Single-Sided Foam (Weather Striping, etc.) Sitemap

JVCC SCF-01 Single-Sided Foam Tape is a low density, closed-cell PVC foam tape in thicknesses of 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, or 3/4 inches. It is an economical, general-purpose foam tape coated on one side with a high-performance acrylic adhesive. The adhesive on this single-sided foam product is on the exposed side of the tape when you unwind it from the roll; the release liner is pulled away from the non-adhesive side of the tape. A good combination of flexibility and conformability with strength & wear resistance. Also has excellent weatherability and chemical resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations. JVCC SCF-01 Foam Tape is used extensively in the automotive, HVAC and construction industries to provide air & weather-tight seals; for gasketing, cushioning, vibration control in speakers, vehicles, electronic components and door frames. Also for filling and sealing gaps around windows, doors, and car/SUV tops for better insulation. It is a clean, waste-free substitute for liquid sealants. Please make note that this a closed-cell foam product (to compress it 25% it requires 3.0 psi for the 1/16 inch thick up to 4.0 psi for the 3/4 inch thick); it is not soft like an open-cell foam product would be. It also complies with European RoHS directive 2002/95/BC. NOTE: SCF-01 tape can be special ordered in thicknesses ranging from 1/16" to 3/4" and in widths ranging from 3/16" to 54". It can also be ordered in gray, instead of black, if ordering by the case. Please use the contact us page to inquire whether a particular thickness/width combination not shown below is available and what the minimum order requirement would be for that size.

Jaybird & Mais 30/31 Adhesive Foam is a foam substrate combined with a natural rubber adhesive on a release paper liner. The product is 100% latex-free - both the foam substrate and the adhesive coating does not contain any Dry Natural Rubber (DNR) which means there is no latex in the product. The foam is used to make custom padding for areas of the body; especially over lacerations, bumps, and bruises. The foam can also be used in conjunction with taping applications for added protection and abrasion comfort. Additional uses for the Jaybird & Mais 30/31 Adhesive Foam include padding for prosthetic devices. Non-sterile, for external use only. Made in the USA. Available in both 1/8" (Jaybird 30) and 1/4" (Jaybird 31) thicknesses. This product is non-sterile and is not intended to be used for specialized post-surgery applications. Please check with your medical professional prior to using in any other medical application other than it’s intended use.

JVCC SCF-02 Single-Sided Foam Tape combines medium-density closed-cell PVC foam with high performance acrylic adhesive. The higher density foam of this industrial grade tape adds durability for your toughest applications. JVCC SCF-02 tape is flexible and conformable, yet extremely strong and resistant to wear. It’s also weather and chemical resistant. This single-coated PVC foam tape complies with European RoHS directive 2002/95/BC, and it’s extensively used in HVAC, construction and automotive industries. We have this foam tape available in various thicknesses 1/16 inch, 1/8 inch, 3/16 inch, and 1/4 inch. This product is made in the U.S. JVCC's SCF-02 has the release liner applied to the non-adhesive side of the tape. They do this so the adhesive side of the tape will more easily unwind from the roll when you go to use it since it will not adhere well to the silicone-coated release liner it sits on top of. The adhesive is coated on the exposed side of the tape (the tape visible once you unwind it from the roll) instead of the liner side (the tape exposed once you remove the liner). Product Applications Air and weather tight seals Gasketing Cushioning Sound Deadening Vibration control in speakers, vehicles, electronic components and door frames Use on CNC router bed Fill and seal gaps around doors, windows and car or SUV tops for better insulation Clean, waste-free substitute for liquid sealants NOTE: SCF-02 tape can be special ordered in thicknesses ranging from 1/16" to 1/4" and in widths ranging from 3/16" to 54". Please use the contact us page to inquire whether a particular thickness/width combination not shown below is available and what the minimum order requirement would be for that size.

Duck Brand Hold-It For Rugs is a patented non-slip latex foam coated with an adhesive backing on one side. It is designed to keep your rugs and mats in place without any floor damage. Duck Hold-It For Rugs® is repositionable and works on all types of flooring surfaces including vinyl, tile, hardwood, and laminate. Do not use this product if putting a rug or mat down on top of existing carpeting. Since the foam side is going down on top of your flooring (the adhesive side bonds to the rug or mat) it will not leave an adhesive residue behind like some double-sided tapes would. Installation Directions The floor surface must be clean and dry. Measure and cut 'Hold-It For Rugs' to fit the outline of the rug or mat being held in place. Remove the release liner from the foam and apply the exposed liner side to the rug or mat. Press rug down firmly in place.

Duck Brand Heavy-Duty Weatherstrip Seal is a self-adhesive, durable closed-cell EPDM rubber sealing product. It seals cracks and gaps around windows and doors can cause drafts to come into your home, leading to high heating and cooling costs. Comes in different gap sizes and is applied to the door or window frame. Self-Adhesive Duck Heavy-Duty Weatherstrip Seals are made with durable and flexible material, allowing them to stand up against extreme temperatures that cause other seals to freeze or crack. They are a great solution for replacing an old or worn door and window seals, forming a barrier against the outdoor air, as well as dust, pollen, and insects during the warmer months. Use together with other Duck® Brand weatherization products to make your home more comfortable and energy-efficient all year long.

Pres-On P-8500 Series Gasketing Open-Cell Foam Tape is a highly flexible fine cell polyester urethane foam tape designed for automotive gasketing applications. The rubber-based, pressure-sensitive adhesive demonstrates a powerful level of adhesion on a variety of surfaces. Excellent for sealing out dirt and moisture, as well as dampening sound and vibration. Additionally, this tape resists aging, weather conditions, and environmental damage, making it perfect for repairs or installations that need to last for years to come. Application Instructions Thoroughly clean contact surface before use Once P8500 has been applied, it cannot be removed and reused. Ensure alignment is correct and that contact is being made with all desired surfaces. If misaligned, remove and apply a new unit Test product beforehand for system compatibility as individual application conditions can impact results

Duck Brand Vinyl Weatherstrip Seal is a product designed to assist with cracks and gaps around doors which can cause drafts and air leaks that lead to high heating and cooling costs. Duck Vinyl Gasket Weatherstrip Seals are a durable, flexible seal designed to replace damaged or missing weatherstripping around the exterior perimeter of doors to seal out drafts and humidity. They can also help keep out unwanted dust, insects, and pollen during the warmer months. Use together with other Duck Brand weatherization products to make your home more comfortable and energy-efficient all year long. Is an easy to install durable, flexible vinyl seal which includes seal plus nails. This heavy-duty tubular gasket weather seal eliminates drafts and humidity and is great for windows, doors, garages, and sheds.

Mueller Adhesive Backed Foam Rubber combines the durable cushioning capability of foam rubber with a sturdy adhesive backing, allowing you to stick it wherever needed. Add some extra padding to an abrasive spot inside of various footwear to prevent abrasions/blisters or to take pressure off problematic areas. Valuable in various physical therapy applications for both patients and medical professionals. Apply to casts, braces, walkers, canes, crutches, prosthetics, and more to help take stress off injured areas and prevent chafing. This product is non-sterile and is not intended to be used for specialized post-surgery applications. Please check with your medical professional prior to use in any other medical application other than its intended use. Available in 1/8 and 1/4-inch-thick rolls, or a variety pack of 6 inch x 12 inch foam sheets (4 1/8 inch thick, 4 1/4 inch thick).

Pres-On P-8100UL Series Neoprene / EPDM / SBR Foam Tape is a specification grade, medium-density, black, closed-cell Neoprene/EPDM/SBR blend foam tape featuring a high-tack, rubber-based, pressure-sensitive adhesive (PSA) coated on one side with easy-to-use paper release liner. Features & Benefits Absorb shock and dampen sound and vibrations. Provide a tight, long-lasting insulation seal against moisture, dust, and air leaks. Pass FMVSS302, CAN/CSA C22.2 #017-92, and UL 94 HF1 for flammability. Resist acids, alkali, ozone, and oxidation. Application Instructions Ensure bonding surfaces are well unified, clean, dry and free of dirt and oils. Apply firm and even pressure to improve adhesive to surface contact. Allow proper temperature and time to enhance bond strength as adhesive flows onto the surface.

Duck® Brand Rope Caulk seals those smaller holes to keep conditioned air in and outside air out. Simply cut to size and press into place for a cost efficient way to weatherize your home throughout the year while keeping out dust, dirt and insects. Plus, you won’t have to worry about it staining or hardening – just remove when you’re done. Features & Benefits Easy to install Seals out drafts and humidity Paintable/Removable Keeps out dust, insects and pollen Use for gaps around doors and windows

Duck Brand Silicone Weatherstrip Seal is an easy to install strong and flexible silicone seal used to seal gaps up to 1/4 inch around windows and doors. It is a more permanent solution for gaps and drafts than foam seals and is long enough to seal one standard door. Silicone weatherstrip seals are used to seal gaps around windows and doors that may let conditioned air escape and outdoor air in. Duck Silicone Weatherstrip Seal can also help keep out unwanted dust, insects, and pollen during the warmer months. Use together with other Duck Brand weatherization products to make your home more comfortable and energy-efficient all year long.

FindTape PS Polyurethane Foam Tape Strips are very soft, conformable low-density foam strips that can help seal out air, dust, and light when compressed. It has high absorbency to trap moisture, dust, and contaminants. Open-cell foams are resistant to molds, trap particulate matter like dust, and have good soundproofing characteristics. Each lightweight, 1-1/2 inch thick die-cut strip is coated on a single side with a pressure-sensitive rubber-based adhesive. The adhesive is protected by a silicone-treated paper liner. The adhesive has excellent long-term aging and ultimate high bond strength to a variety of surfaces as well as good temperature performance. FindTape PS single-sided foam is perfect to use in the fixture and construction of eye protection, face masks, and hard hats (strips are die-cut into 1-inch wide x 9-inch long strips). Other application ideas include recessed lighting, door, window, and cabinet seals. It also can be used to help cushion, damp sound, and absorb vibration in electronics such as printers, keyboards, computers, aircraft lights, and automotive dashboards. This open-cell foam is very soft and conformable. If your application requires more frequent washing and sanitization, try a closed-cell foam such as the V2A Volara Type 2A polyethylene foam strips.

Mueller Blister Pads are thin, flexible, pressure-sensitive adhesive foam pads that help heal and protect against blisters. The pads conform easily to wherever the blister may be. These also protect against friction and pressure.

Duck Brand Foam Weatherstrip Seal is a single-sided PVC foam tape which seals out unwanted drafts, allergens, and more. Cracks and gaps around windows and doors are a leading cause of high-energy costs in your home throughout the year. This self-adhesive Duck® Foam Weatherstrip Seals are a great solution for sealing small gaps around doors and windows, forming an insulation barrier against drafts and humidity, as well as dust, pollen, and insects during warmer months. The product is available in multiple widths for a quick and easy application process. Use together with other Duck® Brand weatherization products to make your home more comfortable and energy-efficient all year long.

FindTape V2A Volara Type 2A Crosslinked Polyolefin Polyethylene Foam Tape is a closed-celled, irradiation cross-linked polyolefin foam, available in roll and strip form. This low-density foam tape is coated on one side with a high-performance, quick stick, rubber-based adhesive for mounting or positioning. It offers aesthetic appeal as well as an outstanding range of performance characteristics. Its smooth surface, consistent density, and uniform gauge offer superior physical properties. Volara foams are resistant to most chemicals and their low water absorption and vapor transmission rate make them a versatile, dependable foam solution. This polyolefin foam reaches to virtually all markets such as transportation, general industrial, industrial tape, recreation & leisure, and tape & medical. Nonabrasive, flexible Volara Polyethylene Foam can also serve as a protective, archival-quality liner for display cases, drawers, shelves and storage boxes. The general-purpose LDPE is ideal for industrial applications such as gap filler and industrial gaskets. The V2A Volara type is perfect to use in the fixture and construction of face mask shields, hard hats, and eye protection. Since the foam is closed-cell, it has excellent weather and chemical resistance which allows for better washing and sanitization. A good combination of flexibility and conformability with strength and wear resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations. Features & Benefits Great for lining display cases, drawers, shelves and boxes). Low water absorption & vapor transmission. Excellent chemical resistance. Outstanding thermal insulation. Durable, flexible closed-cell foam with a smooth surface. 1/2 in. thick foam. Available in full rolls or strips (strips are die-cut into 3/4 in. x 9 in. strips).

3M 4300 Series Urethane Foam Tape is a conformable, grey, low-density, open-cell single-sided foam tape with pressure-sensitive acrylic adhesive coating. The adhesive is protected by a 0.003 inch (3 mil) thick tan, silicone-treated paper liner and has a very soft, conformable low-density foam which can help seal out air, dust, and light when compressed 50%. Has high absorbency to trap moisture, dust, and contaminants. Application ideas include recessed lighting, door, window, and cabinet seals. It also can be used to help cushion, damp sound and absorb vibration in electronics such as printers, keyboards, computers, aircraft lights, and automotive dashboards. The adhesive has excellent long-term aging and ultimate high bond strength to a variety of surfaces as well as good temperature performance. Please note extra care should be taken when handling these delicate rolls of tape to avoid having tape fall off the tape core.