JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape

JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape is a 20 mil SPVC pipe wrap/surface protection tape that is highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. Provides electrical protection. Protects pipe joints and conduit couplings for overhead or direct buried applications. Designed to be wrapped around itself on a pipe. Bacteria, fungus and abrasion resistant. Flame retardant.

Permacel #P-320; Achem #PW20

* alternative to is not the same as equivalent to so please ensure the specifications listed are suitable for your application

JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape Specifications

Adhesive: synthetic rubber How are adhesives different?
Carrier/Backing: soft polyvinyl chloride (SPVC) film
Thickness: 20 mils (carrier, adhesive) What is a mil?
Adhesion: 11 ounces per inch (to stainless steel)
Tensile Strength: 32 pounds per inch (longitudinal)
Dielectric Strength: 1000 volts
Application Temperature: 32°F
Service/Operating Temperature: up to 176°F
Elongation: 360%
Water absorption rate: 0.290 maximum (25°C, 24 hours)
Core: 3" diameter neutral

* specifications are those given by manufacturers and are not tested for accuracy

Custom widths may be available

This tape often comes to us as full log rolls (not pre-cut) so it may be possible to cut the tape to a width not shown in the pricing table below. Also note that since this tape comes in log roll format most rolls will ship on a plain white core. Please use the 'Contact Us' page to inquire about a price and any minimum requirements for this tape in a custom width.

Shurtape PW-100 Corrosion Protection Pipe Wrap Tape

JVCC PWT-10C Economy Corrosion Control Pipe Wrap Tape

JVCC PWT-10C-SC Economy Corrosion Control Pipe Wrap Tape (Small Core)

JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape

Quantity:

Roll(s) Case(s) Rolls or Cases?

Color:

Black

Roll Size: **

this item's most popular option: 2 in. x 100 ft. (Black) see table below for additional sizes

Price per item will display once
the above selections are made.

** Adhesive tape products are NOT guaranteed to be splice-free. Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). Please contact us to inquire about pricing for full-cut widths; e.g. a 6 inch roll cut to 152mm instead of 144mm.

Go back to Ordering Options form

ROLL SIZE	ITEM #	ROLLS IN A CASE	PRICING SCHEDULE
QUANTITY	PRICE PER ROLL	PRICE PER FULL CASE
2 in. x 100 ft. Actual Size: 50mm wide	PWT-20C/2100	24	SINGLE ROLL (1 to 24 rolls) 1 TO 5 CASES (24 to 143 rolls) 6 TO 11 CASES (144 to 287 rolls) 12+ CASES (>= 288 rolls)	$9.74 $8.06 $7.85 $7.37	* see individual roll price to left $193.44 $188.40 $176.88
4 in. x 100 ft. Actual Size: 100mm wide	PWT-20C/4100	12	SINGLE ROLL (1 to 12 rolls) 1 TO 5 CASES (12 to 71 rolls) 6 TO 11 CASES (72 to 143 rolls) 12+ CASES (>= 144 rolls)	$18.72 $16.02 $15.63 $14.62	* see individual roll price to left $192.24 $187.56 $175.44

ROLL SIZE

ITEM #

ROLLS IN A CASE

PRICING SCHEDULE

QUANTITY

PRICE PER ROLL

PRICE PER FULL CASE

2 in. x 100 ft.
Actual Size: 50mm wide

PWT-20C/2100

SINGLE ROLL

(1 to 24 rolls)

1 TO 5 CASES

(24 to 143 rolls)

6 TO 11 CASES

(144 to 287 rolls)

12+ CASES

(>= 288 rolls)

$9.74

$8.06

$7.85

$7.37

* see individual roll price to left

$193.44

$188.40

$176.88

4 in. x 100 ft.
Actual Size: 100mm wide

PWT-20C/4100

SINGLE ROLL

(1 to 12 rolls)

1 TO 5 CASES

(12 to 71 rolls)

6 TO 11 CASES

(72 to 143 rolls)

12+ CASES

(>= 144 rolls)

$18.72

$16.02

$15.63

$14.62

* see individual roll price to left

$192.24

$187.56

$175.44

Go back to Ordering Options form

WHAT DO CUSTOMERS BUY WHO VIEW THIS ITEM

27% instead buy

Pro Tapes Pro-Gaff Gaffers Tape

27% instead buy

JVCC EL7566-AW Premium Grade Electrical Tape

18% instead buy

JVCC PWT-10C Economy Corrosion Control Pipe Wrap Tape

18% buy this item

JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape

9% instead buy

JVCC GAFF30YD Premium Grade 30 Yard Gaffers Tape

CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT THESE AT THE SAME TIME

JVCC E-Tape Colored Electrical Tape

JVCC PWT-10C Economy Corrosion Control Pipe Wrap Tape

JVCC PATRIOT-1 Utility Grade Duct Tape

3M Scotch Super 33+ Vinyl Electrical Tape

JVCC EL7566-AW Premium Grade Electrical Tape

PRODUCT REVIEWS

Go back to Ordering Options form

hot melt rubber (synthetic)

Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).

natural rubber

Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.

acrylic

Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.

silicone

Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.

zinc oxide

Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.