Painters Tape Sitemap

ScotchBlue Original Painter's Tape is a medium adhesion tape ideal for paint masking on multiple surfaces including painted walls and trim, woodwork, glass, and metal. It can be removed cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight. 3M Scotch-Blue should NOT be used wallpapers, unpainted wallboard, wood floors, or poorly bonded surfaces. Options include tape in 60-yard rolls plus a die-cut version for corners and hinges. A brand of 3M. 3M 2090 Benefits: Adhesive sticks easily to the surface and stays intact upon removal which reduces labor and rework. Adhesive is light and UV stable. Adhesive has minimal adhesion buildup over time which helps produce high-quality results. Crepe paper backing is conformable and offers consistent surface contact for a secure hold. The tape's backing is strong so it removes from a surface without tearing, but is still easy to tear. The backing saturant is solvent and moisture resistant so it resists paint bleed-through and the adhesive doesn't transfer when the tape is wet.

Scotch® Rough Surface Painter’s Tape has a very strong adhesive designed for performance on rough, non-damageable surfaces. Use on brick, concrete, stucco, or rough wood for the protection you need to get the job done. Scotch® Rough Surface Painter’s Masking Tape is recommended for use with or on lacquer coatings. This tape holds to surfaces for up to 5 days and then removes easily without leaving any sticky residue behind. A brand of 3M. Features & Benefits Designed for use on concrete, brick, stucco, and rough wood. 5-day clean removal leaves behind no damage or sticky residue. Very strong adhesive. Recommended for use with or on lacquer coatings. Bonds aggressively, yet has a smooth unwind.

FrogTape Delicate Surface Painters Tape is a low-adhesion painters tape designed for use on the following surfaces: Freshly painted surfaces (24 hours old) Faux finishes Primed wallboard / sheetrock Wallpaper Finished wood (Polyurethane, Stain) Veneer, laminate and vinyl FrogTape Delicate Surface will remove cleanly from most surfaces for up to 60 days. It's recommended to test before use on all surfaces including those with texture. Patented PaintBlock® Technology is what makes it different from other painter's tapes. This technology prevents latex paint from bleeding by forming a micro-barrier along the edges (it reacts with the water in latex paint). You get a fully sealed tape edge resulting in the sharpest paint lines possible. PaintBlock® is Superabsorbent Polymer (SAP) which absorbs and retains large amounts of a liquid relative to its own mass - it is used in many everyday items, including baby diapers. As with any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of the paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape.

FrogTape Multi-Surface Painters Tape is a medium-adhesion painters tape designed for use on the following surfaces: Cured painted walls Unfinished wood and wood trim Glass Metal Stone FrogTape Multi-surface will remove cleanly from most surfaces for up to 21 days and 7 days in direct sunlight. It's recommended to test before use on all surfaces including those with texture. Patented PaintBlock® Technology is what makes it different from other painter's tapes. This technology prevents latex paint from bleeding by forming a micro-barrier along the edges (it reacts with the water in latex paint). You get a fully sealed tape edge resulting in the sharpest paint lines possible. PaintBlock® is Superabsorbent Polymer (SAP) which absorbs and retains large amounts of a liquid relative to its own mass - it is used in many everyday items, including baby diapers. As with any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of the paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape.

Painter's Mate Green Painters Tape is used for masking of painted surfaces, wood and metal, and also to hold plastic or paper drop cloths. Green Painters Tape removes cleanly from painted wood, glass, painted sheetrock, and metals for up to 8 days. UV resistant, flexible and conformable with high shear strength for a secure hold. Resists paint bleed-through. Not for use in lacquer applications or on anodized aluminum.

Scotch Delicate Surface Painter's Tape is great for surfaces that require a little extra care such as wood floors, wallpaper, cabinets, painted drywall, and freshly painted walls* (*at least 24 hours prior). This delicate surface tape with gentle adhesive can stay on surfaces for up to 60 days and then removes easily without leaving any sticky residue behind. This tape features Edge-Lock™ Technology that seals out paint to deliver sharp paint lines and clean removal for your more sensitive projects, including accent walls, decorative stripes, and patterns. Whether you're protecting your hardwood floors from paint splatter or going all out with a decorative mural, rely on Scotch® Delicate Surface Painter's Masking Tape for a professional look that's easy on your surfaces. A brand of 3M. Features & Benefits Designed for use on delicate surfaces such as painted drywall, freshly painted walls*, wood floors, wallpaper, veneers, and cabinets. Great for accent walls, decorative stripes or patterns. Edge-Lock Technology seals out paint to deliver sharp paint lines. 60-day clean removal leaves behind no damage or sticky residue. Gentle adhesive. UV and sunlight resistant (intended for indoor use only).

With its finely creped paper masking tape and its natural rubber adhesive, tesa 4325 General Purpose Masking Tape is the perfect solution for any application. There is a wide range of uses for the product, such as masking, holding, sealing, fixing, and light-duty packaging, and the product is suitable for general-purpose services. As a result of the crepe paper backing, good conformability can be maintained. In addition, the natural rubber adhesive system has good adhesion to multiple surfaces and good tack. There are two sizes of this product available, with a length of 55 yards and widths of one or two inches. Features & Benefits With Tesa® 4325, they can mask, hold, seal, fix, and package delicate items Crepe paper backing ensures good conformability The Tesa® 4325 material is tearable by hand It comes in two sizes with a length of 55 yards and widths of 1 or 2 inches

Shurtape CP-500 High Temperature Masking Tape is ideal for today's high tech transportation industry and for wet sanding applications. This tape works best in metal preparation, high-temperature painting applications and coating. Strips cleanly after baking or extended applications (up to 300°F). Used for both the automotive aftermarket and other industrial uses. Typical Applications Metal preparation Painting and coating High-tech transportation industry (auto, coaches, buses and marine) Benefits and Features No adhesive residue Quick stick Clean, flat edges Strong adhesion to metals, rubber, plastics and fiberglass Strips cleanly with no residue or paint flake after baking and extended application periods Solvent resistant Excellent adhesion to tape backing and masking papers Smooth unwind

For highly demanding paint masking applications, tesa 4338 High Performance Masking Grade Tape is a green-colored smooth masking tape. It is particularly suitable for use in the marine, railroad, truck, and other transportation industries where clean paint edges and high conformability are required. By using tesa® 4338 Green's advanced adhesive technology, the painting process is smoother, operators are more satisfied, and manufacturers are happier. In addition, with its UV and weather-resistant properties, up to 7 days without residue, this tape offers a thin, clean paint edge that results from the lower tape thickness, resulting in a clean, crisp paint line. It comes in two sizes: 1-inch and 2-inch by 55-yard length. Features & Benefits Comfortable to unwind No residue left behind after removal UV and weather resistance up to 7 days without residues High-temperature resistance | Multiple drying cycles Excellent handling properties Secure bonding thanks to superior peel adhesion Country of Origin: Germany.

ScotchBlue™ Sharp Lines Painter's Tape features Edge-Lock™ Technology that seals out paint to deliver sharp paint lines. Whether you’re protecting your wood trim, painted walls, tile floor, or glass windows, this versatile multi-surface tape can stay on surfaces for up to 21 days and then removes easily without leaving any sticky residue behind. Help keep your wainscoting paint free or shield your built-in shelves with the powerful protection of ScotchBlue Sharp Lines Painter's Masking Tape. A brand of 3M. Features & Benefits Designed for use on multiple surfaces such as smooth or lightly textured walls, trim, baseboards, tile and glass. Edge-Lock Technology seals out paint to deliver sharp paint lines. 21-day clean removal leaves behind no damage or sticky residue. Medium adhesive. UV and sunlight resistant.

tesa 4334 Precision Mask Painters Tape is a high-performance paper masking tape for precise and flat paint edges and features an extra-thin and strong paper backing coated with an acrylic adhesive. The combination of the highly equipped backing material and the outstanding special adhesive formulation allows easy removability up to 5 months after application, with 4 weeks of UV resistance. These features allow for multiple working processes in only one covering application. tesa 4334 Precision Mask is suited for most indoor paint projects and works with water-based paints and lacquers. It even works with high-class spatula techniques. This tape is suitable for a variety of common surfaces such as glass, aluminum, hard-PVC, wood, sensitive or rough surfaces. tesa 4334 Precision Mask Painters Tape is perfect for indoor applications when a precise razor-sharp paint edge is needed. Features & Benefits Hand tearability Suitable for sensitive surfaces UV resistant - up to 4 weeks Suitable for rough surfaces Paint anchorage Sharp color edge Conformability

Shurtape PE-444 UV-Resistant Stucco Masking Tape is widely used in building and construction industries to temporary mask surfaces while applying stucco or painting. This UV-resistant polyethylene film tape features a special synthetic high-tack adhesive for a watertight seal that stands up in harsh environments and through all weather conditions. It removes cleanly with no leftover residue and has excellent conformability. Product Applications Masking windows, door frames and other surfaces while applying stucco or painting. Masking wood, vinyl, metal and tile during painting. Sealing seams on tarps and greenhouses. Indoor and outdoor use.

Shurtape PC-622 Premium-Grade Stucco Duct Tape is a 12 mil thick premium-grade duct tape used for HVAC duct systems; the protection of window and door frames during stucco application; high-performance motorsports applications; silk screening; and heavy-duty bundling, sealing, seaming and splicing. Shurtape PC 622 has high tensile strength, is conformable, has a waterproof backing, and has excellent holding power. UL 723 listed. It is currently offered in 5 stock colors: black, red, silver-white and olive drab. PC 622 comes with Shurtape's Polyblended CO-EX technology with is a co-extrusion process which melds polyethylene, cloth, and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate). Please note Shurtape's version of olive drab is very dark as displayed in the product photo.

FrogTape Pro Grade Orange Painters Tape is a high-adhesion painters tape that quickly sticks to a variety of surfaces, even in hot and humid conditions. This has a conformable backing that makes it easy to use on interior and exterior applications. It is easy to apply and removes cleanly without shredding for three days. Also known as Shurtape CP 199. Designed for use on or for: Cured painted walls and trim Unfinished wood Glass Masking light fixtures Doorways Windows Metal Stone Hanging poly for protection while spraying

Duck Clean Release Blue Painter's Tape helps you achieve clean paint lines and cuts down on your touch-up time. Medium adhesion makes this masking tape ideal for a variety of hard, durable surfaces like glass, vinyl, metal, wood, painted walls, trim, and tile. Plus, it features 14-day clean removal and is UV-resistant for indoor and outdoor use, giving you clean paint lines no matter the project. It is NOT recommended for use on wallpaper, unpainted wallboard, ceiling tile or surfaces with uncured coatings. For delicate surfaces like wallpaper, drywall, and ceiling tile please see FrogTape Delicate Surface yellow painters tape. Its synthetic rubber-based adhesive prevents lifting and paint seepage Features & Benefits: Ideal for a variety of surfaces including painted walls, trim, glass, wood and metal UV-resistant for safe use on indoor and outdoor projects 14-day clean removal without residue, in indirect or no sunlight Available in a variety of sizes Great for temporary indoor floor marking and removes cleanly from most surfaces for up to 60 days. Not recommended for hardwood floors Medium adhesion tape offers good quick-stick with easy removal

Intertape PG21 High Temperature Masking Tape is an extremely versatile masking tape which is resistant to strong solvents and paints and is easily removed in warm or cold environments. It is designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes (time and temperature determined by surface). IPG PG21 performs well in wet strip applications and its easy handling, smooth paper crepe backing exhibits high strength, excellent conformability to irregular surfaces and exceptional cornering. It provides resistance to paint flaking as well as a clean, well-defined paint line. Applications uses include automotive, truck, bus, and marine paint masking. Recommended hot to warm removal, but can be removed cold.

3M 301+ Performance Yellow Masking Tape is a versatile masking tape that combines a robust crepe paper backing with one of 3M’s proprietary solvent-free adhesive formulas to deliver a product that can meet the demands of various industrial applications. The yellow crepe paper backing provides excellent visibility during masking, can be torn easily, is resistant to bleed-through/slivering, and remains in place around corners, over contours, and on irregular surfaces. 3M’s proprietary adhesive formula sticks securely to a variety of surfaces, including metal, rubber moldings, plastic, glass, wood, concrete, and painted surfaces with ease, leaving behind no residue when removed. Able to withstand surface temperatures up to 225° F / 107° C for up to 30 minutes. Uses & Applications Industrial Paint Masking MRO Applications Woodworking and Concrete Bundling Color Coding Sealing

Scotch 401+ High Performance Green Masking Tape is the preferred choice among industrial painters who demand results. Built on a foundation of innovation, 401+ tape is designed to deliver super-sharp paint lines in applications where surface temperatures can reach up to 250° Fahrenheit. When you consider 401+ can also be used to accomplish everything 3M Industrial Masking Tapes 101+, 201+ and 301+ can do, it’s quite possibly the most versatile tape in the line. It’s one mean, green, masking machine, designed to deliver the consistently superior results you’ve come to expect from 3M. Ideal for critical paint masking applications in automotive, specialty vehicle and industrial markets where strong holding and high temp performance is required, it is frequently used in two-tone color applications on trucks, buses, trailers, trains, fire trucks, ambulances, and airplanes. 3M Scotch 401+ High Performance green masking tape is a solvent-free adhesive that offers 36 ounces per inch of peel adhesion compared to 3M's blue painter’s tape, which only offers 23 ounces per inch. This means it maintains an exceptionally strong hold on metal, rubber, glass, and plastic, yet it is still designed to remove cleanly in one piece, without leaving any residue behind. The conformability of 401+ makes this tape especially useful when placing it around corners, over contours and irregular surfaces. Features & Benefits Superior adhesion to metal, rubber, glass, and plastic, while removing cleanly in one piece with no adhesive residue. Highly conformable to many surfaces. Resists paint bleed-through and creates super-sharp paint lines. Green backing improves visibility and accuracy during paint masking. Ideal for high-performance industrial painting, including two-tone color applications on trucks, buses, trailers, trains, fire trucks, ambulances, and airplanes. Withstands surface temperatures up to 250°F (121°C) for 30 minutes.

Scotch® Exterior Surface Painter’s Tape was developed for outdoor painting projects for when you need a tape that can handle wind, rain, humidity and direct sunlight. This innovative poly-tape is different than standard 3M paper painter’s tapes, it conforms to curves, tears straight for fast cornering, and best of all, removes from the surface without tearing or slivering. Use it outdoors on smooth and semi-smooth metal, vinyl, painted wood, and glass?. Scotch® Exterior Surface Painter’s Masking Tape holds to surfaces for up to 10 days in all kinds of challenging weather and then removes easily without leaving any sticky residue behind. A brand of 3M. Features & Benefits Designed for use on exterior surfaces such as smooth and semi-smooth metal, vinyl, painted wood, and glass. Innovative poly-tape is weatherproof and provides tear-free removal. 10-day clean removal leaves behind no damage or sticky residue. Very strong adhesive. Flake resistance waterproof backing. UV and sunlight resistant. Works well in humid conditions

Nashua CleanDrape Double-Sided Abatement Tape has a multi-layer cloth & paper construction which provides the strength of duct tape with the clean removability of painters masking tape. Used to hang poly sheeting to a variety of surfaces such as wood, glass, aluminum, plastics, and vinyl during painting, sanding, construction, remodeling, mold, and asbestos abatement applications. Its blue side offers clean removal for up to 14 days on a variety of surfaces such as drywall. Rubber-based adhesive provides a strong bond to poly sheeting. CleanDrape sheeting tape is also hand-tearable and durable like duct tape. Also referred to as "set tape" or "location tape".

Intertape AM (AquaMask) Medium Temperature Masking Tape is an aqua (blue-green) colored, conformable, saturated, crepe paper masking tape coated with a pressure-sensitive rubber adhesive. The rubber-based adhesive provides secure adhesion to both painted and bare metal and plastic surfaces. This tape is primarily used for paint masking requiring adhesion to and removal from a variety of surfaces. Intertape Aquamask removes clean and easy making it an ideal choice for even the most demanding projects. This tape resists paint flaking from the backside or surface staining and wet sanding and is compatible with both water and solvent-based paints. Additional features include UV-resistant up to three (3) days and temperature resistant up to 225°F (107°C) for 30 minutes. Features and Benefits Conformable Good adhesion and holding properties Easy removal No residue Resists paint flaking and wet sanding Indoor and outdoor

Nitto P-703 High Temperature Masking Tape, a high-quality crepe paper masking tape, is designed for paint masking applications in high temperatures. Nitto P-703 (previously known as Permacel P-703) is commonly used for general purpose masking in addition to splicing and holding. It is especially useful with hard-to-hold surfaces like chemically treated fabric. This Nitto tape is resistant to alkyd and acrylic paint solvents, with fair resistance to highly active polyurethane paint solvents and ketones. Nitto P-703 can withstand temperatures up to 300 degrees Fahrenheit (149 degrees Celsius) for up to 1.5 hours without mass transfer or slivering when removed. It supports Kraft masking paint drapes at baking temperature. Features & Benefits Good high baking temperature properties. Coated with natural rubber adhesive for high temperature paint masking. Resistant to solvents and stains. No odor. Ages well; long shelf life. Excellent tear strength. Quick-stick and high-hold characteristics. Good elongation with optimal conformability around corners and on uneven surfaces. Smooth and thin; prevents paint build-up along edges. Doesn't highlight on appliance finishes. Product Applications Paint masking in aerospace, automotive and housing markets. General purpose masking to 300 degrees Fahrenheit (149 degrees Celsius). Can be used on rough substrates like cinder block walls in schools.

3M UV Resistant Green Masking Tape offers 14 days of UV resistance without compromising on holding power or paint line quality. It reliably adheres to a variety of substrates and conforms to irregular surfaces, making it a great choice for various holding, bundling and paint masking applications. The crepe paper tape withstands temperatures of up to 175 F (79 C) for up to 30 minutes. Indoors and outdoors, the tape removes cleanly from most surfaces with little to no edge residue for up to 14 days. It features controlled unwind to prevent slivering and tears easily from the roll by hand. Intended for applications where UV exposure is expected, including bundling, holding, sealing, paint masking and surface protection. Features & Benefits RELIABLE UV RESISTANCE: Helps ensure dependable performance in outdoor applications for up to 14 days. CLEAN REMOVAL: Removes cleanly from most surfaces with little to no edge residue. HIGH-PERFORMANCE: Securely grips to a variety of substrates. CONSISTENT AND QUALITY PAINT LINES: Resists bleed through to deliver crisp paint lines. VERSATILE USE: Offers an easy unwind and manual tearing for indoor and outdoor applications.

FrogTape 325 Pink Performance Grade Masking Tape is engineered for professional results in challenging marine, automotive, transportation, and other applications where industrial coatings are applied. Smooth, conformable, and durable, FrogTape 325 adheres to multiple industrial surfaces. When the job is done, it removes cleanly and easily for professional results. The only thing it won't mask is your craftsmanship. Features & Benefits Highly durable masking tape for demanding, high-temperature paint masking and metal fabrication applications in the transportation (auto, coaches, buses, and marine) industry Meets or exceeds AMS-T-21595, ASTM D 6123/D 6123M-97 (2012), Type I standards Highly conformable for rounding curves and contours Provides medium-high adhesion, resistant to water, various solvents, and gel coats Strong, smooth crepe paper backing is tear- and sliver-resistant Can also be used for metal preparation, painting, coating, and gel coat masking Easy to unwind, residue-free removal Temperature-resistant up to 325°F UV-resistant for up to 3 days Recommended for indoor use only

tesa 4174 PVC Fineline Masking Tape is a flexible, temperature-resistant PVC fine line masking tape with a rubber adhesive for a wide range of automotive design painting requirements. The 110 µm / 4.33 mils thickness helps implement excellent and sharp paint edges and still offers good conformability. Tesa® 4174 is suitable for various types of masking applications. For example, marking painted and non-painted substrates (automotive plastic parts) that require sharp and flat paint edges and two-tone car body masking. Features & Benefits Excellent masking performance on painted and non-painted substrates No ghosting or residues until 302°F (1 hour) / 150°C Good conformability with multidimensional surfaces Edge does not lift off and residue-free removal

Professional grade Shurtape DS-154 Double-Sided Containment Tape is designed for creating high-performance containment systems. It is ideal when used for cleaning, mold remediation, sanding, asbestos removal, painting and more as part of abatement, restoration and remodeling projects. Shurtape DS-154 tape has a premium painter's tape adhesive on one side that provides clean removal after up to 21 days from many different surfaces. On the other side, there's an aggressive adhesive that will hold a variety of protective coverings for up to 2 weeks. This double-sided (AKA double-faced or double-coated) tape is a single-step, single-tape solution for your most challenging remediation or renovation projects. Features & Benefits Holds strong in dry and wet environments Conforms to uneven surfaces Differential adhesive system Can be torn by hand and repositioned Easily and quickly removable Good for light duty dust control Won't damage wall surfaces Project Applications High-performance containment system for: Painting Sanding Mold remediation Asbestos removal Cleaning Securely holds: Tarps Poly-sheeting Other protective coverings

FrogTape Pro Grade Blue Painters Tape is a medium-adhesion painters tape designed for use on: Cured painted walls and trim Unfinished wood Glass Metal Stone FrogTape Pro Grade (AKA Shurtape CP-130) Painters Tape has 14-day clean removal and is UV resistant. It's recommended to test before use on all surfaces including those with texture. Patented PaintBlock® Technology is what makes it different from other painter's tapes. This technology prevents latex paint from bleeding by forming a micro-barrier along the edges (it reacts with the water in latex paint). You get a fully sealed tape edge resulting in the sharpest paint lines possible. PaintBlock® is Superabsorbent Polymer (SAP) which absorbs and retains large amounts of a liquid relative to its own mass - it is used in many everyday items, including baby diapers. As with any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of the paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape.

JVCC PGM-UV Painter's Grade Masking Tape is a masking tape with a specially formulated solvent based acrylic adhesive system that provides clean removal characteristics and UV resistance (up to 14 days of outdoor exposure). JVCC PGM-UV's peel adhesion does not increase with time allowing for removal off of a wide variety of surfaces such as drywall without surface damage. For other blue painters tape products please see Shurtape CP-27 or 3M 2090.

Shurtape CP-27 14-Day Blue Painters Tape is also known as 14-Day ShurRELEASE Professional Grade Crepe Paper Masking Tape. Shurtape Blue Painters Tape can be used on glass, vinyl, metal, wood, painted walls and trim where clean removal is required after and up to fourteen days of exposure to direct sunlight. It is NOT recommended for use on wallpaper, unpainted wallboard, ceiling tile or surfaces with uncured coatings. For delicate surfaces like wallpaper, drywall, and ceiling tile use Shurtape CP-28. Its synthetic rubber-based adhesive prevents lifting and paint seepage. Shurtape CP 27 has excellent 14-day UV resistance and good performance for a variety of applications that require easy removal. The 1/2 in. width requires a 1 case minimum order since special setup is required to custom cut and rewind rolls from existing Shurtape CP-27 2 in. rolls. Delivered rolls will be on a plain white core.-->

FrogTape 225 Gold Performance Grade Masking Tape is engineered for professional results in challenging marine, automotive, transportation, and other applications where industrial coatings are applied. Smooth, conformable, and durable, this FrogTape 225 gold-colored masking tape adheres to multiple industrial surfaces and withstands abuse: even high temperatures and bake cycles for up to 30 minutes. When the job is done, the tape removes cleanly and easily for professional results. Features & Benefits Use this standard masking tape in a variety of ways at your business or office Rubber adhesive for good adhesion and good holding power that resists lifting or curling Removes cleanly and easily without leaving a residue Resistant to water, various solvents, and gel coats

FrogTape 250 Light Blue Performance Grade Masking Tape offers various levels of heat resistance with clean removal for use in industrial applications. Ideal for use in painting and metal fabrication applications in the transportation, marine, and general MRO industries, these high-performance masking tapes can resist temperatures from 225° F up to 325° F for up to 30 minutes and higher temps for shorter durations. When subjected to extreme temperatures and various industrial coatings, the rubber adhesive system allows for clean removal from metal, rubber, plastics, and other surfaces. Features & Benefits Medium-high adhesion Excellent adhesion to multiple surfaces and substrates, including metal, rubber, plastic and fiberglass Resistant to water, various solvents and gel coats Clean, flat edges for sharper paint lines Easy to unwind Highly conformable for rounding curves and contours Temperature-resistant up to 250°F Residue-free removal Strong, smooth crepe paper backing is tear- and sliver-resistant UV-resistant for up to 3 days Also used for wet sanding applications Recommended for indoor use only

Painter's Mate Ultra Painters Tape offers a premium adhesive formulated with PaintSync Technology® allowing you to get better adhesion to surfaces, including those that are hard-to-stick-to, without damaging what is underneath. 14-day clean removal allows a longer time between prepping and painting to give you the desired results. Get professional results without the premium price. Features & Benefits Recommended for use on painted walls, wood trim, glass, metal and vinyl Premium paper provides good conformability Interior/exterior use on cured painted walls, wood trim, glass and metal PaintSync Technology® provides better adhesion to surfaces, including hard-to-stick-to paints and surfaces 14-day clean removal UV-Resistant

Think tough and think straight when you think Scotch 2460 Ultimate Paint Edge Masking Tape. This ultra-thin, ultra-smooth tape is ideal for creating the long, straight, smooth paint lines you need for the highest quality finished products. It features unique acrylic adhesive technology for good, instant adhesion that is temperature-resistant and capable of withstanding paint bake operations of up to 300°F. This adhesive also peels off cleanly, without leaving residue. The ultra-thin backing of this masking tape produces a low paint ridge for sharp and smooth paint lines, yet is strong enough to pull through paint and caulk without ripping. The adhesive of Scotch Ultimate Paint Edge Masking Tape 2460 maintains good holding power that resists lifting and curling. This tape is also resistant to solvent and moisture, preventing paint bleedthrough. In addition, the thin, yet strong, smooth flat-back paper is easily torn by hand. Paint anchors well to this tape backing, reducing possibility of paint flaking debris, and the translucent backing aids in seeing when the tape has been properly rubbed down to give the best paint lines. This tape easily unwinds from the roll and uses a water-based adhesive, ideal for customers seeking out environmentally preferable solutions. Used across many industries and applications including identification and color coding, holding, masking of straight lines from latex or solvent based paints, or protecting various items during painting and construction. A brand of 3M. Features & Benefits Acrylic adhesive offers good, instant adhesion. Temperature-resistant, capable of withstanding paint bake operations of up to 300°F. Peels off cleanly, without leaving adhesive residue. Ultra-thin backing provides a low paint ridge for sharp, smooth paint lines. Adhesive maintains good holding power that resists lifting and curling. Acrylic adhesive provides UV resistance, which allows outdoor use for up to 21 days with clean removal from most surfaces). Solvent and moisture resistance prevents paint bleedthrough.

Scotch Artist Tape is professional-quality artists' tape that yield hard paint lines yet remove them quickly, leaving no residue. As a result, you can remove the most complex surfaces without damage. These tapes are ideal for paper, metal, and plastic; we recommend testing before use. A brand of 3M. Features & Benefits: Artist Tape for Canvas Ideal for paper, metal and plastic Removes from most surfaces without damage Color: Natural Features & Benefits: Low Tack Artist Tape Short-term bond on delicate surfaces Removes without damage Acid-free, photo safe, no wrinkle formulation Color: White Features & Benefits: Artist Tape for Curves Removes from most hard surfaces without damage Creates hard paint lines Great for creating curves Testing Prior To Use Recommended Color: Light Blue

ScotchBlue™ Ultra Sharp Lines Painter’s Masking Tape features Advanced Edge-Lock™ Technology that seals out paint to reveal ultra sharp paint lines. This innovative poly-tape is different than standard 3M paper painter’s tapes, it conforms to curves, tears straight for fast cornering, and best of all, removes from the surface without tearing or slivering. Whether you’re protecting your wood trim, painted walls, tile floor, or glass windows, this versatile multi-surface tape can stay on surfaces for up to 28 days and then removes easily without leaving any sticky residue behind. A brand of 3M. Features & Benefits Designed for use on multiple surfaces such as smooth or lightly textured walls, trim, baseboards, tile and glass. Advanced Edge-Lock Technology seals out paint to deliver ultra sharp paint lines. Innovative poly-tape provides tear-free removal. 28-day clean removal leaves behind no damage or sticky residue. UV and sunlight resistant. Intended for indoor use.

Shurtape CP-20 8-Day Green Painters Tape is also known as 8-Day ShurRELEASE Professional Grade Crepe Paper Masking Tape. It is used for masking of painted surfaces, wood and metal, and also to hold plastic or paper drop cloths. Shurtape CP 020 Green Painters Tape removes cleanly from painted wood, glass, painted sheetrock, and metals for up to 8 days. UV resistant, flexible and conformable with high shear strength for a secure hold. Resists paint bleed-through. Not for use in lacquer applications or on anodized aluminum.

Shurtape Printed CP-27 Social Distancing Painters Tape is a blue crepe paper masking tape printed in white with "STAND HERE". Features & Benefits Premium grade, medium adhesion. Great for temporary indoor floor marking. Removes cleanly from most flooring surfaces up to 60 days. *** Not recommended for hardwood floors. Repeated "STAND HERE" perfect for social distancing applications. Tears easily by hand for simple application. UV-resistant.

Shurtape CP-650 High Performance Grade Temperature-Resistant Masking Tape is engineered utilizing a heavy smooth crepe paper backing combined with a moderate temperature, rubber adhesive system. This high heat masking tape exhibits a smooth, consistent unwind which delivers a user-friendly product during application. Shurtape CP 650 is ideally suited for demanding masking applications in the transportation, marine, and metal fabrication industries and is often used as automotive masking tape. Uses & Applications Designed for today's high tech transportation industry (auto, coaches, buses, and marine). Metal preparation, painting, coating and gel coat masking. Strong backing to hold up to the most demanding applications. Features & Benefits Removes cleanly (warm and cold) with no adhesive residue in application temperatures to 325°F. High temperature stability through multiple bake cycles. Strong backing for tear and sliver resistance. Excellent adhesion to metals, rubber, plastics and fiberglass. Conformability for rounding curves and contours. Clean, flat edges for sharp paint lines. Solvent and moisture resistant to minimize bleed-through.

Shurtape CP-99 Premium Grade Crepe Paper Masking Tape helps mask wood and metal for painting and general-purpose applications when a flexible and conformable performance tape is needed. Features good quick stick, strips cleanly in both hot or cold environments, and prevents primer flake-off and paint build-up. Natural crepe paper, moderate tack, rubber-based adhesive. Shurtape CP 99 offers clean removal in hot or cold environments.

Shurtape PC-667 Specialty Grade Stucco Masking Duct Tape is a UV-resistant red cloth duct tape used for protective masking of non-painted surfaces of various materials such as steel, vinyl, aluminum, and anodized metals. Shurtape PC 667 is used in plastering, stucco, concrete, pools, tile and synthetic surfaces when UV resistance is required. It features clean removal (no residue) after 14 days exposure; a waterproof backing; high tack; and easy tearing. PC 667 comes with Shurtape's Polyblended CO-EX technology with is a co-extrusion process which melds polyethylene, cloth and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate).

tesa 4317 Fine Crepe Paper Masking Tape is thin and flexible making it ideal for all general masking applications. The product can also be used when an oven drying application is required up to a temperature of 80°C. This product is resistant to wet sanding and paints and fillers adhere well to the backing, preventing paint drips. The material can be used on painted metal, rubber, glass and chrome parts. Perfect for for masking applications including spray-painting, painting, and varnishing applications. Features & Benefits Excellent holding power on various surfaces. Suitable for oven-drying with temperatures of up to 80C / 176F. Ideal for painting work. Good flexibility for curves. Can be used on painted metal, rubber, glass and chrome parts. Easy to remove and is hand-tearable.

Precision Mask Washi Painters Tape is a high-performance paper masking tape for precise and flat paint edges and features an extra-thin and strong paper backing coated with an acrylic adhesive. The combination of the highly equipped backing material and the outstanding special adhesive formulation allows easy removability up to 2 months after application, with 3 weeks of UV resistance. These features allow for multiple working processes in only one covering application. Uses & Applications Ensures sharp, clean, and flat paint lines. Ideal for 2-tone masking applications. Suitable for use with water- and solvent-based paints and lacquers. Outdoor masking up to 3 weeks. Indoor masking up to 2 months. Temperature resistance up to 120°C / 1 hour or 150°C / half hour

233+ Performance Green Masking Tape delivers consistently superior performance on moldings, plastic, glass, metal, rubber and paint. Balanced four-part construction includes flexible backing that applies easily around vehicle curves and contours and our patented adhesive that sticks at a touch, stays put and removes without transfer for consistently outstanding paint lines. A brand of 3M. Built for Automotive Aftermarket Work Through and Through Auto body professionals will recognize the familiar green color of our Scotch® Performance Green Masking Tape 233+. The distinctive green paper backing helps improve visibility for more accurate edge alignment and is highly conformable – it resists breaking even around complex contours of a vehicle, making for fast application and eliminating the need to apply additional tape. But the backing is only one part of our tape design, balanced specifically for superior performance in auto body paint repair and maintenance. Features & Benefits Features the best developments in premium masking tape technology Unique green backing is highly conformable and has a clean edge designed for critical masking applications Green backing improves visibility and accuracy during paint masking Specially formulated adhesive sticks to most surfaces and removes cleanly for up to five days Adhesive formula removes cleanly in one piece with no adhesive residue Remains in place around corners, over contours and irregular surfaces Resists paint bleed-through to help create super-sharp paint lines Green backing improves visibility and accuracy during paint masking Withstands surface temperatures up to 250° F/ 121° C for 30 minutes for paint bake operations Easy Handling. Good Surface Contact

For outdoor painting, tesa 4439 Precision Mask Outdoor Painters Tape ensures razor-sharp edges. In addition to being tear-resistant and thin, the waterproof masking tape has a special backing that is coated with an acrylate adhesive compound. Both the sticky compound and backing material are also weatherproof and UV-resistant. Despite any weather conditions, the waterproof masking tape can still remain stable for a long time. If an adhesive tape is applied to weathered surfaces, residue may result when the mask is removed. It is thus advisable to test the adhesive on a weathered surface for 24 hours before using it. Precision Mask Outdoor Painters Tape 4439 is ideal for applications that last for an extended time (up to eight weeks). There are many uses for paper masking tapes, and you can use them for paintings of all kinds. They are reliable and will produce excellent results that combine sound artistry with excellent results. We offer these tapes in two sizes, one inch and two inches, with a length of 55 yards in each size. Features & Benefits Outdoor-friendly - Suitable for use in all types of weather conditions Ideal for long-term applications (up to 8 weeks) Surfaces painted or lacquered with flat, sharp edges Ideal for painting and lacquering of high quality Adhesive tape may leave residue on weathered surfaces when removed. Therefore, before using any adhesive, it is recommended to test it on a weathered surface for 24 hours.

Have a DIY project that’s sure to make a mess? The Duck Brand Pre-Taped Masking Film with Dispenser has got you covered the next time you’re painting, sanding or working with tools. Its thicker, two-ply plastic construction stands up to sites with heavy traffic, plus its pre-taped edge helps keep it in place to catch drips, sawdust and other debris. The included dispenser makes application a breeze. Simply unroll to the desired length and use the serrated blade to cleanly cut the film. This dropcloth makes cleanup a breeze when your project is complete so you can save time and move on to your next big idea. Features & Benefits Works on hard, durable surfaces like glass, wood and tile. 4-week clean removal. Indoor/outdoor use. Includes easy-roll dispenser with serrated blade.

The 3M Hand-Masker Pre-Assembled Masking Film Kit is an easy way to get started with 3M Hand-Masker Masking Systems. This tool's versatility and special features make it the contractor's choice for masking. Use for painting, drywall texturing, interior/exterior wall finishing and floor sanding. The 3M Hand-Masker M3000 Dispenser applies pre-folded masking film or plastic (up to 144 in. /12 ft.) or masking paper (up to 18 in.) simultaneously with ScotchBlue Painter's Tape (3/4 in. to 2 in.). Features & Benefits Used when preparing for painting, ceiling texturing, exterior wall finishing or floor sanding. Applies painter's tape to masking film or paper in one continuous application. For use with 3M Hand-Masker Masking Films, Plastic, and ScotchBlue Painter's Tapes. 4 to 5 times faster than paper/poly method. M3000 Dispenser is compact and lightweight with an easy-grip handle. Kit includes: 1 M3000 Dispenser, 1 12 in. Film Blade, 1 roll of 1.5 in. 2090 Tape, 1 roll MF72+ Film. #1 Trusted Brand of Masking Film by Professional Painters.

3M Hand-Masker Dispenser covers and protects in one easy step. This dispenser applies masking tape to masking film up to 144 inch or paper up to 18 inch in one continuous application. Its versatility and special features make it a popular choice among professional painters and contractors and it is 4-5x faster than the paper/poly method. Use the 3M Hand Masker M3000 Dispenser for painting, drywall texturing, interior/exterior wall finishing and floor sanding. Saves time when preparing for painting, ceiling texturing, exterior wall finishing or floor sanding. Use with 3M Hand-Masker Film Blade, 3M Hand-Masker masking films and ScotchBlue Painter's Tapes (sold separately). Ladder hook included. Features & Benefits 4 to 5 times faster than paper/poly method. Saves time when preparing for painting, ceiling texturing, exterior wall finishing or floor sanding. Applies painter's tape to masking film or paper in one continuous application. Compact and lightweight with an easy-grip handle. Can be used with 9 in. or 12 in. blades. Ladder Hook Included. Use with 3M Hand-Masker Film Blade (sold separately). Use with 3M Hand-Masker masking films (sold separately). Use with ScotchBlue Painter's Tapes (sold separately).

ScotchBlue Tape + Plastic Film with Dispenser helps you prepare and protect your surfaces in one convenient step. The ergonomic design allows you to easily dispense tape and plastic film to cover floors, fixtures, windows, doors and more. The dispenser is equipped with ScotchBlue™ Sharp Lines Multi-Surface Painter's Tape to help ensure your paint lines are sharp upon removal, while the plastic sheeting delivers excellent protection from spills and splatters during your painting project. A bit of preparation goes a long way with the protective power and precision of ScotchBlue™ Tape + Plastic with Dispenser and 3M ScotchBlue Tape + Plastic Film with Dispenser. It is available in two sizes: 2 feet by 30 yards by 0.35-millimeter-thick film and 4 feet by 30 yards by 0.35 mm thick film. A brand of 3M. Features & Benefits Easily dispensed, cut, applied, and readjusted if necessary Resistant to UV rays and ultraviolet light Provides protection against accidental paint splatters Keeps plastic attached to walls, counters, and cabinets Multi-surface: Designed to be applied to smooth and light-textured walls, trim, baseboards, tiles, and glass Available sizes: 2 feet by 30 yards by 0.35 mm thick film and 4 feet by 30 yards by 0.35 mm thick film

Hand-Masker Advanced Masking Film is a flake resistant film used for multi-coat applications. Use with the 3M Hand masker M3000 Dispenser for fast paint masking. Great for dust and overspray containment. Static cling feature keeps film in place when using spray equipment and in windy conditions. Helps keep liquid from bleeding through. The film layers have a hassle-free fold to prevent film from getting caught in tape. Ideal for masking baseboards and trim and can be used indoors and outdoors. Features & Benefits Use For Paint Masking And Overspray Protection. Film Layers Feature Hassle-Free Fold To Prevent Film From Getting Caught In Tape. Designed For Use With The 3M Hand-Masker Tool, Scotch Masking Tapes And Scotchblue Painter'S Tapes. Static Cling Feature Keeps Film In Place When Using Spray Equipment And In Windy Conditions. Prevents Liquids From Bleeding Through. Use To Mask Baseboards And Trim. Use Indoors And Outdoors. Saves Time And Money.

Duck Brand Pre-Taped Drop Cloth is a two-ply plastic drop film applied with removable tape. The plastic film resists tears and punctures. The pre-taped edges hold the film securely in place and is designed to remove cleanly for up to 4 weeks. The item is also UV-resistant so it can be used indoors or outdoors. Duck Pre-Taped Drop Cloth is ideal for protecting floors and counters while painting; containing dust while sanding; covering doorways and windows, and protecting foundations and plants. Its pre-taped edge helps keep it in place to catch drips, sawdust, and other debris. Simply unroll, cut to the desired width, apply pre-taped edge and unfold film. For best results make sure surfaces are clean and dry. It's always recommended to test tape in an inconspicuous place before using; the tape is not recommended for use on wallpaper, unpainted drywall or lacquered surfaces.

3M Premium Plastic Sheeting with 233+ Masking Tape is a paintable, high density and tear-resistant translucent film for critical edge masking as well as for paint overspray. We make our overspray protective sheeting in a variety of sizes to protect various types of vehicles, including cars, vans, SUVs and trucks. Our protective sheeting protects a variety of dry surfaces in addition to vehicles. Protective sheeting is perfect for protecting floors, walls, cabinets, stationary tools or any other object found in an automotive body shop or garage. Features & Benefits Protects vehicles from overspray High-density, durable film provides excellent paint overspray adhesion Good tear resistance keep sheet intact during painting Reduces costs associate with removing overspray Use with 3M™ Overspray Protective Sheeting Masker

3M Hand-Masker Film Blade: Whether you're cutting masking film, plastic or paper, these durable stainless steel blades keep your work looking sharp. The 3M Hand Masker FB12, 12 in. Film Blade is designed to cut masking film. Compatible with 3M Hand-Masker Dispenser (M3000). Also available in 3M M3000 starter kits. Features & Benefits Cuts masking film when used with the 3M Hand-Masker M3000 Dispenser. Durable, sharp, stainless steel blade. Includes a plastic blade guard and has an assembly that attaches to the end of the roll to help provide a straight cut. Blade cuts film up to 12 in. Can also be used for cutting paper. Includes: 1 Blade/Pack. #1 Trusted Brand of Masking Film by Professional Painters.

The 3M Hand Masker Masking Plastic is a flake resistant, waterproof plastic used for single coat applications. For use with the 3M Hand-Masker M3000 Dispenser in painting projects when protecting windows, trim, railings and other surfaces. Also works with Scotch Blue Tape and Paper Dispenser. Measuring 2x more per roll, Masking Plastic is an ideal replacement for paper. This flake-resistant plastic is waterproof so you won't have to worry about paint bleed-through. It can also be used outside without being affected by rain, dew or washwater. The translucent color allows light to shine through when masking windows or lights. It's also more conformable than paper and easy to wrap around objects. Features & Benefits Waterproof: Not Affected By Rain, Dew Or Washwater. No Bleed: No Paint Bleed-Through Like Masking Paper. Paint-Flake Resistant: Minimize Messy Clean-Up. Easy To Wrap Around Objects. Translucent: Allows Light To Shine Through. 2X More Per Roll: Compared To 3M Hand-Masker General Purpose Masking Paper. 1 Roll/Pack Size: 12 In. X 120 Yd.. Ideal for single coat paint applications.

The FrogTape™ Drop Cloth Pads are the perfect accessory for any paint job. Designed specifically with small spaces in mind, FrogTape™ Drop Cloth Pads make it easy to protect your floors and surfaces when painting. The leak-proof material protects the floors below, while the slip-resistant bottom holds the pad in place, helping to provide a safer surface for standing and working. The drop cloth pads are also a great spot to place your paint or other supplies and can be easily moved around any room. FrogTape™ Drop Cloth Pads are ideal for tight spaces such as bathrooms, hallways and laundry rooms and also offer great protection for surfaces like countertops. Features & Benefits: Drop Cloth Pads Slip-resistant bottom helps provide a safer surface for standing and working Absorbs liquid to keep drips and spills contained on the drop cloth pad Leak proof so spills will not leak onto the floor below Convenient, small size makes it easy to use in tight spaces like bathrooms, hallways, laundry rooms or countertop surfaces 3 pack, each drop cloth is 2.5 feet x 3 feet