Scapa SR532V Double Coated 1/32" Foam Tape is a white polyethylene foam coated on both sides with a high-performance rubber based pressure sensitive adhesive. Applications include general mounting of mirrors, signs, hooks and soap dispensers. Can also be used for gasketing, spacing and sound deadening.
Benefits of the Scapa DUOFOAM SR532V Double-Sided Foam Tape include:
- Rubber-based adhesive provides for a good specific adhesion to a wide variety of surfaces.
- Its high adhesive coat weight aids in adhesion to irregular surfaces.
- Good quick-stick makes application easy.
- High shear strength gives high load bearing ability.
- Foam gives good thermal insulation properties.
- Composite die-cuts easily.
This product is no longer being stocked and limited inventory now remains. Please see JVCC DC-PEF03A as a 1/32 inch thick double-sided foam alternative if ordering in less than case quantities.
|
Scapa SR532V Double Coated 1/32" Foam Tape Specifications- Adhesive: rubber How are adhesives different?
- Carrier/Backing: polyethylene foam
- Release Liner: 60# kraft paper
- Thickness: 38.7 mils (carrier, adhesive, liner) 35.2 mils (carrier, adhesive) 4 mils (adhesive) 31.2 mils (carrier) 3.5 mils (liner) What is a mil?
- Adhesion: 115 ounces per inch (to stainless steel)
- Application Temperature: 65°F (minimum)
- Holding Power: 4.4 psi (1/2in x 1in x 1000g)
- Core: 3" diameter
* specifications are those given by manufacturers and are not tested for accuracy |
Custom widths may be available
This tape often comes to us as full log rolls (not pre-cut) so it may be possible to cut the tape to a width not shown in the pricing table below. Also note that since this tape comes in log roll format most rolls will ship on a plain white core. Please use the 'Contact Us' page to inquire about a price and any minimum requirements for this tape in a custom width.
|
|
|
| 1/32 in. thick foam x 1 in. x 72 yds. | SR532V/0031 | 12 | SINGLE ROLL (1 to 12 rolls) 1 TO 2 CASES(12 to 35 rolls) 3 TO 5 CASES(36 to 71 rolls) 6+ CASES(>= 72 rolls) | $22.12 $19.23 $18.60 $17.69 | * see individual roll price to left $230.76 $223.20 $212.28 |
|---|
|
1/32 in. thick foam x 1/2 in. x 72 yds.
* typically takes approximately 4 extra business days to ship | SR532V/00305 | 24 | SINGLE ROLL (1 to 24 rolls) 1 TO 2 CASES(24, 48 rolls) 3 TO 5 CASES(72, 96, 120 rolls) 6+ CASES(144, 168, 192, ... rolls) | * 1 case
minimum required $9.83 $9.51 $9.04 |
$235.92 $228.24 $216.96 |
|---|
1/32 in. thick foam x 3/4 in. x 72 yds.
* typically takes approximately 4 extra business days to ship | SR532V/003075 | 16 | SINGLE ROLL (1 to 16 rolls) 1 TO 2 CASES(16, 32 rolls) 3 TO 5 CASES(48, 64, 80 rolls) 6+ CASES(96, 112, 128, ... rolls) | * 1 case
minimum required $14.51 $14.03 $13.36 |
$232.16 $224.48 $213.76 |
|---|
1/32 in. thick foam x 1-1/2 in. x 72 yds.
* typically takes approximately 4 extra business days to ship | SR532V/00315 | 8 | SINGLE ROLL (1 to 8 rolls) 1 TO 2 CASES(8, 16 rolls) 3 TO 5 CASES(24, 32, 40 rolls) 6+ CASES(48, 56, 64, ... rolls) | * 1 case
minimum required $28.62 $27.68 $26.32 |
$228.96 $221.44 $210.56 |
|---|
1/32 in. thick foam x 2 in. x 72 yds.
* typically takes approximately 4 extra business days to ship | SR532V/0032 | 6 | SINGLE ROLL (1 to 6 rolls) 1 TO 2 CASES(6, 12 rolls) 3 TO 5 CASES(18, 24, 30 rolls) 6+ CASES(36, 42, 48, ... rolls) | * 1 case
minimum required $38.02 $36.77 $34.97 |
$228.12 $220.62 $209.82 |
|---|
** special order sizes are not returnable (and non-cancelable if material has been ordered or cut before the cancellation request was made)
** special order sizes for this item typically ship direct from our supplier so will not ship together with stocked products
** minimum requirements are due to the fact that the product size is non-stock or special setup is required to cut to that width
** if a particular size has a minimum item requirement please only purchase that size in multiples of that minimum, e.g. if the minimum is 12 then purchase as 12, 24, 36, etc.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
1 mil = 1/1000 of an inchExamples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
