Shurtape PE-100

Shurtape PE-100
See also
Electrical Tapes
Tapes for Scrapbooking

Shurtape PE-100 Temporary Flooring Tape

Print Page
  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
  • Roll Size *
    2 in. x 60 yds. (black, white), 2 in. x 60 yds. (pink)
    Most Popular Option: 2 in. x 60 yds. (White) | See "Pricing Table" below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please click on the "Product Description & Specs" tab below for more information about this item.

PE-100 Standard sizes


2 in. x 60 yds. (black, white)

Actual Size: 48mm x 55m

PE-100/ 26024

Single Roll (1-23 Rolls)

1 - 3 Cases (24-95 Rolls)

4 - 6 Cases (96-167 Rolls)

7+ Cases (>= 168 Rolls)









Nominal Tape Widths vs Actual Widths

Nominal vs. Actual Widths Zoom In

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

PE-100 Special Order Sizes


2 in. x 60 yds. (pink)

Actual Size: 48mm x 55m

PE-100/ 260P24

Single Roll (1-23 Rolls)

7+ Cases (>= 168 Rolls)

7 case minimum




Special Order Policies & Footnotes:

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Product Description

Shurtape PE-100 Temporary Flooring Tape is a specialty tape used on wood floors with water-based finishes to secure protective coverings and for creating temporary lines & boundaries on gym floor courts. Shurtape PE 100 FloorMate tape comes up clean on a properly prepped/cured wood finish, is conformable enough to create curves, is more durable than paper tapes, removes without tearing or splintering, works for paint masking and is available in three colors (white, black and pink).

Test tape in an inconspicuous area before using. It is for temporary use only. Finish damage is difficult and expensive to repair on wood floors, so assure preparation and finish application are done per finish manufacturer's recommendations. Allow finish to cure fully before applying tape. Remove tape slowly prior to 30 days on the floor.



  • Bona Traffic
  • DuraSeal polyurethane
  • Hillyard Contender
  • Loba Hybrid
  • Loba WS Easyfinish
  • NewAge Full Court Press
  • StreetShoe Basic
  • StreetShoe 275
  • Varathane Floor Finish
  • X Terra
  • Zinsser polyurethane
  • Deft Defthane polyurethane
  • Hillyard 350 Gym Finish


Technical Information

Shurtape PE-100 Temporary Flooring Tape
  • Adhesive: rubber   How are adhesives different?
  • Carrier/Backing: polyethylene film
  • Thickness: 4.8 mils (carrier, adhesive)    What is a mil?
  • Adhesion: 15 ounces per inch (to stainless steel)
  • Tensile Strength: 10 pounds per inch (longitudinal)
  • Service/Operating Temperature: 32°F to 160°F
  • Elongation: 332%
  • Water Vapor Transmission Rate: 0.4 gm/100 sq in/24 hr
  • Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.

AlertRoll Sizes/Widths:

Please note that tape rolls are NOT guaranteed to be splice- free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).

Download Datasheets

Download Datasheets

The following downloads are available for this product:

Download Product Data Sheet
Shurtape PE-100 Temporary Flooring Tape
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Continue Shopping View Shopping Cart