JVCC MT-02 Crepe Paper Masking Tape [Overstock]
No our case pricing on this tape is not a typo. For instance get 72 rolls of 1/2 inch x 60 yard masking tape for $5.76 instead of $102.24. Our converter is trying to clear floor space for new incoming shipments so basically just paying for shipping (or if live close to Fairless Hills, PA come pick it up and forgo that expense also). Overstock items are sold AS IS an are NOT returnable.
MT-02 Special Order Sizes
|ROLL SIZE||ITEM #
||ROLLS PER CASE
||PRICE PER ROLL
||PRICE PER CASE
1/4 in. x 60 yds.
Actual Size: 6mm x 55m
Single Roll (1-143 Rolls)
1 - 4 Cases (144-719 Rolls)
5 - 9 Cases (720-1,439 Rolls)
10+ Cases (>= 1,440 Rolls)
1 case minimum
1/4 in. x 360 yds. *360-yards long
Actual Size: 6mm x 355m
Single Roll (1-35 Rolls)
1 - 4 Cases (36-179 Rolls)
5 - 9 Cases (180-359 Rolls)
10+ Cases (>= 360 Rolls)
1 case minimum
1/2 in. x 60 yds.
Actual Size: 12mm x 55m
Single Roll (1-71 Rolls)
1 - 4 Cases (72-359 Rolls)
5 - 9 Cases (360-719 Rolls)
10+ Cases (>= 720 Rolls)
1 case minimum
Special Order Policies & Footnotes:
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
Special Order Minimums
- Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
- Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
JVCC MT-02 Crepe Paper Grade Masking Tape is an economical overstock masking tape from a major manufacturer which comes on a stripped cardboard core. It is a solvent-resistant crepe paper coated with a natural rubber adhesive specifically designed for paint masking applications. The adhesive removes cleanly from a surface without leaving residue or ghosting behind. It is also designed for general-purpose masking as well as for holding, sealing and splicing wherever stain and transfer resistance is desired. The crepe paper backing on the tape also provides elongation required to mask around tight curves. The 1/4 inch width size provides an economical way to tie off produce and other plastic bags. As noted previously this is an overstock product and different manufacturer products and lots are used to fulfill orders so for each width ordered the shading and thickness of the tape may vary. Please note this product is overstock and has lower adhesion than a non-overstock item. Overstock items are sold AS IS an are NOT returnable.
JVCC MT-02 Crepe Paper Masking Tape
- Adhesive: rubber/resin How are adhesives different?
- Carrier/Backing: impregnated crepe paper
- Thickness: 7.5 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 30 ounces per inch (to stainless steel test panel)
- Tensile Strength: 20 pounds per inch (longitudinal)
- Application Temperature: 50°F (minimum)
- Elongation: 6%
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils