JVCC PTFE-GC-3 Teflon Glass Cloth Tape is a 2.8 mil Teflon™ (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
3M #5451; DeWal #134-3; St. Gobain #SG25-03; Greenbelt #100-3S; W.F.Lake #L40S-3; Taconic #6085-03; Chemfab #350-3S; Lanmar #635-3; AFC #25003S
* alternative to is not the same as equivalent to so please ensure the specifications listed are suitable for your application
|
JVCC PTFE-GC-3 Teflon Glass Cloth Tape (2.8 mil) Specifications- Adhesive: silicone How are adhesives different?
- Carrier/Backing: polytetrafluoroethylene (PTFE) Teflon impregnated fiberglass cloth
- Release Liner: paper (optional)
- Thickness: 5 mils (carrier, adhesive) 2.8 mils (carrier) What is a mil?
- Adhesion: 43 ounces per inch (to stainless steel)
- Tensile Strength: 100 pounds per inch (longitudinal)
- Dielectric Strength: 5100 volts
- Service/Operating Temperature: -100°F to 500°F
- Elongation: 3.4%
- Breaking Strength, Warp/fill: 100/50 pounds per inch
- Elongation, Warp/fill: 2.5%/2.3%
- Core: 3" diameter
* specifications are those given by manufacturers and are not tested for accuracy |
Custom widths may be available
This tape often comes to us as full log rolls (not pre-cut) so it may be possible to cut the tape to a width not shown in the pricing table below. Also note that since this tape comes in log roll format most rolls will ship on a plain white core. Please use the 'Contact Us' page to inquire about a price and any minimum requirements for this tape in a custom width.
|
|
|
1/2 in. x 36 yds.
Actual Size: 12.7mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/0536 | 24 | SINGLE ROLL (1 to 11 rolls) ½ CASE(12 rolls) 1 TO 2 CASES(24, 48 rolls) 3+ CASES(72, 96, 120, ... rolls) | $19.99 *3 item minimum required $18.58 $17.82 $16.33 | * see individual roll price to left * see individual roll price to left $427.68 $391.92 |
|---|
3/4 in. x 36 yds.
Actual Size: 19.0mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/07536 | 16 | SINGLE ROLL (1 to 7 rolls) ½ CASE(8 rolls) 1 TO 2 CASES(16, 32 rolls) 3+ CASES(48, 64, 80, ... rolls) | $29.84 *2 item minimum required $27.59 $26.61 $24.40 | * see individual roll price to left * see individual roll price to left $425.76 $390.40 |
|---|
1 in. x 36 yds.
Actual Size: 25.4mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/136 | 12 | SINGLE ROLL (1 to 5 rolls) ½ CASE(6 rolls) 1 TO 2 CASES(12, 24 rolls) 3+ CASES(36, 48, 60, ... rolls) | $38.81 *2 item minimum required $35.78 $34.60 $32.52 | * see individual roll price to left * see individual roll price to left $415.20 $390.24 |
|---|
1-1/2 in. x 36 yds.
Actual Size: 38.1mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/1536 | 8 | SINGLE ROLL (1 to 3 rolls) ½ CASE(4 rolls) 1 TO 2 CASES(8, 16 rolls) 3+ CASES(24, 32, 40, ... rolls) | $56.45 $51.91 $50.32 $48.52 | * see individual roll price to left * see individual roll price to left $402.56 $388.16 |
|---|
2 in. x 36 yds.
Actual Size: 50.8mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/236 | 6 | SINGLE ROLL (1 to 2 rolls) ½ CASE(3 rolls) 1 TO 2 CASES(6, 12 rolls) 3+ CASES(18, 24, 30, ... rolls) | $74.09 $68.04 $66.05 $64.51 | * see individual roll price to left * see individual roll price to left $396.30 $387.06 |
|---|
3 in. x 36 yds.
Actual Size: 76.2mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/336 | 4 | SINGLE ROLL (1 to 1 rolls) ½ CASE(2 rolls) 1 TO 2 CASES(4, 8 rolls) 3+ CASES(12, 16, 20, ... rolls) | $109.30 $100.22 $97.43 $96.43 | * see individual roll price to left * see individual roll price to left $389.72 $385.72 |
|---|
4 in. x 36 yds.
Actual Size: 101.6mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/436 | 4 | SINGLE ROLL (1 to 1 rolls) ½ CASE(2 rolls) 1 TO 2 CASES(4, 8 rolls) 3+ CASES(12, 16, 20, ... rolls) | $145.24 $133.09 $129.47 $129.02 | * see individual roll price to left * see individual roll price to left $517.88 $516.08 |
|---|
6 in. x 36 yds.
Actual Size: 152.4mm wide
* typically takes approximately 3 extra business days to ship | PTFE-GC-3/636 | 2 | SINGLE ROLL (1 to 1 rolls) ½ CASE(1 rolls) 1 TO 2 CASES(2, 4 rolls) 3+ CASES(6, 8, 10, ... rolls) | $215.65 $197.46 $192.23 $192.13 | * see individual roll price to left * see individual roll price to left $384.46 $384.26 |
|---|
** special order sizes are not returnable (and non-cancelable if material has been ordered or cut before the cancellation request was made)
** special order sizes for this item typically ship direct from our supplier so will not ship together with stocked products
** minimum requirements are due to the fact that the product size is non-stock or special setup is required to cut to that width
** if a particular size has a minimum item requirement please only purchase that size in multiples of that minimum, e.g. if the minimum is 12 then purchase as 12, 24, 36, etc.
WHAT DO CUSTOMERS BUY WHO VIEW THIS ITEM  |
|
| CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT THESE AT THE SAME TIME |
|
PRODUCT REVIEWS
|
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
1 mil = 1/1000 of an inchExamples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils