JVCC DC-1109R/P Double Coated Removable/Permanent Tape is a clear polyester film differentially coated with a removable (low tack) and permanent (high tack) synthetic rubber adhesive system. The liner side (the tape exposed once you remove the liner) is coated with a controlled low tack, highly removable clear adhesive system which exhibits moderate adhesion to a variety of surfaces, but has excellent removability. The exposed side (the tape visible once you unwind it from the roll) is coated with an aggressive, high tack, clear synthetic copolymer adhesive which forms a long-term bond immediately upon contact.
JVCC DC-1109R/P double-sided removable/permanent tape complies with the FDA Code of Regulations Title 21, Part 175, Subpart B, Section 175.105 which covers the use of adhesive tapes for indirect food contact.
NOTE: this tape is no longer being manufactured, and limited inventory remains. Replacement tapes include JVCC DC-4110R/P and Scapa S305.
Int'l Tape #550; Venture #523; 3M #9415; Scapa #S-305
* alternative to is not the same as equivalent to so please ensure the specifications listed are suitable for your application
|
JVCC DC-1109R/P Double Coated Removable/Permanent Tape (Rubber Adhesive) specifications:- Adhesive: synthetic rubber How are adhesives different?
- Carrier/Backing: polyester film
- Release Liner: siliconized paper
- Thickness: 6 mils (including liner) 3 mils (without liner) 0.5 mils (carrier/backing) 3 mils (liner) What is a mil?
- Adhesion: 80 ounces per inch (exposed side) / 10 ounces per inch (liner side)
- Tensile Strength: 10 pounds per inch (longitudinal)
- Application Temperature: 60°F to 120°F
- Service/Operating Temperature: 0°F to 150°F
- Elongation: 50%
- Certifications: FDA Title 21 Part 175 Subpart B Section 175.105
- Core: 3" diameter neutral
* specifications are those given by manufacturers and are not tested for accuracy |
Custom widths may be available
This tape often comes to us as full log rolls (not pre-cut) so it may be possible to cut the tape to a width not shown in the pricing table below. Also note that since this tape comes in log roll format most rolls will ship on a plain white core. Please use the 'Contact Us' page to inquire about a price and any minimum requirements for this tape in a custom width.
|
|
3/8 in. x 60 yds.
Actual Size: 9mm x 55m | DC-1109R/P/03860 | 96 | SINGLE ROLL (< 96 rolls) 1 TO 2 CASES(96 to 287 rolls) 3 TO 9 CASES(288 to 959 rolls) 10+ CASES(>= 960 rolls) | $4.02 $3.00 $2.93 $2.83 | * see individual roll price to left $288.00 $281.28 $271.68 |
|---|
1/2 in. x 60 yds.
Actual Size: 12mm x 55m | DC-1109R/P/0560 | 72 | SINGLE ROLL (< 72 rolls) 1 TO 2 CASES(72 to 215 rolls) 3 TO 9 CASES(216 to 719 rolls) 10+ CASES(>= 720 rolls) | $5.13 $3.99 $3.89 $3.76 | * see individual roll price to left $287.28 $280.08 $270.72 |
|---|
3/4 in. x 60 yds.
Actual Size: 18mm x 55m | DC-1109R/P/07560 | 48 | SINGLE ROLL (< 48 rolls) 1 TO 2 CASES(48 to 143 rolls) 3 TO 9 CASES(144 to 479 rolls) 10+ CASES(>= 480 rolls) | $7.20 $5.84 $5.70 $5.51 | * see individual roll price to left $280.32 $273.60 $264.48 |
|---|
1 in. x 60 yds.
Actual Size: 24mm x 55m | DC-1109R/P/160 | 36 | SINGLE ROLL (< 36 rolls) 1 TO 2 CASES(36 to 107 rolls) 3 TO 9 CASES(108 to 359 rolls) 10+ CASES(>= 360 rolls) | $9.27 $7.71 $7.52 $7.26 | * see individual roll price to left $277.56 $270.72 $261.36 |
|---|
1-1/2 in. x 60 yds.
Actual Size: 36mm x 55m | DC-1109R/P/1560 | 32 | SINGLE ROLL (< 32 rolls) 1 TO 2 CASES(32 to 95 rolls) 3 TO 9 CASES(96 to 319 rolls) 10+ CASES(>= 320 rolls) | $13.39 $11.40 $11.12 $10.74 | * see individual roll price to left $364.80 $355.84 $343.68 |
|---|
2 in. x 60 yds.
Actual Size: 48mm x 55m | DC-1109R/P/260 | 24 | SINGLE ROLL (< 24 rolls) 1 TO 2 CASES(24 to 71 rolls) 3 TO 9 CASES(72 to 239 rolls) 10+ CASES(>= 240 rolls) | $17.55 $15.13 $14.75 $14.25 | * see individual roll price to left $363.12 $354.00 $342.00 |
|---|
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
1 mil = 1/1000 of an inchExamples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
