Polyken 226 Nuclear Grade Duct Tape is a polyethylene coated cloth tape meeting nuclear regulations. The tape has multiple uses in power plants and ships; specifically for use with nickel-based alloys and austenitic stainless steels. Also for holding dosimeters; securing clothing and gloves; wrapping pipe ends; insulation & duct sealing; and color coding and packaging. Features of Polyken 226 include: high tensile strength for difficult applications; puncture & abrasion resistance; crisp, straight tear; moisture, solvent & abrasion resistant; and aggressive adhesion to all surfaces. Meets NRC and ANSI regulations. The tape has low VOC content and can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED®.
|
Polyken 226 Nuclear Grade Duct Tape Specifications- Adhesive: rubber How are adhesives different?
- Carrier/Backing: polyethylene coated cloth
- Thickness: 12 mils (carrier, adhesive) What is a mil?
- Adhesion: 50 ounces per inch (to stainless steel)
- Adhesion to Backing: 25 ounces per inch
- Tensile Strength: 30 pounds per inch (longitudinal)
- Service/Operating Temperature: 40°F to 200°F
- Certifications: NRC Reg 1.38; ASME NQA-1 (replaces ANSI No. 45.2.2); UL723; LEED EQ Credit 4.1
- Core: 3" diameter
* specifications are those given by manufacturers and are not tested for accuracy |
|
|
2 in. x 60 yds.
Actual Size: 48mm x 55m | 226/260 | 24 | SINGLE ROLL (1 to 24 rolls) 1 TO 4 CASES(24 to 119 rolls) 5 TO 9 CASES(120 to 239 rolls) 10+ CASES(>= 240 rolls) | $20.64 $17.66 $17.06 $16.78 | * see individual roll price to left $423.84 $409.44 $402.72 |
|---|
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
1 mil = 1/1000 of an inchExamples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
