a variety of surfaces including ceramic, concrete, glass, fabric, metal, plastic, tile, wood and more Won't stain surfaces like traditional super glue Safer to use than traditional super glue and doesn't bond to skin
- Scotch Performance Green Masking Tape (233+)
233+ Performance Green Masking Tape delivers consistently superior performance on moldings, plastic, glass, metal, rubber and paint. Balanced four-part construction includes flexible backing that applies easily around vehicle curves and contours and our patented adhesive that sticks at a touch, stays put and removes without transfer for consistently outstanding paint lines. A brand of 3M. Built for Automotive Aftermarket Work Through and Through Auto body professionals will recognize the familiar green color of our Scotch® Performance Green Masking Tape 233+. The distinctive green paper backing helps improve visibility for more accurate edge alignment and is highly conformable – it resists breaking even around complex contours of a vehicle, making for fast application and eliminating the need to apply additional tape. But the backing is only one part of our tape design, balanced specifically for superior performance in auto body paint repair and maintenance. Features & Benefits Features the best developments in premium masking tape technology Unique green backing is highly conformable and has a clean edge designed for critical masking applications Green backing improves visibility and accuracy during paint masking Specially formulated adhesive sticks to most surfaces and removes cleanly for up to five days Adhesive formula removes cleanly in one piece with no adhesive residue Remains in place around corners, over contours and irregular surfaces Resists paint bleed-through to help create super-sharp paint lines Green backing improves visibility and accuracy during paint masking Withstands surface temperatures up to 250° F/ 121° C for 30 minutes for paint bake operations Easy Handling. Good Surface Contact
- JVCC Double-Sided PVC Film Tape (DC-4414W)
If you're looking for an extremely aggressive adhesive that bonds to almost everything, choose JVCC DC-4414W Double-Sided PVC film tape. It's coated on both sides (AKA double-coated) with a solvent-based acrylic adhesive that is resistant to water vapor, aging, UV, and temperature. It has just 1 minute dwell time. JVCC DC-4414W double-sided tape comes on a gold siliconized paper release liner. Product Applications Mount signs and large format graphics Bond trims in automotive and other industries Securely attach extruded plastic profiles in furniture and general industries FindTape has this tape available in various widths, and each roll is 36 yards in length. We offer a huge selection of double-sided tape for many kinds of applications, from scrapbooking and home crafts to heavy-duty industrial use. With more than 5 million rolls of tape sold since 2004, we are your pressure-sensitive adhesive tape specialists. If you have a question about our products, email us at questions@findtape.com.
- 3M Urethane Foam Tape [Single-Sided, Open Cell] (4300 Series)
3M 4300 Series Urethane Foam Tape is a conformable, grey, low-density, open-cell single-sided foam tape with pressure-sensitive acrylic adhesive coating. The adhesive is protected by a 0.003 inch (3 mil) thick tan, silicone-treated paper liner and has a very soft, conformable low-density foam which can help seal out air, dust, and light when compressed 50%. Has high absorbency to trap moisture, dust, and contaminants. Application ideas include recessed lighting, door, window, and cabinet seals. It also can be used to help cushion, damp sound and absorb vibration in electronics such as printers, keyboards, computers, aircraft lights, and automotive dashboards. The adhesive has excellent long-term aging and ultimate high bond strength to a variety of surfaces as well as good temperature performance. Please note extra care should be taken when handling these delicate rolls of tape to avoid having tape fall off the tape core.
- ISC Blue Hi-Temp Masking Tape (RTMT) [Discontinued]
ISC Racers Tape Blue Hi-Temp Masking Tape is a masking tape used for auto body automotive work (not your standard blue painters tape). It is engineered for the racing fabrication industry and is designed to be residue-free even under extreme conditions. ISC's Blue Hi-Temp Masking is ideal for use in painting, metal fabrication and powder coating in the racing and marine industries. The tape can resist a range of temperatures, up to 250°F for 30 minutes (suitable for medium temperature paint bake operations). Even when subject to high temperatures, a cured rubber adhesive system allows for clean removal from metal, rubber, plastics, and other surfaces and still results in sharp paint lines. The tape is conformable to irregular surfaces and it resists solvents and moisture to minimize paint bleed-through and rework. It is also compatible with solvent and latex-based paints and its strong crepe paper backing (which is treated with heat and solvent resistant saturant) resists tears and silvers.
- Nashua General Purpose Foil Tape - 2 mil Linered [Overstock] (322)
Nashua 322 General Purpose Foil Tape has a 2-mil thick aluminum foil backing and is specially designed for taping joints and seams against moisture and vapor on foil jacketing insulation. This tape is appropriate for a variety of insulation uses such as air-conditioning, heating and ventilation systems. Nashua 322 is used in the automotive industry for general purpose repairs. Nashua 322 General Purpose Foil Tape has excellent conformability to curved surfaces like corners and joints and has excellent quick stick adhesion (very high tack). Nashua 322 is UV and moisture resistant, mold and mildew resistant, and UL 723 Classified (meets flammability requirements for use in construction and marine applications). The synthetic rubber adhesive of Nashua 322 is non-solvent for less odor and low VOC content and has good performance in all-weather conditions.
- JVCC Premium Colored Vinyl Tape (V-36P)
Use JVCC V-36P Premium Colored Vinyl Tape to put your organization in compliance with OSHA requirements for lane marking and safety coding. This high-quality vinyl tape is available in many colors and is suitable for a wide variety of uses in indoor public, commercial and industrial settings. JVCC V-36P vinyl tape is also known as Splice Tape, Dance Floor Tape and Marley Tape. It has 25 percent more adhesion and is 1 mil thicker than regular standard JVCC V-36 vinyl tape which gives it its premium name. This colored vinyl tape is also perfect for marking parts and accessories, since sharpie markers write well on it, and color coding cell phones and other devices with their accompanying chargers and accessories. Features and Benefits Sharpie-friendly "write-on" capability Provides a highly effective barrier against moisture and vapor Resistant to water, sun, aging, acids, alkalis, corrosive chemicals and oil The tape will not corrode brass, steel, copper or aluminum Highly conformable Good resistance to impact, abrasion and rupture Product Applications Temporary decorating and striping on vehicles, sporting equipment and boats Color coding equipment and accessories Lane marking Safety coding for OSHA requirements Harness and pipe wrapping Identify hazardous or restricted areas Duct and joint sealing Masking for hard chrome plating and anodizing Outlining designs on corn hole boards Marking tape for product during manufacturing process Tape floor protector to carpet Temporary seaming of PVC performance surfacing (for dance competitions, etc.)
- JVCC Duct Tape Patch (DTP-01)
JVCC DTP-01 Duct Tape Patch is a quick patch used for truck fleets and the racing industry. It's a patch or sheet of premium grade duct tape that comes on a fast removing paper release liner for instant quick fixes after body damage. Duct Tape Patch is also known as a fender bandage. Please note that Duct Tape Patch rolls are manually rewound onto a release liner so they will not be wrinkle-free. JVCC DTP-01 Duct Tape Patch is available in two convenient and easy to use sizes; 8 in. x 4 ft. or 8 in. x 8 ft. Both sizes are available in white or black colors.
- Oralite American Flag Microprismatic Retroreflective Sticker Decals
Oralite American Flags Microprismatic Retroreflective Decals are automotive stickers made from Daybright reflective material. (Oralite is the Oracal Group's new brand name for Reflexite.) These thin and flexible decals have superior durability and can withstand high pressure washing while resisting edge lift. The microprismatic technology provides the longest sight detection distance, ensuring your patriotic decal will be seen from far away! They also maintain photometric reflectivity after impact, collision, or years of wear. These high-performance polyester film decals are weather resistant. Ideal for trucks, trailers, recreational and other automotive applications. Features & Benefits Reflective American Flag decal. Made from Daybright reflective material. Microprismatic technology provides the longest sight detection distance. Weather-resistant. Maintains photometric reflectivity after impact.
- JVCC Colored Vinyl Tape (V-36)
JVCC V-36 Colored Vinyl Tape is a durable tape used for marking floors/lanes, color coding, decorating, temporary striping on vehicles and boats, and to identify restricted or hazardous areas. Used extensively on school gym floors all kinds. Helps with safety coding to meet OSHA requirements. Can also be used for masking of hard chrome plating and anodizing, harness and pipe wrapping, and duct and joint sealing. JVCC V-36 Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape. This tape is available in 13 OSHA colors: yellow, white, black, clear, red, orange, light blue, dark blue, gray, purple, emerald green, kelly green & dark brown. Features include: "Write-on" capability. Highly conformable and good abrasion/impact resistance. Provides vapor/moisture barrier. Resistant to aging, sun, water, fungus, acids/chemicals. No corrosion to copper, brass, steel, or aluminum.
- ISC X-Flex Crash Repair Racers Tape
ISC X-Flex Crash Repair Racers Tape is a large sheet of crash repair tape designed for that quick racing repair to get your car back on the track after an accident. Unlike other body repair patches, X-Flex is reinforced with a layer of aluminum, making it very durable and strong. This tape is widely used in the Sprint Cup, Nationwide, and Camping World Truck series races. X-Flex Racers Tape has a highly aggressive butyl rubber adhesive that will adhere to any clean surface. X-Flex comes in either 11-inch x 15-inch patches for short track or in 11-inch x 30-inch patches for NASCAR. Available colors are black, white, blue, yellow and red. Please note since X-Flex is paint applied to a reinforced aluminum backing you will sometimes see areas of the silver aluminum underneath the paint. These patches are designed for short-term patch repair however and during that time should still look aesthetically pleasing. Also, the wide width aluminum/butyl rubber combo is extremely difficult to work with and causes wrinkles and gaps in the release liner when the liner is put back on to the tape after the aluminum backing is painted, but it should not affect the performance of the product.
- ISC Standard-Duty Racer's Tape [Duct Tape]
ISC Standard-Duty Racer's Tape is a multi-purpose colored duct tape used for many racing applications. It comes in brilliant colors and tears straight and easy. Standard Duty Racing Tape is used for temporary damage repair, securing racing uniforms, and taping body seams in qualifying.
- ISC Surface Guard Tape [14 mil Heavy Duty Outdoor Grade] (Helicopter-OG-HD)
ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape is conformable and extremely strong 14-mil outdoor grade polyurethane tape. Also known as helicopter blade/leading edge wing tape, the thick film backing provides exceptional protection from tearing, punctures, erosion, and abrasion. ISC's surface guard tape also protects against extreme temperatures, ultraviolet light, and automotive solvents. The tape is clear (transparent) and comes on a white paper, 92-pound polycoated release liner. Helicopter-OG-HD Surface Guard Tape Features & Benefits Won't yellow over time. Exceptional paint protection. Protects against UV light, hot and cold temperatures, solvents. Resists erosion, abrasion, tears and punctures. Made from polyurethane (not vinyl or PVC); stands up to abuse. Extremely rugged; must be cut with scissors or razor knife. Durable, easy-release liner. Doesn't require solvent or heat to activate. Product Applications Body panels on race cars Bicycle frames Skis Kayaks Surfboards Ground effects Bumpers Tailgates Top fuel wings Trailer walls Spring car wings Roll cages Headlights Wheel wells Truck beds Toolboxes Hood and door edges Protects bar code labels in extreme conditions Rail protection on stand-up paddle boards (SUPs) Any painted or unpainted surface that is prone to weathering, chipping or scratching
- JVCC Premium Colored Vinyl Tape [Plastic Core] (V-36P-PC)
JVCC V-36P-PC Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; temporary decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P-PC Vinyl Tape is wound on a 3 inch diameter plastic core (unlike standard vinyl tape which comes on a standard cardboard core). This tape may be used for clean room applications; however please note rolls do NOT come individually bagged if that is a requirement of your cleanroom (they just come bulk packed). This vinyl tape is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape. Features & Benefits Long shelf life. "Write-on" capability. Provides very effective vapor/moisture barrier. Highly conformable and good abrasion/impact/rupture resistance. Resistant to aging, sun, water, oil, acids/alkalies/corrosive chemicals. No corrosion to copper, brass, steel, or aluminum.
- 3M Lens Repair Film Tape
You can use the 3M Lens Repair Film Tape to repair cracked and broken car and truck tail lights, signal lights, and other automotive lenses quickly and easily. An airtight seal is created by attaching a durable and flexible plastic film to the curved surfaces of the lenses with a strong adhesive. It is available in three colors and can be used to fix rear lights, turn signals, and other problems. It comes in two sizes: sheets measuring 3.75 inches by 7.75 inches and rolls measuring 1.875 inches by 60 inches. Features & Benefits Strong adhesive backing provides temporary repair Cut film to the size of your repair Helps prevent further cracking or breakage to plastic lenses Film resists yellowing as it ages, maintaining its original transparency Available in red, clear and amber to match texture and color of existing lenses Available (2) Sizes: 3.75 inches x 7.75 inches (sheet) or 1.875 inches x 60 inches (roll)
- Scapa Cloth Tape (175)
Scapa 175 Cloth Tape is a general-purpose conformable cotton cloth tape single coated with a natural rubber adhesive. It's non-thermosetting adhesive and backing are suitable for skin contact. The tape is paintable. Uses of the Scapa 175 Cloth Tape include: motor coil winding; wire harness wrap and other bundling applications; general purpose tape for surfaces requiring a high degree of stain or corrosion resistance where high tensile strength is not required; electrical tape applications; and finger taping.
- ISC Surface Guard Tape [8 mil Outdoor Grade] (Helicopter-OG)
Formerly referred to as helicopter blade/leading edge wing tape, ISC Helicopter-OG Surface Guard Tape is an extremely durable and conformable polyurethane tape. It has an 8-mil thick polyurethane backing which is highly effective at protecting paint from abrasion, erosion, tearing and punctures. This high-performance tape also protects against temperature extremes, UV light and automotive solvents. It will not yellow with age. The clear (transparent) polyurethane tape stands up to abuse, and is supplied on a white paper release liner. Features and Benefits Polyurethane (more durable than PVC or vinyl) Outdoor grade Resistant to temperature extremes, solvents and ultraviolet light Conforms to various surfaces Extremely tough film (must be cut by scissors or razor) Supplied on 92-pound easy-release polycoated liner Does not require solvent or heat to activate Product Applications Bicycle frames (protects paint from scratches) Paddle boards Sand rails SUP boards, surfboards Protect finish on canoes and kayaks Ground effects Race car body panels Top fuel wings Tailgates, bumpers, trailer walls Sprint car wings, roll cages Headlights Toolboxes Wheel wells, truck beds, door and hood edges Protect bar code labels in extreme conditions (such as ski resorts) Motorcycles (product mentioned in October 2008 issue of Motorcycle Consumer News) To protect any surface, painted or unpainted, from chipping, scratching or weathering Note: Helicopter-OG surface guard tape is also available in 14-mil thick heavy-duty outdoor grade version. If you're looking for a tape to protect skis, please see ISC's Helicopter-OG-HD tape, which has more aggressive adhesion. Packaging and Shipping Notes: Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package).
- Gorilla Crystal Clear Repair Tape [Fix, Patch & Seal]
Gorilla Clear Repair Tape is a crystal clear, heavy duty tape made with a specially formulated backing for extreme durability. It features the strength of Gorilla Tape in a weatherproof, airtight, tape that won’t yellow outdoors. Unlike most duct tapes, Gorilla Clear Repair Tape is easy to tear by hand and can be applied to wet surfaces (Surface must be clean and non-porous. For wet surfaces, water must be rubbed/pressed out from underneath the tape. If water cannot be removed, the tape will not stick. Textured surfaces can be difficult to tape when wet.) Fix, patch, seal, hold and protect almost any surface with a crystal-clear appearance for a perfect fix every time. Gorilla Clear Repair Tape is made with an extra thick adhesive layer providing heavy duty performance in thousands of applications. The crystal clear finish will not yellow outdoors and the waterproof backing, UV and temperature resistance make this tape an excellent choice for outdoor projects. Product Features Heavy-duty Crystal clear Weatherproof Easy to Tear by Hand Airtight **Surface must be clean and non-porous. For wet surfaces, water must be rubbed/pressed out from underneath the tape. If water cannot be removed, the tape will not stick. Note: Textured surfaces can be difficult to tape when wet. Product Applications Leather seat cushions Automotive Plastic inflatables Tarps Awnings Covers Plastic repair Labeling Camping Cracked smartphones
- ISC Dull-Finish Racer's Tape [Gaffers Tape]
ISC Dull-Finish Racer's Tape will get you to the finish line every Saturday night. A high-quality gaffers tape on an ISC Racer's Tape branded core, this vinyl-coated cloth tape is designed for use in the motorsports industry. With a thickness of 12 mils and high adhesion and tensile strength, it will hold securely while conforming to irregular surfaces. And it's rated to perform at up to 200 degrees Fahrenheit, so you know it can handle the extreme temperatures of racing. Racer's tape can be used for marking your pit box, emergency body repairs, tool marking and waterproofing. It comes in a variety of colors with a low gloss finish, so your touch-up work won't stick out unless you want it to. And since it comes off clean, you won't waste time scraping off gummy residue back at the shop. Get a wheel up on the competition today.
- tesa PET Fleece Wire Harness Tape (51608)
tesa 51608 PET Fleece Wire Harness Tape is the universal tape for wire harness bundling in the passenger compartment. This anti-abrasion tape combines important features such as noise dampening and bundling strength while keeping harnesses flexible, thus supporting an easy harness assembly process at the OEM. This door/mirror harness tape features a rubber-based adhesive that is optimized for manual application. Features & Benefits Noise dampening Abrasion resistant. Flexible and smooth Tear resistant Stable unwind force Age-resistant Strong adhesion Hand-tearable
- T-REX Clear Repair Tape
T-REX Clear Repair Tape is an all-weather crystal clear construction with strong adhesion to rough and wet surfaces making it ideal to use for repairs over a wide range of temperatures and weather condition. With its long-lasting holding power and durable puncture-resistant backing, this tape provides a waterproof and UV-resistant seal to almost all repairs. This see-through finish tape can be used for many fixes such as cracks on cell phones, plastic bins, mirrors, windows, tents, headlights and more. For any big or small fixes, this TREX tape is a great choice to use for any repairs you need. Features & Benefits Aggressive adhesive sticks to wet surfaces. All-weather for use on indoor and outdoor repairs. Applies at below-freezing temperatures. Hand tear-able for easy application. Waterproof backing for water-resistant repairs (after application to the surface).
- tesa PET Cloth Wire Harness Tape [Flame Retardant] (51026)
tesa 51026 PET Cloth Wire Harness Tape is a high-strength tape designed for bundling and wire protection of automotive wire harnesses typically located in engine compartments of motor vehicles. Made from PET cloth and a solvent-free acrylic adhesive that is compatible with newer halogen-free cable jacketing materials (PE/PP). Because of the intended application, this anti-abrasion tape possesses excellent temperature, weather, and aging resistance in addition to being flame retardant. This door/mirror harness tape is fogging and halogen-free. The flexible and smooth construction allows for easy application on inconsistent surfaces. Can be used for manual or automatic applications. Country of Origin: Germany.
- Sharpline Professional Pinstriping Tape [Reflective]
As a leading manufacturer of professional-grade vinyl pinstripe and roll stripe products, Sharpline Professional Reflective Striping Tape is a reflective film designed to reflect light in dark conditions. Therefore, this product may help improve safety and visibility during the night. Primary uses include commercial vehicles, cars, automobiles, boats, railroad and bus graphics, sign graphics, and striping (great for motorcycle helmets). When high-intensity light hits the black film at night, it reflects whitish/tan. This reflective stripping tape meets the needs of professional restylers as well as retail consumers around the world. These roll stripes come in solid colors, including the following widths: 1/4 inches, 1/2 inches, and 7/8 inches. The lengths of these roll stripes are 50 feet. In addition, we offer a variety of colors, including black, orange, blue, red, and white, and a variety of combinations of those colors. Features & Benefits Designed to reflect light in dark conditions High-quality products from a leading manufacturer Suitable for cars, trucks, trains, and buses (great for motorcycle helmets) Known for award-winning products Featuring state-of-the-art technology These solid color roll stripes come in 1/4, 1/2, and 7/8-inch widths; the lengths are 50 feet A variety of colors are available, including black, orange, blue, red, and white
- JVCC Dry Vinyl Tape (DVT-76)
JVCC DVT-76 Dry Vinyl Tape is a non-adhesive plasticized polyvinyl chloride film tape. The tape is self-fusing so it will cling firmly to its own backing for a tight wrap when encircled around an object. Since JVCC DVT-76 is not coated with an adhesive it will not stick or adhere to other surfaces. JVCC DVT-76 Dry Vinyl Tape has high elongation and good strength, which makes for easy binding of wire harnesses for the automotive industry. Dry Vinyl Tape is also used for plating applications - high stretch, easy unwind, good "cling" characteristics and great conformability provides for superior masking in hard chrome and other plating applications.
- Sharpline Prostripe Pinstriping Tape [MultiStripe]
This Sharpline Prostripe MultiStripe Pinstriping Tape is specifically designed for the needs of professional automotive repair and collision experts. Vinyl roll striping comes in thirteen colors and is made of professional-quality vinyl. Get a customized look with Prostripe striping and graphics; the roll stripes come in the following widths: 3/16 inches, 1/4 inches, 5/16 inches, 7/16 inches, 1/2 inches, and lengths: 40 ft & 50 yds (the roll size varies depending on the design). As a reference, here are the spacings for the following width sizes: 3/16-inches with a 1/16-inch stripe, 1/16-inch gap, and 1/16-inch stripe; 1/4-inch strips have a 1/16-inch stripe, a 1/16-inch opening, and an 8-inch stripe; 5/16-inches have a 1/16-inch stripe, a 1/8-inch space, a 1/8-inch stripe; 7/16-inches have a 1/16 inch stripe, 3/16 inch opening, and a 3/16 inch stripe; 1/2-inches have 1/8 inch stripes, 1/8-inches gap, and a 1/4-inch stripe A variety of colors are also available, including black, blue, red, white, silver, chrome, buckskin, spectra red, bright gold metallic, pewter metallic, silver metallic, charcoal metallic, and medium dark charcoal. Features & Benefits It's specifically designed for professionals in auto repair and collision Customize your vehicle with Prostripe striping and graphics. Prostripe premium high-performance vinyl film Selection of top-selling stripe sizes and colors Vinyl roll striping comes in a variety of 13 colors, six single colors, and seven color options
- Sharpline Prostripe Pinstriping Tape [Single Stripe]
Sharpline Prostripe Pinstriping Tape is designed to meet the professional market's demands. They are available in a variety of professional-quality vinyl roll striping products in eight solid color options, six single color options, and two color options as well. Customize your vehicle with Prostripe striping and graphics; Available in solid colors; the roll stripes are available in the following widths: 1⁄16 inches, ⅛inches,3⁄16 inches, ¼ inches, 5⁄16 inches, 7⁄16 inches, ½ inches, and lengths: 40 ft & 50 yds (the roll size varies depending on the design). Features & Benefits Customize your vehicle with Prostripe striping and graphics. Prostripe premium high-performance vinyl film Selection of top-selling stripe sizes and colors Vinyl roll striping comes in eight solid colors, six single colors, and two color options
- ISC Neon Dull-Finish Racer's Tape [Gaffers Tape]
You'll be ready for anything a night at the races can throw at you with ISC Neon Dull-Finish Racer's Tape. This low gloss, vinyl-coated cloth tape is 12 mils thick with high transfer resistance for great bonding even under the toughest racing conditions. Yet it tears by hand and comes off residue-free, allowing for quick work at the track and in the shop. And your work will stand out in four bright fluorescent colors. ISC Racer's Tape conforms well to irregular surfaces, which you'll encounter plenty of at the track. Use it to mark out your pit area on asphalt or concrete, or to quickly patch up a body panel. You can also mark tools, or use the yellow tape to put a rookie stripe on your rear bumper. Order individual colors or a variety pack and stay on track at every event.
- JVCC Duct Tape Sheet (DTS-02)
JVCC DTS-02 Duct Tape Sheet is a 12 inch wide by 20 inch long sheet of industrial-grade duct tape that can be used for multiple quick fix applications. It comes as s single sheet of premium grade duct tape on a fast removing paper release liner for instant quick use. Duct Tape Sheets can be used as fender bandage or racing patch and for other automotive repair applications. Duct tape sheets are manually rewound onto a release liner so please note that they will not be perfectly wrinkle-free.
- Oralite Microprismatic Conspicuity Tape (V92-DB-COLORS)
Oralite V92 Daybright Colors Microprismatic Retroreflective Conspicuity Tape is prismatic conspicuity material available in a variety of colors including red, white, blue, green, orange and gold. Oralite is the Oracal Group's new brand name for Reflexite. The thin, flexible sheeting has a unique appearance featuring a printed triangular white line pattern. V92 Daybright Colors will enhance the visibility of any police, fire or EMS vehicle. It provides superior visibility and conspicuity to oncoming motorists which results in improved safety and image. UV and solvent resistant coatings ensure durability which allows for rugged outdoor use on the sides and rear of tow trucks, trailers, school buses, farm equipment, automobiles and all types of mobile and industrial equipment. Aggressive pressure-sensitive adhesive backing designed for rigid metal substrates. Tape is weather-resistant and has a 5-year warranty. Maintains reflectivity after impact. Conspicuity-grade material like this is typically 6 or 7 times more reflective than a comparable color in an engineering-grade reflective tape since prism technology is used instead of glass beads so you would be able to see it from much farther distances away. Photos of V92-DB are taken with a flash camera in order to show the reflectivity of the tape; the colors of the tape will be much darker if a high-intensity light source (like the flash from a camera or car headlights) are not being directed at the tape. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Gold Yellow Orange Red Green Blue 0.2° -4° 460 425 310 185 75 75 35 30° 250 230 165 100 60 60 20 0.5° -4° 100 90 70 40 25 25 10 30° 65 60 45 25 15 15 5
- Duck Brand Tail Light Tape [Translucent]
Duck Brand Tail Light Tape is the perfect quick-fix solution to broken tail lights and turn signals. This tape is translucent which allows for discreet repairs to your vehicle which don’t impair or obstruct your lights. Duck Tail Light Tape is self-adhesive, and water resistant to be able to endure severe weather conditions and still maintain a durable, long-lasting hold. This easy-to-use tape is compact and can be stored anywhere. Product Features Translucent, self-adhesive tape Water resistant to withstand severe weather Easy to tear and apply Compact roll for storage anywhere
- ISC Rubberized Non-Skid Tape & Cleats
ISC Rubberized Non-Skid Tape & Cleats are rubberized, textured anti-slip tapes designed for heavy shoe traffic, yet they are comfortable enough for bare feet. This resilient medium grade non-slip product provides an unparalleled coefficient of friction in both industrial and commercial environments. It is coated with an aggressive adhesive and the tape is easily cleaned and mop-friendly. Uses for this non-skid tape treads include Steps, stairs, and platforms. Recreational vehicles, motorcycles, snowmobiles, ATVs, garden tractors, and lawnmowers. Ladders, step stools and scaffolds. Boats, skateboards, water skis, surfboards, and jet skis. Swimming pools, pool accessories and diving boards. Lap desks (helps to provide a more frictioned surface if your laptop has a tendency to not stay in place or slide off). Conveyors and pulleys. ISC Rubberized Skid are not coated with an adhesive that can be submerged or put underwater. So if when applied there is any gaping which would allow water to seep underneath to the underside of the tape water would degrade the adhesive pretty quickly.
- Sharpline Truck Paint Break Pinstriping Tape [MultiStripe]
Sharpline Truck Paint Break Pinstriping Tape are OEM replica pickup truck stripes designed to cover two-color paint-break lines on OEM pickup trucks. These vinyl roll striping tapes come in six colors and are made of professional-quality vinyl. Available in 5/8 inch and 3/4 inch widths featuring three, four, or five stripes. Color combinations include Champagne Mist Metallic & Autumn Maple Metallic, Medium Blue & Dark Blue Metallic, Silver Metallic & Black Metallic, or Arizona Beige Metallic & Brown. Features & Benefits Specifically designed for professionals in auto repair and collision. OEM replica pickup truck stripes to cover two-color paint-break lines. Prostripe premium high-performance vinyl film. Selection of top-selling stripe sizes and colors.
- Cantech Automotive Lens Tape (781)
Cantech Automotive Lens Tape quickly and inexpensively fixes broken or cracked tail lights, turn signals, parking lights, and side directionals. Available in clear, red, or amber translucent colors, this repair tape has strong adhesion and resists loosening with age and moisture. Automotive Lens Tape is used for many applications such as repairs on cars, trucks, boats, motorcycles, trailers, ATVs, snowmobiles and golf carts. This tape keeps your small repair from getting larger by offering a temporary fix, keeps out moisture, dust, and from causing corrosion. Made of water-resistant red polyethylene film coated with a long-lasting adhesive, Cantech Automotive Lens Tape offers exceptional clarity and a reliable bond. Features & Benefits Long-lasting adhesive Strong adhesion Applies smooth and holds tight Conformable Reliable bond Easy application
- FindTape Glass Bead Reflective Conspicuity Tape [DOT-C2 7 yr.] (DOT-GB)
FindTape DOT-GB Glass Bead Reflective Conspicuity Tape is an economical choice for DOT-compliant glass bead reflective conspicuity tape in an alternating red and white honeycomb pattern and 7-years of durability. The textured, also known as dimpled or bumpy, surface features light reflections from all directions that it faces resulting in constant higher visibility and improved roadway safety for motor vehicles and other machines. Even though the glass bead limits the distance of the reflection, the wider angles provide more visibility at shorter distances. Being UV stable and impact proof ensures longevity without losing any of its characteristics over time. Please note that this tape is supplied on a clear film release liner wound around a 3-inch diameter core. FindTape DOT-GB meets the Federal Motor Carrier Safety Administration (FMCSA) and Federal Motor Vehicle Safety Standard (FMVSS) regulations requiring any trailer truck over 10,000 lbs and over 80-inches wide which are required to have a 2-inch wide alternating red and white pattern marked with DOT-C2 text. The permanent self-adhesive base is suited to work on many different surfaces such as aluminum, fiberglass, steel, and more and is resistant to chemicals such as toluene, number 2 diesel fuel, TSP detergent, and xylene. The properties of this tape allow it to be used for numerous applications including transportation vehicles such as vans, buses, trailers, forklifts, tractors, and more. Retroreflective Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 250 60 30° 250 60 0.5° -4° 65 10 30° 65 10
- Oralite Agricultural Microprismatic Reflective Conspicuity Strips
Oralite Agricultural Microprismatic Reflective Conspicuity Strips are 2-inch x 9-inch pre-cut radius corner strips without any seamline. Oralite is the Oracal Group's new brand name for Reflexite. The red strips are from V82 10-year warranty material and the John Deere yellow strips are from V92 5-year warranty material. They provide unsurpassed nighttime visibility with Oralite's microprismatic technology. They're a tough weather-and solvent resistant product designed for rugged outdoor use on the sides and rear of heavy equipment, farm machinery, and on agricultural & industrial utility vehicles. Reflective Radius Corner Strips are thin, flexible and are impact resistant and retain photometric reflectivity performance after impact so they maintain safety after collision or years of wear. They also provide superior durability through power washing and extreme weather (they resist edge lift). They meet ANSI/ASAE S276.5 standards and meet the requirements of LS-300C solvent resistance, section 3.6.7. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle Yellow Red 0.2° -4° 310 120 30° 165 72 0.5° -4° 70 28 30° 45 13
- Oralite Microprismatic Conspicuity Tape [Fluorescent Colors] (V98)
Oralite V98 Microprismatic Retroreflective Conspicuity Tape is prismatic conspicuity material available in a variety of fluorescent neon colors which include lime yellow, orange and yellow. Oralite is the Oracal Group's new brand name for Reflexite. The thin, flexible sheeting has a unique appearance featuring a printed triangular white line pattern. V98 will enhance the visibility of any police, fire or EMS vehicle. It provides superior visibility and conspicuity to oncoming motorists which results in improved safety and image. UV and solvent resistant coatings ensure durability which allows for rugged outdoor use on the sides and rear of tow trucks, trailers, school buses, farm equipment, automobiles and all types of mobile and industrial equipment (designed to adhere to high surface energy substrates such as metal and glass). Aggressive pressure-sensitive adhesive backing designed for rigid metal substrates. Tape is weather-resistant and has a 5-year warranty. Maintains reflectivity after impact. Conspicuity-grade material like this is typically 6 or 7 times more reflective than a comparable color in an engineering-grade reflective tape since prism technology is used instead of glass beads so you would be able to see it from much farther distances away. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle Fluorescent Lime Yellow Fluorescent Yellow Fluorescent Orange 0.2° -4° 420 295 200 30° 200 145 100 0.5° -4° 65 45 45 30° 33 23 20
- 3M Scotchcal Striping Tape
3M Scotchcal Striping Tape is typically used to create single or double stripe patterns on vehicles and boats - in order to match existing stripes or to create original striping designs on them. The tape also resists gasoline and chemicals. Primary uses include commercial vehicles, cars, automobiles, marine, railroad and bus graphics; sign graphics; and pinstriping. 3M Scotchcal is offered in over 100 different single and double color and width patterns. view all color shades this product comes in here Typically only the widths 1/2 inch and wider have a protective release liner to remove. Narrower widths are linerless.
- Duck Brand Auto Reflective Tape
Duck Brand Auto Reflective Tape: Help stay safe when the lights go off, by turning up your visibility with Duck Brand Auto Reflective Tape. From car doors to backpacks, bicycles to helmets, this durable reflective tape boasts aggressive, all-weather adhesion and excellent reflective properties keeping you more visible during nighttime activities and in dimly lit areas. Easily mounts to nearly any standard surface or vehicle in one easy-to-peel step so staying safe stays stress-free. Features & Benefits High-visibility reflective surface. Permanent adhesive. Multi-color selection for increased visibility and awareness.
- ISC Black Reflective Tape (REF1X24)
ISC REF1X24 Black Reflective Tape blends in with black during the day and shines bright white at night when another headlight reflects it. Improves safety and nighttime visibility while maintaining good looks. Perfect for the rear of motorcycles, bicycles, snowmobiles, helmets, or anything imaginable that you want to be seen. Hardly noticeable on black, which is the color of choice on many vehicles or bicycles on the roads today. Comes in a small retail pack with a 1-inch x 24-inch strip and a 1/2-inch x 24-inch strip. Cut to desired length or pattern, then remove backing and apply. The tape has a typical coefficient of retroreflection of 30 and meets NFPA requirements.
- Oralite Diamond Steel Plate Microprismatic Conspicuity Tape [DOT-C2 5 yr.] (V52)
Oralite V52 Diamond Steel Plate Microprismatic Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 5-year durability used for commercial truck and trailer marking. Oralite is the Oracal Group's new brand name for Reflexite. It's an economical and effective alternative to the 10-year products when retrofitting equipment. The tape is a tough weather-and solvent resistant (including petrol and diesel) product designed for rugged outdoor use on the sides and rear of trucks, trailers, tankers, dump trucks, tow trucks, pick up beds, and other types of work trucks and mobile industrial equipment. Comes with the DOT-C2 certification mark as per NHTSA 49 CFR 571.108 and it is composed of cube corner (microprism) retroreflective elements integrally bonded to a flexible, smooth-surfaced, tough and weather-resistant UV stabilized polyester film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the prism facets. The resulting tape is not more than 0.008 inch thick and comes with an aggressive high-tack pressure sensitive adhesive that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated mechanical and hand washing. DOT-C2 Conspicuity Tape is manufactured by the Orafol Group and rolls are typically cut from 30-inch log rolls so will ship on a plain neutral core (or an ISC Racers Tape branded core). This comes in an alternating 6 inch red / 6 inch white diamond plate design pattern (please see Oralite V92 for the triangle design). Its distinctive diamond plate design compliments truck and trailer components. The tape is intended for application to medium and heavy-duty commercial vehicles including towing and recovery vehicles and a great variety of vocational work trucks, including but not limited to construction vehicles, refuse haulers, step vans, utility trucks, tank trucks, auto carriers and more. V52 Diamond Plate improves vehicle visibility from a variety of angles at night and in conditions of poor visibility, giving motorists increased reaction time. Because the product is thin and flexible, it can be easily applied to flat and curved surfaces. Maintains reflectivity after impact. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 460 75 30° 250 60 0.5° -4° 100 25 30° 65 15
- FindTape Microprismatic Sealed Reflective Conspicuity Tape [DOT-C2 10 yr.]
FindTape DOT-MS Microprismatic Sealed Reflective Conspicuity Tape is a high-quality DOT-compliant sealed micro-prismatic reflective conspicuity tape in an alternating red and white corner of the cube shape and can have retro-reflective performances up to 10 years. DOT-MS also meets the Federal Motor Carrier Safety Administration (FMCSA) and Federal Motor Vehicle Safety Standard (FMVSS) regulations requiring any trailer truck over 10,000 lbs and over 80-inches wide which are required to have a 2-inch wide alternating red and white pattern marked with DOT-C2 text. This tape is far more visible from more than three times the distance when compared to a glass bead tape alternative. The smooth surface finish of the microprismatic seal features microprism technology that creates light reflections from man-made 3-point prisms that it is facing resulting in constant higher visibility for long distances and improved roadway safety for motor vehicles and other machines. The reflection returns up to 80% of the light in a cone shape resulting in amplified reflective properties and magnified visibility. The true-white color feature allows this to perfectly blend in with any white bodywork. With its construct, the tape is very durable and can survive repeated car washes and harsh winter weather conditions. Please note that this tape is supplied on a clear film release liner wound around a 3-inch diameter core. Retroreflective Performance for Alternating 6 in. Red / 6 in. White Design Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 678 148 30° 452 92 0.5° -4° 351 71 30° 123 27 Retroreflective Performance for Alternating 11 in. Red / 7 in. White Design Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 632 152 30° 397 88 0.5° -4° 345 75 30° 115 26
- Patco Wire Harness Attachment Tape (5075)
Patco 5075 Wire Harness Attachment Tape is a tape used for wire harness attachment to headliners, flooring, and other surfaces in automotive, marine, recreational equipment, construction, and more. For permanent surface attachments. Creates an anti-squeak, anti-itch headliner barrier. The tape is conformable for curves and irregular surfaces and is a low weight, cost-effective alternative to foil. Patco 5075 creates an aggressive and permanent locking bond to fabric surfaces. Excellent longevity and high and low-temperature performance. Die cuttable. Patco 5075 has higher adhesion then Patco 5095, yet Patco 5095 is thicker and has higher tensile strength.
- Sharpline Durashield Door Edge Guard
Sharpline Durashield Door Edge Guard is a premium paint protection film designed for door edge protection. This 6 mil. urethane easily conforms around door edges to prevent paint chips on door edges. The crystal clear color is more visually appealing compared to traditional door edge molding. Protect your vehicle's paint job on vulnerable door edges with Durashield. Features & Benefits Size: 1/2 inch x 40 feet. 6 mil. thick urethane. Easily conforms around door edges. Visually appealing vs. traditional door edge molding. Prevents paint chips on door edges.
- Berry Plastics High Intensity Reflective Safety Tape [DOT-C2] (7621)
Berry Plastics 7621 High-Intensity Reflective Safety Tape is a DOT-compliant conspicuity tape used to improve visibility on utility vehicles, ramps, mailboxes, boats, barricades, agricultural equipment, automobiles, and trailers. It's an economical choice if you only need a shorter length of reflective conspicuity material. It offers a good aggressive hold and is resistant to UV, moisture, and solvents. Tape should not be repositioned. Berry 7621 comes in an alternating 11-inch red /7-inch white square design pattern and displays the DOT-C2 certification mark.
- Oralite Retro Fit Grade Microprismatic Conspicuity Tape [DOT-C2 3 yr.] (V42)
Oralite V42 Retro Fit Grade Microprismatic Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 3-year durability used for commercial truck and trailer marking. Oralite is the Oracal Group's new brand name for Reflexite. It's an economical and effective alternative to the 5 and 10-year products when retrofitting equipment. The tape is a tough weather-and solvent resistant (including petrol and diesel) product designed for rugged outdoor use on the sides and rear of trucks, trailers, tankers, dump trucks, tow trucks, pick up beds, and other types of work trucks and mobile industrial equipment. Comes with the DOT-C2 certification mark as per NHTSA 49 CFR 571.108 and it is composed of cube corner (microprism) retroreflective elements integrally bonded to a flexible, smooth-surfaced, tough and weather-resistant UV stabilized polyester film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the prism facets. The resulting tape is not more than 0.008 inch thick and comes with an aggressive high-tack pressure sensitive adhesive that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated mechanical and hand washing. DOT-C2 Conspicuity Tape is manufactured by the Orafol Group and rolls are typically cut from 30-inch log rolls so will ship on a plain neutral core (or an ISC Racers Tape branded core). This comes in an alternating 11 inch red / 7 inch white film logo design pattern (please see Oralite V92 for the 6 inch red / 6 inch white triangle design or Oralite V52 for the diamond plate design). The tape is intended for application to medium and heavy-duty commercial vehicles including towing and recovery vehicles and a great variety of vocational work trucks, including but not limited to construction vehicles, refuse haulers, step vans, utility trucks, tank trucks, auto carriers and more. V42 improves vehicle visibility from a variety of angles at night and in conditions of poor visibility, giving motorists increased reaction time. Because the product is thin and flexible, it can be easily applied to flat and curved surfaces. Also maintains reflectivity after impact. White lines in pattern give it maximum daytime visibility. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 250 60 30° 250 60 0.5° -4° 65 15 30° 65 15
- Oralite Diamond Microprismatic Conspicuity Tape [DOT-C2 10 yr.] (V82)
Oralite V82 Diamond Microprismatic Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 10-year durability used for commercial truck and trailer marking. Oralite is the Oracal Group's new brand name for Reflexite. The tape is a tough weather-and solvent resistant (including petrol and diesel) product designed for rugged outdoor use on the sides and rear of trucks, trailers, tankers, dump trucks, tow trucks, pick up beds, and other types of work trucks and mobile industrial equipment. Comes with the DOT-C2 certification mark as per NHTSA 49 CFR 571.108 and it is composed of cube corner (microprism) retroreflective elements integrally bonded to a flexible, smooth-surfaced, tough and weather-resistant UV stabilized polyester film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the prism facets. The resulting tape is not more than 0.008 inch thick and comes with an aggressive high-tack pressure sensitive adhesive that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated mechanical and hand washing. DOT-C2 Conspicuity Tape is manufactured by the Orafol Group and rolls are typically cut from 30-inch log rolls so will ship on a plain neutral core. This comes in an alternating 6 inch red / 6 inch white (or 11 inch red / 7 inch white) diamond plate design pattern (please see Oralite V92 for the triangle design). Its distinctive diamond plate design compliments truck and trailer components. The tape is intended for application to medium and heavy-duty commercial vehicles including towing and recovery vehicles and a great variety of vocational work trucks, including but not limited to construction vehicles, refuse haulers, step vans, utility trucks, tank trucks, auto carriers and more. V82 Diamond Plate improves vehicle visibility from a variety of angles at night and in conditions of poor visibility, giving motorists increased reaction time. Because the product is thin and flexible, it can be easily applied to flat and curved surfaces. Maintains reflectivity after impact. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 460 75 30° 250 60 0.5° -4° 100 25 30° 65 15
- Oralite Daybright Microprismatic Conspicuity Tape [DOT-C2 5 yr.] (V92)
Oralite V92 Daybright Microprismatic Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 5-year durability used for commercial truck and trailer marking. It's an economical and effective alternative to the 10-year products when retrofitting equipment. Oralite is the Oracal Group's new brand name for Reflexite. The tape is a tough weather-and solvent resistant (including petrol and diesel) product designed for rugged outdoor use on the sides and rear of trucks, trailers, tankers, dump trucks, tow trucks, pick up beds, and other types of work trucks and mobile industrial equipment. Comes with the DOT-C2 certification mark as per NHTSA 49 CFR 571.108 and it is composed of cube corner (microprism) retroreflective elements integrally bonded to a flexible, smooth-surfaced, tough and weather-resistant UV stabilized polyester film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the prism facets. The resulting tape is not more than 0.008 inch thick and comes with an aggressive high-tack pressure sensitive adhesive that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated mechanical and hand washing. DOT-C2 Conspicuity Tape is manufactured by the Orafol Group and rolls are typically cut from 30-inch log rolls so will ship on a plain neutral core (or an ISC Racers Tape branded core). This comes in an alternating 6 inch red / 6 inch white triangle design pattern (please see Oralite V52 for the diamond plate design). The tape is intended for application to medium and heavy-duty commercial vehicles including towing and recovery vehicles and a great variety of vocational work trucks, including but not limited to construction vehicles, refuse haulers, step vans, utility trucks, tank trucks, auto carriers and more. V92 Daybright improves vehicle visibility from a variety of angles at night and in conditions of poor visibility, giving motorists increased reaction time. Because the product is thin and flexible, it can be easily applied to flat and curved surfaces. Also maintains reflectivity after impact. White lines in pattern give it maximum daytime visibility. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Red 0.2° -4° 460 75 30° 250 60 0.5° -4° 100 25 30° 65 15
- Oralite Microprismatic Conspicuity School Bus Signs (V99-SIGN)
Oralite V99 Microprismatic Conspicuity School Bus Signs are adhesive-backed decals made from reflective 5-year warranty material. Oralite is the Oracal Group's new brand name for Reflexite. They are used on the back of school buses for signage above the emergency exit door. Helps maintain compliance with FMVSS 131 & FMVSS 217. The stickers are thin and flexible, yet have superior durability and withstand high-pressure washing and resist edge lift. The microprismatic technology provides the longest sight detection distance. Oralite School Bus Signage maintains photometric performance reflectivity after impact (preserves safety after collision or years of wear). High-performance polyester film is also weather resistant. Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle Yellow 0.2° -4° 310 0.2° 30° 165 0.5° -4° 136 0.5° 30° 45
- Sharpline Durashield Door Cups
Sharpline Durashield Door Cups are protective adhesive decals designed to prevent paint chipping around door handles. Made of 6 mil. thick urethane, these crystal clear stickers are cut to fit the vulnerable area around your vehicle door handles. Ideal for preventing scratches from fingernails and rings. Available in sizes that fit under many late-model door handles. Sizes: 3.25 inches x 3.75 inches, and 2.625 inches x 3.625 inches. Protect your paint job today with Durashield Door Cups. Features & Benefits 6 mil. thick urethane. Protects areas under door handles. Prevents scratches from fingernails and rings. Available sizes fit under many late-model door handles.
- Sharpline Prostripe Pinstriping Tape Starter Kit [with Cabinet]
Sharpline Prostripe Pinstriping Tape Starter Kit: Want to get involved in the profitable pinstripe installation business but don’t know where to start? Prostripe, the industry’s most experienced striping manufacturer can help. You can now order a selection of 25 of the most popular stripe colors and styles in one convenient starter kit. This kit also includes a free color guide and a free storage cabinet. Prostripe Pinstriping Tape is specifically designed for the needs of professional automotive repair and collision experts. Vinyl roll striping comes in various colors and widths and is made of professional-quality vinyl. Kit Includes: Color guide. Storage cabinet. 3/16 in. x 150 ft. Pinstripe Dark Charcoal Metallic (R41001) Black (R41002) Silver Metallic (R41006) White (R41008) Gold Metallic (R41016) Silver / Tomato Red (R41120) Silver / Black (R41130) 5/16 in. x 150 ft. Pinstripe Black (R42002) Charcoal Metallic (R42004) Chrome (R42005) Silver Metallic (R42006) White (R42008) Buckskin (R42104) Gold Metallic (R42016) Tomato Red (R42030) Fire Red (R42031) Burgundy (R42036) Light Gold Metallic (R420105) Gunmetal Metallic (R420107) 1/4 in. x 150 ft. Pinstripe Black (R41602) Silver Metallic (R41606) 1/4 in. x 150 ft. Solid Black (R51202) Silver Metallic (R51206) 1/2 in. x 150 ft. Pinstripe Black (R43202) Silver Metallic (R43206)
- Shurtape Super Bottom Board Tape (PC-658)
Shurtape PC-658 Super Bottom Board Tape is a 17 mil black tape used for seaming and sealing of bottom board materials used in the mobile/manufactured housing industry (pre-manufactured homes, RVs, etc.) during assembly, set-up, and maintenance. Bottom board tape, AKA under belly tape, is also used to repair bottom board holes either formed by rodents or fabricators (i.e. plumbers, electricians, etc.) during set-up and construction. Also for the protection of metal parts or surfaces in metal and/or plastic peening operations. Used in tough applications where a high tensile, adhesion, and thickness are desired. This board tape has high holding power and durability, can withstand extreme temperature fluctuations and has a waterproof backing. PC 658 comes with Shurtape's Polyblended CO-EX technology with is a co-extrusion process that melds polyethylene, cloth, and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate). Tested in accordance with UL 723.
- Shurtape SHATTERSTOP Safety Mirror Backing Tape (SS-501)
Shurtape SS 501 SHATTERSTOP® Safety Mirror Backing Tape is used on mirror backs to prevent injury from glass particles and shards in the event of breakage. SS 501 bonds reliably to the back of the mirror and its corresponding mirror backing paint, features a bi-directional woven backing that provides excellent stability and strength in both directions, and offers superior impact resistance. Apply by hand or with automated laminating equipment. Features and Benefits Excellent adhesion to mirror backing paints. Increased thread count for enhanced strength. Superior mirror protection and dimensional stability. Bi-directional woven polyolefin backing will not run in the event of mirror rupture or breakage. No release liner.
- ISC Neon Standard-Duty Racer's Tape [Duct Tape]
ISC Neon Standard-Duty Racer's Tape is a multi-purpose neon-colored duct tape which comes in four brilliant neon colors. It provides a waterproof and dirt resistant seal. ISC Standard Duty Racers Tape conforms to odd-shaped surfaces and tears straight and easy.
- ISC Black & White Checkerboard Tape
ISC Checkerboard Black & White Checkerboard Tape is designed to capture attention quickly and is a great item for all racers and their fans. It is primarily used for temporary decoration. ISC Checkerboard Tape conforms to odd-shaped surfaces and permits easy and clean removal. It is a vinyl tape laminated with mylar which comes on a paper release liner. The tape has a crisp black & white checkerboard pattern.
- ISC Extreme-Duty Racer's Tape [Duct Tape]
ISC Extreme-Duty Racer's Tape is a highly aggressive and premium heavy-duty duct tape. Extreme Duty Racers Tape has superior tensile strength, a clean release from the roll, and will not non-delaminate. Also sometimes referred to as 100 mph or 200 mph racing tape.
- ISC Non-Skid Anti Slip Tape [46 grit]
ISC Non-Skid Anti Slip Tape is a heavy-duty, long-lasting, non-skid tape used to prevent slipping and falling by providing an anti-slip safety surface. Defiant to all weather conditions, ISC Non-Skid Anti Slip Tape is ideal for indoor and outdoor applications. This tape is made from high traction silicon carbide grit Jessup 3200 Safety Track material. Installation is made easy with the instant, self-adhesive backing - no messy glues or separate adhesives for this tape. Simply peel off the backing and apply to any clean dry surface to instantly create a non-skid surface. Uses & Applications Trailer ramps Steps and ladders Racing brakes and clutch pedals Entrances and exits Kitchens, stairs, and walkways Dock areas Around work benches
- ISC Checkerboard Barricade Tape [NON-ADHESIVE]
ISC BR-CHECK Checkerboard Barricade Tape is a NON-ADHESIVE barrier tape used for barricading off or calling attention to areas such as racing pit spots. No more hassles of saving spots with trash cans or cones. The tape has white and light black diamonds. Please note this tape is not meant to be used as "Finish Line Tape" since it will not break/tear easily if ran through.
- 3M Diamond Grade Trailer Marking Kit [DOT-C2 10 yr.]
3M Diamond Grade Trailer Marking Kit is strong and rigid with a high-performance adhesive that holds securely to vehicles. Many types of markings are available in rolls, packaged pieces, and kiss-cut pieces. In addition, the easy-release liner makes installation quick and user-friendly. Features & Benefits Highly reflective at wide angles Starts bright, stays bright High brightness with wide angularity Durable markings protected by 10-year, prorated warranty Vivid red and bright white Total length: 25 yards (for 48 foot trailer option) Available pattern: 11 inches x 7 inches Available width: 2 inches
- 3M Reflective Striping Tape (Scotchlite) [Discontinued]
3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicles, cars, automobiles, boats, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets). The black film, which reflects whitish/tan at night when hit by light, has a typical coefficient of retroreflection of 30. Meets NFPA requirements. Please note 3M uses the same Scotchcal retail packaging for all their striping tapes (whether they are reflective or not); however this tape is Scotchlite reflective striping tape and the correct product numbers listed below will be on the retail packaging 79902 - 1/4 inch wide black 79905 - 1/4 inch wide blue 79903 - 1/4 inch wide gold 79907 - 1/4 inch wide orange 79904 - 1/4 inch wide red 79901 - 1/4 inch wide white (silver) 79908 - 1/4 inch wide yellow 79922 - 1/2 inch wide black 79921 - 1/2 inch wide white (silver) 79942 - 1 inch wide black 79941 - 1 inch wide white (silver) confirm 3M Scotchlite Reflective Film Series 680 Pattern No. 799-__ product numbers here Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle Blue Orange Red Black Yellow Gold Silver/White 0.2° -4° 10 20 20 30 65 70 100