JVCC AF50 Aluminum Foil Tape has a 5 mil high tensile strength aluminum foil backing combined with a high performance solvent acrylic adhesive. The tape's aluminum carrier provides an excellent reflection of both heat and light. Its high quality adhesive has strong adhesion and holding power. The tape is used in the HVAC industry for joining and sealing FSK (Foil-Scrim-Kraft) facing laminated fiberglass blanket/duct board joints and seams. It is also used to join and seal flexible air duct seams and connections and may be used for other industrial uses requiring a tape with these characteristics and benefits. The tape's aluminum backing is protected by an easy-release silicone paper release liner.
|
JVCC AF50 Aluminum Foil Tape (5 mil Linered) Specifications- Adhesive: solvent-based acrylic How are adhesives different?
- Carrier/Backing: aluminum foil
- Release Liner: paper
- Thickness: 6.8 mils (carrier, adhesive) 1.8 mils (adhesive) 5 mils (carrier) What is a mil?
- Adhesion: 65 ounces per inch (to stainless steel)
- Application Temperature: 50°F to 105°F
- Service/Operating Temperature: -4°F to 230°F
- Holding Power: 1,200+ minutes
- Rolling Tack (11mm ball): <= 8.0 inch
- Core: 3" diameter neutral
* specifications are those given by manufacturers and are not tested for accuracy |
Custom widths may be available
This tape often comes to us as full log rolls (not pre-cut) so it may be possible to cut the tape to a width not shown in the pricing table below. Also note that since this tape comes in log roll format most rolls will ship on a plain white core. Please use the 'Contact Us' page to inquire about a price and any minimum requirements for this tape in a custom width.
|
|
|
1/2 in. x 60 yds.
Actual Size: 12mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/0560 | 96 | SINGLE ROLL (1 to 95 rolls) 1 TO 2 CASES(96, 192 rolls) 3 TO 5 CASES(288, 384, 480 rolls) 6+ CASES(576, 672, 768, ... rolls) | * 1 case
minimum required $5.03 $4.91 $4.52 |
$482.88 $471.36 $433.92 |
|---|
3/4 in. x 60 yds.
Actual Size: 18mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/07560 | 64 | SINGLE ROLL (1 to 63 rolls) 1 TO 2 CASES(64, 128 rolls) 3 TO 5 CASES(192, 256, 320 rolls) 6+ CASES(384, 448, 512, ... rolls) | * 1 case
minimum required $7.26 $7.08 $6.52 |
$464.64 $453.12 $417.28 |
|---|
1 in. x 60 yds.
Actual Size: 24mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/160 | 48 | SINGLE ROLL (1 to 47 rolls) 1 TO 2 CASES(48, 96 rolls) 3 TO 5 CASES(144, 192, 240 rolls) 6+ CASES(288, 336, 384, ... rolls) | * 1 case
minimum required $9.42 $9.19 $8.47 |
$452.16 $441.12 $406.56 |
|---|
1-1/2 in. x 60 yds.
Actual Size: 36mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/1560 | 32 | SINGLE ROLL (1 to 31 rolls) 1 TO 2 CASES(32, 64 rolls) 3 TO 5 CASES(96, 128, 160 rolls) 6+ CASES(192, 224, 256, ... rolls) | * 1 case
minimum required $13.99 $13.64 $12.55 |
$447.68 $436.48 $401.60 |
|---|
2 in. x 60 yds.
Actual Size: 48mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/260 | 24 | SINGLE ROLL (1 to 23 rolls) 1 TO 2 CASES(24, 48 rolls) 3 TO 5 CASES(72, 96, 120 rolls) 6+ CASES(144, 168, 192, ... rolls) | * 1 case
minimum required $18.54 $18.08 $16.64 |
$444.96 $433.92 $399.36 |
|---|
2-1/2 in. x 60 yds.
Actual Size: 60mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/2560 | 20 | SINGLE ROLL (1 to 19 rolls) 1 TO 2 CASES(20, 40 rolls) 3 TO 5 CASES(60, 80, 100 rolls) 6+ CASES(120, 140, 160, ... rolls) | * 1 case
minimum required $24.35 $23.74 $21.83 |
$487.00 $474.80 $436.60 |
|---|
3 in. x 60 yds.
Actual Size: 72mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/360 | 16 | SINGLE ROLL (1 to 15 rolls) 1 TO 2 CASES(16, 32 rolls) 3 TO 5 CASES(48, 64, 80 rolls) 6+ CASES(96, 112, 128, ... rolls) | * 1 case
minimum required $27.66 $26.97 $24.81 |
$442.56 $431.52 $396.96 |
|---|
4 in. x 60 yds.
Actual Size: 96mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/460 | 12 | SINGLE ROLL (1 to 11 rolls) 1 TO 2 CASES(12, 24 rolls) 3 TO 5 CASES(36, 48, 60 rolls) 6+ CASES(72, 84, 96, ... rolls) | * 1 case
minimum required $36.78 $35.86 $33.00 |
$441.36 $430.32 $396.00 |
|---|
5 in. x 60 yds.
Actual Size: 120mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/560 | 10 | SINGLE ROLL (1 to 9 rolls) 1 TO 2 CASES(10, 20 rolls) 3 TO 5 CASES(30, 40, 50 rolls) 6+ CASES(60, 70, 80, ... rolls) | * 1 case
minimum required $48.69 $47.47 $43.67 |
$486.90 $474.70 $436.70 |
|---|
6 in. x 60 yds.
Actual Size: 144mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/660 | 8 | SINGLE ROLL (1 to 7 rolls) 1 TO 2 CASES(8, 16 rolls) 3 TO 5 CASES(24, 32, 40 rolls) 6+ CASES(48, 56, 64, ... rolls) | * 1 case
minimum required $55.03 $53.65 $49.36 |
$440.24 $429.20 $394.88 |
|---|
12 in. x 60 yds.
Actual Size: 288mm x 55m
* typically takes approximately 3 extra business days to ship | AF50/1260 | 4 | SINGLE ROLL (1 to 3 rolls) 1 TO 2 CASES(4, 8 rolls) 3 TO 5 CASES(12, 16, 20 rolls) 6+ CASES(24, 28, 32, ... rolls) | * 1 case
minimum required $114.33 $111.48 $102.56 |
$457.32 $445.92 $410.24 |
|---|
** special order sizes are not returnable (and non-cancelable if material has been ordered or cut before the cancellation request was made)
** special order sizes for this item typically ship direct from our supplier so will not ship together with stocked products
** minimum requirements are due to the fact that the product size is non-stock or special setup is required to cut to that width
** if a particular size has a minimum item requirement please only purchase that size in multiples of that minimum, e.g. if the minimum is 12 then purchase as 12, 24, 36, etc.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
1 mil = 1/1000 of an inchExamples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
