See also
Electrical Tapes
Tapes for Scrapbooking
'ISC Helicopter-IG' is out of stock and not currently available for purchase on the site.
ISC Helicopter-IG Surface Guard Tape [Indoor Grade]

ISC Helicopter-IG Surface Guard Tape [Indoor Grade]

Product Description

ISC Helicopter-IG Surface Guard Tape (Indoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge wing tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or two outdoor grade options. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. The tape is clear/transparent and is supplied on a white paper release liner.

Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will.

Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job.

Features & Benefits

  • Super tough film requires razor knife or scissors for cutting.
  • Supplied on 92 lb. easy release polycoated liner.
  • Requires no heat or solvent to activate.


Technical Information

ISC Helicopter-IG Surface Guard Tape
  • Adhesive: rubber   How are adhesives different?
  • Carrier/Backing: polyurethane film
  • Release Liner: 92 lb. polycoated white paper
  • Thickness: 9 mils (carrier, adhesive)    What is mil thickness?
  • Adhesion: 40 ounces per inch (to stainless steel)
  • Tensile Strength: 48 pounds per inch (longitudinal)
  • Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.

AlertRoll Sizes/Widths:

Please note that tape rolls are NOT guaranteed to be splice- free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).

Download Datasheets

Download Datasheets

The following downloads are available for this product:

Download Example Application Instructions
ISC Helicopter-IG Surface Guard Tape [Indoor Grade]
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Continue Shopping View Shopping Cart