Aluminum Foil Tape - Site Map

Tape Site Map > Aluminum Foil Tape

  • Aluminum Foil Tape is an aluminum foil carrier coated with either an acrylic or butyl rubber adhesive.
    • JVCC AF20 Aluminum Foil Tape (2 mil Linered)

      JVCC AF20 Aluminum Foil Tape is an all weather aluminum foil tape for general purpose use. It is a dead soft high tensile 2 mil thick aluminum foil coated with an aggressive acrylic adhesive system on a removable paper liner. Its malleable foil conforms well to irregular and curved surfaces; and will perform well at both low and elevated temperatures. It can also be applied at low temperatures. JVCC AF20 Foil Tape is used for vapor barrier protection, waterproof sealing, heat reflection & dissipation, masking in paint stripping and electroplating, and sealing plastic automation plateware for use in biotechnology research. The wider width 3 and 4 inch is also used to cover over and seal seams in Hexayurt shelters.

    • Nashua 330X Extreme Weather Foil Tape (1.75 mil Linered)

      Nashua 330X Extreme Weather Foil Tape is an all-weather aluminum foil tape with acrylic pressure sensitive adhesive. It is used to tape joints and seams in duct work for heating, air conditioning, and refrigeration systems. Specifically intended for use over a wide temperature range. Suitable for general repairs and a variety of insulation uses. Also as window mask to protect aircraft canopies, windshields and passenger window surfaces from cracking or hazing during paint stripping. Nashua 330X has a special adhesive system which has aggressive adhesion even at -25°F. Its aluminum foil backing is extremely conformable and its adhesive is quick stick. Low VOC (Volatile Organic Compounds) content and non-solvent for less odor. Contributes toward satisfying LEED EQ Credit 4.1 (Low Emitting Materials).

    • Nashua 360-45 Heavy Duty FoilMastic Butyl Rubber Tape

      Polyken/Nashua 360-45 Heavy Duty FoilMastic Butyl Rubber Tape is a printed, 2 mil dead-soft aluminum foil backing with a 43 mil butyl rubber mastic adhesive. It is a waterproofing repair tape used for indoor or outdoor sealing of low, medium & high pressure HVAC duct systems (includes: metal duct, fiberglass duct and flexible duct systems). It seals cracks and seams in gutters, roof alleys, eaves, hips and ridges. Seal around chimneys and vent stacks; rooftop duct systems; and leaks in vans, cars and trucks. Also used for mobile home repair. Repair gouges, rips, tears in metal panels of trailers, shipping containers and metal buildings. Use duct mastic to mend poorly sealed connections; improve indoor air quality (since fewer pollutants circulating); lower utility bills; and burn fewer fossil fuels. Features include: Permanent sealant. Provides instant water tight bond. Heavy duty all weather foil coated butyl mastic. Excellent adhesion to most surfaces. Extremely conformable. Paintable 2 mil foil backing (use in place of caulk). Non-staining adhesive. Excellent resistance to cold, heat, water, and sunlight. Release liner provides ease of installation. Acceptable for use on galvanized materials. Printed for easy identification. Low VOC content and can contribute towards satisfying EQ Credit 4.1 (Low Emitting Materials, Adhesives & Sealants) under LEED®.

    • JVCC AF22-BLK Matte Black Aluminum Foil Tape

      JVCC AF22-BLK Matte Black Aluminum Foil Tape is a matte-black non-reflective aluminum foil tape coated with a pressure-sensitive acrylic adhesive. The tape comes on a white paper release liner. The tape features a malleable foil which confirms well to irregular and curves surfaces. Its aggressive adhesive provides quick, positive grab. AF22-BLK is great for temporary light control as the tape easily confirms and adheres to light fixtures and/or barn doors. It has a mate black finish that does not reflect light, but absorbs light from ambient light sources. The tape performs well at both low and elevated temperatures and is fame retardant. It is primarily used in the entertainment industry for blocking and suppressing spills and leakages on heat generating equipment such as projectors, light cans, barndoors, and similar equipment. Lighting decorators / engineers can use it to create shadows, form barn doors and adapt gobos. Used in situations where extreme heat might otherwise burn flags or cutters,. Also used in the construction industry for joining elastomeric insulation systems. The surface to which the tape is applied should be clean, dry and free of any grease or oil. It should also be stored at 70°F / 50% relative humidity and out of direct sunlight. The photo for this product is not showing the full-length roll, but a shorter length sample.

    • Nashua 324A Cold Weather Premium Foil Tape (UL 181 A & B listed/Linered)

      Nashua 324A Cold Weather Premium Foil Tape is a cold weather, premium grade, printed aluminum foil tape (with liner) used for HVAC applications. It is recommended for use on UL listed fiberglass duct board in accordance with manufacturer's installation instructions. Ideal for permanent flexible seals. Meets UL 181 A-P standard for use as a closure material on fiberglass duct systems and UL 181 B-FX standards for use on flexible air ducts and closures. Also can provide a durable seal for dryer ventilation and on rigid sheet metal ducts. Nashua 324A benefits include: Meets UL 181 A-P & UL 181 B-FX standards. High performance aggressive acrylic adhesive. Adhesive is protected by bleached Kraft paper liner which also provides easy unwind. Excellent adhesion to duct board. Provides long-term anchorage and strong cohesive bond for long-term durability. Superior adhesion even at extremely low or high temperatures. Suitable for installation temperatures as low as -10°F. Low VOC Content and reduced environmental impact. Meets code requirements and can contribute toward requirements for EA Credit 1 (Optimize Energy Performance) and toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED®.

    • JVCC AF20-CW Cold Weather Aluminum Foil Tape (Linered)

      JVCC AF20-CW Cold Weather Aluminum Foil Tape is a cold weather, premium grade, aluminum foil tape (with liner) used for HVAC applications. It is recommended for use on fiberglass duct boards. Ideal for permanent flexible seals. For use as a closure material on fiberglass duct systems and on flexible air ducts and closures. Also can provide a durable seal for dryer ventilation and on rigid sheet metal ducts. The tape is coated with a high performance aggressive acrylic adhesive which is protected by bleached Kraft paper liner which also provides easy unwind. The adhesive is good even at extremely low or high temperatures.

    • Nashua 360-17 FoilMastic Butyl Rubber Tape

      Polyken/Nashua 360-17 FoilMastic Butyl Rubber Tape is a printed, 2 mil dead-soft aluminum foil backing with a 15 mil butyl rubber mastic adhesive. It is a waterproofing repair tape used for indoor or outdoor sealing of low, medium & high pressure HVAC duct systems (includes: metal duct, fiberglass duct and flexible duct systems). It seals cracks and seams in gutters, roof alleys, eaves, hips and ridges. Seal around chimneys and vent stacks. Repair gouges, rips, tears in metal panels of trailers, shipping containers and metal buildings. Also used to seal leaks in vans, cars, and trucks and for mobile home repair. Use duct mastic to mend poorly sealed connections; improve indoor air quality (since fewer pollutants circulating); lower utility bills; and burn fewer fossil fuels. SMACNA A, B, and C Seal Classes. UL 723 classified. Low VOC content and can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED®. Features include: Permanent sealant. Provides instant water tight bond. Acceptable for use on galvanized materials. Heavy duty all weather foil coated butyl mastic. Excellent adhesion to all surfaces. Extremely conformable. Non-staining adhesive. Paintable 2 mil foil backing (use in place of caulk). Excellent resistance to cold, heat, water, and sunlight. Printed for easy identification. Release liner provides ease of installation. We label the tape as Polyken/Nashua 360-17 in the product description because they are co-brands owned by Berry Plastics (the parent company of Nashua, Polyken, Ludlow, Patco, etc. tape brands). The core of the tape can be labelled as either Polyken or Nashua depending on the runs we get the cut rolls from.

    • Polyken 345 Premium Self-Wound Aluminum Foil Tape (UL / FAR certified)

      Polyken 345 Premium Self-Wound Aluminum Foil Tape is a heavy-duty dead soft aluminum foil tape used for sealing and masking of aircraft. It provides a barrier to air, moisture and corrosion and it acts as a heat shield to minimize heat transfer. Polyken 345SW features a self wound construction so it has a smooth and easy unwind and no release liner minimizes waste. It is conformable for irregular surfaces and contours and provides an excellent bond to most surfaces. The acrylic adhesive coating on the tape is solvent resistant and has excellent high temperature performance. It also provides clean and easy removal with no residue from most surfaces. Other application uses include: speed tape; window mask to protect aircraft canopies, windshields, and passenger window surfaces from crazing or hazing during paint stripping operations; heavy duty vapor barrier sealing for sheet metal, flexible, and fiberglass duct systems; insulation seal, patch, and repair; composite repair and manufacturing; masking tape in paint stripping and electro-plating applications; heat shielding and elimination of 'hot' spots in industrial maintenance applications; condenser and evaporator fastener in the appliance and refrigeration industry; diversion trough for wash-off of paints and chemicals during stripping and painting process.

    • Shurtape AF-100 Aluminum Foil Tape (UL 181 A & B listed/Linered)

      Shurtape AF-100 Aluminum Foil Tape is a 2 mil aluminum foil with an acrylic adhesive used in the HVAC industry for joining and sealing fiberglass duct board and Class 1 Flex Duct. It provides an air-tight seal and meets UL 181 A-P standard for use as a closure material on fiberglass duct systems and UL 181 B-FX standards for use on flexible air ducts and closures. Shurtape AF-100 benefits include: Provides air-tight bond. Has excellent adhesion. Its flexible and easy to use. Has superior stability during extreme fluctuations in temperature. It resists water vapor and other HVAC duct contaminations. Has static shear on high/low temperatures in excess of six hours.

    • JVCC AF-GC-5 Aluminum Foil / Glass Cloth Tape

      JVCC AL-GC-5 Aluminum Foil / Glass Cloth Tape is a thin tape that combines glass cloth with a laminate of aluminum foil. It provides high strength and reflectivity with excellent flexibility. The fiberglass cloth side is coated with a transparent, high temperature resistant silicone adhesive. This product will withstand moderate grit blasting, is non-corrosive, and flame retardant (will not burn under open flame / extreme temperature exposure). This aluminum foil fiberglass cloth tape can be used as a masking tape in plasma spray applications, seaming and repair of heat and flame barrier curtains, securing thermal insulation on heating and ventilation ducts, protecting and shielding various missile and aircraft components such as control cables, harnesses and fuel lines. It prevents build-up of liquid metal on surfaces that must be protected. Image does not show a full 36 yard roll.

    • Shurtape AF-075 Aluminum Foil Tape (3 mil Linerless)

      Shurtape AF-075 Aluminum Foil Tape is a 3 mil dead-soft linerless aluminum foil tape which is designed to resist extreme temperature fluctuations. It adhere to its own backing and also particularly well on irregular surfaces. Used to create vapor barriers and waterproof seals; to reflect and dissipate heat; and for masking off areas when painting and electroplating. The tape is coated with an acrylic adhesive and meets the L-T-80B; SAE-AMS-T-23397 (replaced MIL-T-23397B - canceled 9/21/98) standards. Please note AF-075 ships on a plain white core (not Shurtape-branded).

    • JVCC AF12 Economy Aluminum Foil Tape (1.2 mil Linered)

      JVCC AF12 Economy Aluminum Foil Tape is an economical aluminum foil tape for moderate demand applications. It is a 1.2 mil dead soft aluminum foil coated with a solvent based acrylic adhesive. Comes on a removable release liner. The malleable foil conforms well to irregular surfaces and is used for vapor barrier protection, waterproof sealing, heat reflection & dissipation, masking in paint stripping, and electroplating.

    • ISC RTAF High Heat Aluminum Foil Tape

      ISC RTAF High Heat Aluminum Foil Tape is a high heat foil protection tape can be used to protect anything from temperature extremes. Conformable foil backing makes it easy to use in those tough areas. Protect plastic on snowmobiles or motorcycles from aftermarket pipe installation. Cover up those wheel weights on race cars and match the chrome. Easy peel and stick adhesive. Maximum temperature uses are: -35°F to 300°F. Not to be used on direct contact of exhaust. Aluminum / Chrome color only.

    • Nashua 322 General Purpose Foil Tape (2 mil Linered)

      Nashua 322 General Purpose Foil Tape has a 2 mil thick aluminum foil backing and is specially designed for taping joints and seams against moisture and vapor on foil jacketing insulation. Appropriate for a variety of insulation uses. Also used in the automotive industry for general repair. The tape has excellent conformability to curved surfaces like corners and joints and has excellent quick stick adhesion. Our converter received in a few cases of this tape in in this shorter 40 yard length (instead of 50 yard) and have marked it down temporarily to this sale pricing.

    • Nashua 361-11 Waterproofing Repair Tape

      Polyken/Nashua 361-11 Waterproofing Repair Tape is a tape with an aluminum foil backing/carrier which is coated on one side with a permanent butyl rubber adhesive. The tape forms a permanent seal with excellent adhesion to all surfaces. Nashua 361-11 is also extremely conformable and resistant to cold, heat, water, and sunlight. Its silver foil backing is paintable which helps match surfaces. Typically used for indoor & outdoor sealing and repair of gutters, roof alleys, eaves, hips and ridges. Can also repair seams and seal leaks, rips, and tears in pipes, hoses and in metal panels of trailers, shipping containers, and metal buildings. We label the tape as Polyken/Nashua 361-11 in the product description because they are co-brands owned by Berry Plastics (the parent company of Nashua, Polyken, Ludlow, Patco, etc. tape brands). The core of the tape can be labelled as either Polyken or Nashua depending on the runs we get the cut rolls from.

    • Shurtape SF-685 Shurflex Indoor/Outdoor Mastic On A Roll

      Shurtape SF-685 Shurflex Indoor/Outdoor Mastic On a Roll is used for air-tight and moisture-free sealing of rigid and flexible air duct systems. Used primarily to seal sheet metal duct in both indoor and outdoor applications and used as a permanent, water resistant sealer. Use duct mastic to mend poorly sealed connections; improve indoor air quality (since fewer pollutants circulating); lower utility bills; and burn fewer fossil fuels. UL 723 classified. Features include: Waterproof backing. Stays supple and forms a permanent bond to substrate. Aluminum foil backing may be painted with any paint recommended for aluminum. Contains no asbestos, CFCs or PCBs. NOTE: To purchase 2-inch or 3-inch butyl rubber mastic in single roll quantities without any minimums please see Nashua 360-17.

    • JVCC AF30-SW Aluminum Foil Tape (3 mil Linerless)

      JVCC AF30-SW Aluminum Foil Tape is a 3 mil high strength self-wound dead soft aluminum foil coated with an aggressive acrylic adhesive system used to create superior bonds. Designed to stick firmly to its own backing. Malleable foil conforms well to irregular surfaces. Used for waterproofing, vapor barrier and air leakage protection, metal patching and sound dampening, as a sealing system in refrigerated appliances and microwave ovens. High reflectivity assures effective heat, light interference, and electrical isolation shielding. Excellent protection for masking in paint stripping and electroplating. 3 mil foil protects outdoor cable splices. Can be applied at low temperatures. UL723.

    • JVCC AF30 High Performance Aluminum Foil Tape (3 mil Linered)

      JVCC AF30 High Performance Aluminum Foil Tape is a 3 mil high strength dead soft aluminum foil coated with an aggressive solvent based acrylic adhesive. Comes on an easily removable paper liner. Malleable foil conforms well to irregular and curved surfaces. Excellent performance at both low and high temperatures (can also be applied at low temperatures). Used for waterproof sealing, vapor barrier and air leakage protection, heat reflection/dissipation, and masking in paint stripping and electroplating. Excellent for die cutting.

    • JVCC AF50 Aluminum Foil Tape (5 mil Linered)

      JVCC AF50 Aluminum Foil Tape has a 5 mil high tensile strength aluminum foil backing combined with a high performance solvent acrylic adhesive. The tape's aluminum carrier provides an excellent reflection of both heat and light. Its high quality adhesive has strong adhesion and holding power. The tape is used in the HVAC industry for joining and sealing FSK (Foil-Scrim-Kraft) facing laminated fiberglass blanket/duct board joints and seams. It is also used to join and seal flexible air duct seams and connections and may be used for other industrial uses requiring a tape with these characteristics and benefits. The tape's aluminum backing is protected by an easy-release silicone paper release liner.

    • JVCC AF20-SW Aluminum Foil Tape (2 mil Linerless)

      JVCC AF20-SW Aluminum Foil Tape is a 2 mil self wound dead soft malleable aluminum foil coated with acrylic adhesive. Malleable foil conforms well to irregular surfaces. Excellent harness wrap tape. Designed for non-critical applications such as sealing out dust and moisture, masking and duct sealing. Can be used for heat reflection in the appliance industry and as a mask for electroplating and paint stripping. This linerless product saves time and labor since a liner doesn't have to be removed to apply it and it produces less waste.

    • JVCC AF20-FR Aluminum Foil Tape (2 mil Flame Retardant/Linered)

      JVCC AF20-FR Aluminum Foil Tape is an aluminum foil backed tape combined with a high flame-retardant acrylic adhesive. It comes on a removable paper release liner and its core is UL printed. Its high quality flame-resistance adhesive has extremely aggressive adhesion and holding power which offers reliable and durable Foil-Scrim-Kraft facing joints and seams sealing in HVAC ductwork application. Malleable foil conforms well to irregular & curved surfaces and provides excellent reflection of both heat & light. Excellent vapor barrier due to the low moisture vapor transmission rate. NOTE: JVCC has discontinued this product and no inventory now remains.

Shopping Cart
Find The Best Pricing on Adhesive Tape...
The Easiest Shopping for All Brands of Tape.
BBB accredited business.
McAfee Secure Tested Site
For all of your Adhesive Tape needsShop by CategoryAdvanced Tape FinderPrintable CatalogSearch for adhesive tapeKeyword SearchFindTape.com

Recently Viewed Products


 

Sign Up For Our Newsletter!

Sign up today to be notified of upcoming deals and exclusive offers!


Keep up to date on our latest news


Copyright ©2003-2014 FindTape.com LLC. All Rights Reserved. SSL Seal