Foams (Polyethylene and PVC) - Site Map

Tape Site Map > Foams (Polyethylene and PVC)

  • As the term suggests, a foam double sided tape is a double sided tape that has foam such as closed cell cross-linked polyethylene (PE) foam as the backing/carrier. The tape could be made of PE or PVC foam. The leading brands in the manufacture of the double sided foam tape are Scapa, JVCC, 3M Scotch and Duck Brand.
    • Scapa SR516V Double Coated 1/16" Foam Tape

      Scapa SR516V Double Coated 1/16" Foam Tape is a white polyethylene foam, coated on both sides with a high-performance rubber adhesive. The product is supplied on a 60# kraft release liner. Applications for two-sided foam tape include general mounting of mirrors, signs, nameplates, hooks and soap dispensers as well as mounting of reflectors and signs. Scapa SR516V can also be used for gasketing, spacing and sound deadening. Benefits of the Scapa SR516V Foam Tape include: Rubber-based adhesive provides for a good specific adhesion to a wide variety of surfaces. Its high adhesive coat weight aids in adhesion to irregular surfaces. Good quick-stick makes application easy. High shear strength gives high load bearing ability. Foam gives good thermal insulation properties. Composite die-cuts easily. Note: The last lot our converter received in of this tape came in on a gold paper, instead of white paper, liner. It's the same double-sided foam tape, just a different release liner.

    • JVCC DC-WGT-01 Double Coated Window Glazing Tape

      JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape which is designed specifically for window glazing and is AAMA-certified testing and approved. Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. The foam is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion and a very good strength. JVCC DC-WGT-01 Window Glazing Tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. Easy peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the insulated glass panel and window sash which helps prevent air and water leakage). Other uses include mounting of emblems, nameplates, plastic strips and mirrors.

    • 3M Scotch Command Picture Hanging Strips (Removable)

      3M Scotch Command™ Picture Hanging Strips make damage-free decorating quick and easy on a variety of surfaces. One click tells you Picture Hanging Strips are locked in and holding tight. Best of all, when you are ready to take down or move your pictures, they come off cleanly - no nail holes, cracked plaster or sticky residue. Command™ Picture Hanging Strips come in three sizes: Small strips hold most 8" x 10" frames (1 pound per strip set), medium strips hold most 18" x 24" frames (3 pounds per strip set) and large strips hold most 24" x 36" frames (4 pounds per strip set). Too see product video click here.

    • JVCC DC-PEF06A Double Coated 1/16" Foam Tape (Acrylic Adhesive)

      JVCC DC-PEF06A Double Coated 1/16" Foam Tape is a closed cell cross-linked polyethylene foam tape coated on both sided with a high performance solvent based acrylic adhesive. Excellent quick-stick sealing with high shear properties for efficient operation and secure bonding. Good resistance to humidity, mild acids, oil and grease. Excellent conformability and compressibility. Adheres well to textured and irregular surfaces. Applications include mounting nameplates, signs, small die cast parts, mirrors, maps, etc. Used for sound and vibration dampening in business machines, industrial equipment, copy machines, electronic component packaging and glass panel mounts, seals, gaskets, etc. The acrylic adhesive system is recommended for outdoor applications due to its higher temperature, UV, weather, chemical, and plasticizer resistance.

    • JVCC DC-PEF03A Double Coated 1/32" Foam Tape (Acrylic Adhesive)

      JVCC DC-PEF03A Double Coated 1/32" Foam Tape is a closed cell cross-linked polyethylene foam tape coated on both sided with a high performance solvent based acrylic adhesive. Excellent quick-stick sealing with high shear properties for efficient operation and secure bonding. Good resistance to humidity, mild acids, oil and grease. Excellent conformability and compressibility. Adheres well to textured and irregular surfaces. Applications include mounting nameplates, signs, small die cast parts, mirrors, maps, etc. Used for sound and vibration dampening in business machines, industrial equipment, copy machines, electronic component packaging and glass panel mounts, seals, gaskets, etc. The acrylic adhesive system is recommended for outdoor applications due to its higher temperature, UV, weather, chemical, and plasticizer resistance.

    • JVCC DC-PEF12A Double Coated 1/8" Foam Tape (Acrylic Adhesive)

      JVCC DC-PEF12A Double Coated 1/8" Foam Tape is a closed cell cross-linked polyethylene foam tape coated on both sided with a high performance solvent based acrylic adhesive. Excellent quick-stick sealing with high shear properties for efficient operation and secure bonding. Good resistance to humidity, mild acids, oil and grease. Excellent conformability and compressibility. Adheres well to textured and irregular surfaces. Applications include mounting nameplates, signs, small die cast parts, mirrors, maps, etc. Used for sound and vibration dampening in business machines, industrial equipment, copy machines, electronic component packaging and glass panel mounts, seals, gaskets, etc. The acrylic adhesive system is recommended for outdoor applications due to its higher temperature, UV, weather, chemical, and plasticizer resistance. Note: JVCC has discontinued DC-PEF12A in black and no inventory remains in that color.

    • 3M Scotch 111 Foam Mounting Squares (Permanent)

      3M Scotch 111 Permanent Foam Mounting Squares is a carded pack of 16 1 inch x 1 inch heavy-duty double-sided foam mounting squares. Used to wall-mount pictures and decorations. They adhere and conform to a variety of surfaces such as walls and ceramic tile (please note that this is a permanent tape and may cause damage if removed). Can hold up to 1 lb. of weight (use 2 squares for each half pound of weight to be held). The foam is approximately 1/16 inch thick.

    • 3M Scotch 4658F Double Coated Removable Foam Tape

      3M 4658F Double Coated Removable Foam Tape is a 31 mil acrylic foam coated on both sides with an acrylic adhesive. It offers clean removability from many surfaces including displays, signs, exhibitions, electronic accessories, smoke alarms, dispensers, air fresheners, nameplates, picture frame tabs and temporary carpet bonding. The adhesive on the tape offers high ultimate bond strength, good temperature resistance, solvent resistance and static shear holding power. As a general rule, four square inches of tape should be used for each pound of weight to be supported in static load. Comes on a 2 mil PET liner.

    • 3M Scotch 108 Foam Mounting Squares (Removable)

      3M Scotch 108 Removable Foam Mounting Squares is a carded pack of 16 1 inch x 1 inch removable double-sided foam mounting squares. They are ideal for adhering lightweight items such as posters and photos to wood, ceramic tile, gloss and semi-gloss painted walls, glass, refrigerators, and textured surfaces. Can hold up to 1 lb. of weight (use 4 squares for each half pound of weight to be held). The foam is approximately 1/16 inch thick.

    • Duck Brand Permanent Mounting Double-Sided Foam Tape

      Duck Brand Permanent Mounting Tape is a double-sided foam tape coated with a permanent adhesive on both sides. It is ideal for permanent mounting applications such as crafts, name plates, pictures, lists, pens, signs and more. Holds items up to 2 pounds strongly. Has multiple uses at home, the office, school, or in the car. It is not recommended for use on wallpaper, unfinished wood, drywall, plaster, stucco or surfaces that peel. The 60 inch and 15 ft long rolls are on a 1-1/2" diameter core and the 36 yard long roll is on a 3" diameter core. Duck Permanent Mounting Tape Directions: Clean and dry surface. Cut desired length of tape - should use 1-1/2 inches of tape length per 1/4 pound of weight. Position the exposed side of the tape on back of object, allowing for even distribution of weight. All tape must be in contact with object surface. Remove liner and press firmly into place for 30 seconds. The liner side of tape must be on the wall surface.

    • Duck Brand Removable Mounting Double-Sided Foam Tape

      Duck Brand Removable Mounting Tape is a double-sided removable foam tape that is designed to remove cleanly without leaving adhesive residue behind. It is ideal for temporary mounting applications such as photos, notes, lists, posters, decorations and other lightweight objects. It can holds up to 1 pound of weight. Duck Removable Mounting Tape Directions: Clean and dry surface. Cut desired length of tape - should use 3 inches of tape length per 1/4 pound of weight. Position the exposed side of the tape on back of object (rolled objects like posters should be flattened before mounting), allowing for even distribution of weight. All tape must be in contact with object surface. Remove liner and press firmly into place for 30 seconds. The liner side of tape must be on the wall surface. To remove, slowly peel back the tape over itself. If slight adhesive residue remains, simply remove by rolling off with finger.

    • Scapa SR532V Double Coated 1/32" Foam Tape

      Scapa SR532V Double Coated 1/32" Foam Tape is a white polyethylene foam coated on both sides with a high-performance rubber based pressure sensitive adhesive. Applications include general mounting of mirrors, signs, hooks and soap dispensers. Can also be used for gasketing, spacing and sound deadening. Benefits of the Scapa DUOFOAM SR532V Double-Sided Foam Tape include: Rubber-based adhesive provides for a good specific adhesion to a wide variety of surfaces. Its high adhesive coat weight aids in adhesion to irregular surfaces. Good quick-stick makes application easy. High shear strength gives high load bearing ability. Foam gives good thermal insulation properties. Composite die-cuts easily. This product is no longer being stocked and limited inventory now remains. Please see JVCC DC-PEF03A as a 1/32 inch thick double-sided foam alternative if ordering in less than case quantities.

    • Scapa S5169 Double Coated Black PVC Foam Tape (high density)

      Scapa S5169 Double Coated Black PVC Foam Tape is a high density black PVC foam tape coated on both sides with a high performance acrylic adhesive. Used for gasketting, anti-shatter and window glazing applications. It's acrylic adhesive forms a consistent lasting bond; it has good resistance to dilute acids/alkalis and UV; it is quick and easy to apply; and it provides a clean-edge finish. Carried on a siliconized paper liner.

    • JVCC DCBF-02 Double Coated Black PVC Foam Tape (medium density)

      JVCC DCBF-02 Double Coated Black PVC Foam Tape is a medium density black PVC foam tape coated on both sides with a high performance acrylic adhesive. Carried on a siliconized paper liner. Typically used for gasketting applications and is also a good substitute for liquid sealants since it is clean and waste-free. Good combination of flexibility and conformability with strength and wear resistance. Excellent weatherability and chemical resistance. Complies with European RoHS directive 2002/95/EC. NOTE: JVCC DCBF-02 has been discontinued by the manufacturer and only limited inventory now remains. Please see Scapa S5169 for an alternative.

    • Scapa SR508V Double Coated 1/8" Foam Tape

      Scapa SR508V Double Coated 1/8" Foam Tape is a white polyethylene foam, coated on both sides with a high-performance rubber adhesive. The product is supplied on a 60# kraft release liner. Applications for two-sided foam tape include general mounting of mirrors, nameplates, escutcheons, hooks and soap dispensers as well as mounting of reflectors and signs. Scapa SR508V can also be used for gasketing, spacing and sound deadening. Benefits of the Scapa SR508V Foam Tape include: Rubber-based adhesive provides for a good specific adhesion to a wide variety of surfaces. Its high adhesive coat weight aids in adhesion to irregular surfaces. Good quick-stick makes application easy. High shear strength gives high load bearing ability. Foam gives good thermal insulation properties. Composite die-cuts easily. NOTE: Scapa has discontinued SR508V and no inventory now remains.

    • Tyco 702208 Permanent Foam Mounting Tape

      Tyco 702208 Permanent Foam Mounting Tape is a double-sided foam tape used to mount objects where nails or screws are not desirable. Can be used on tile, glass, metal, plaster and finished wood surfaces. Each 2-inch length strip will hold approximately 1/2 pound of weight when applied to a smooth clean surface. Be sure mounting surface is free of grease, dust and wax before applying. Due to bonding strength of the adhesive, mounting tape is not recommended for use on wallpaper, plasterboard or unfinished wood as damage to these surfaces may occur upon removal. Once applied the object can not be repositioned without ruining adhesive. Foam on tape is approximately 1/16" thick. This product has been discontinued.

    • Tyco 702209 Exterior Mounting Tape

      Tyco 702209 Exterior Mounting Tape is a double-sided foam tape that has industrial quality adhesive and is weather resistant. It can be used either outdoors or indoors. Use it wherever nails or screws are not desirable. Can be used on tile, glass, plaster and finished wood surfaces. Each 2-inch length strip will hold 1/2 pound of weight. Can hold an object up to 15 pounds in weight when using multiple strips. Be sure mounting surface is free of grease, dust and wax before applying. Due to bonding strength of the adhesive, mounting tape is not recommended for use on wallpaper, plasterboard or unfinished wood as damage to these surfaces may occur upon removal. Once applied the object can not be removed without ruining adhesive. Foam on tape is approximately 1/16" thick. This product has been discontinued.

    • Tyco 702210 Removable Mounting Tape

      Tyco 702210 Removable Mounting Tape is a double-sided foam tape that stays removable for up to 2 years. Use it to hold lightweight objects such as posters, calendars, children's drawings, small pictures, etc. on a variety of surfaces including tile, glass, metal, plaster, paneling and finished wood. Each 1-inch length strip will hold 1/8 pound of weight. Can hold an object up to 6 pounds in weight when using multiple strips. Be sure mounting surface is free of grease, dust and wax before applying. Tape removes easily from most surfaces leaving no sticky residue. Foam on tape is approximately 1/16" thick. NOTE: This overstock item is now all sold out. Please see 3M 108 Removable Foam Mounting Squares as an alternative. This product has been discontinued.

Shopping Cart
Find The Best Pricing on Adhesive Tape...
The Easiest Shopping for All Brands of Tape.
BBB accredited business.
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
For all of your Adhesive Tape needsShop by CategoryAdvanced Tape FinderPrintable CatalogSearch for adhesive tapeKeyword SearchFindTape.com

Recently Viewed Products


 

Sign Up For Our Newsletter!

Sign up today to be notified of upcoming deals and exclusive offers!


Keep up to date on our latest news


Copyright ©2003-2014 FindTape.com LLC. All Rights Reserved. SSL Seal