- JVCC PPT-3R Polyester Circuit Plating Tape
JVCC PPT-3R Polyester Circuit Plating Tape is a 1 mil polyester film coated with 2 mils of silicone adhesive. It resists fumes and chemicals, and leaves minimum residue on removal. It is translucent and allows visibility of circuitry after masking. Film will not break or split during application or removal. A protective tape designed to perform well in all phases of masking operations during printed circuit board production. Engineering grade plating tape. Protects surfaces from splashes and chemical fumes in tin/lead striping and gold tab plating. Suitable for painting. Can also be used for splicing of certain silicone coated papers and films.
- JVCC PPT-36G Silicone Splicing Tape
JVCC PPT-36G Silicone Splicing Tape is a translucent emerald green 2 mil polyester film with 1.6 mils of a nonresiduing pure silicone adhesive. One of the cleanest and strongest splicing tapes available. Its high adhesion and extremely stable adhesive system give it excellent resistance to photo processing chemicals, acids, oils, solvents, aging, staining and water immersion. A superior performance leader card splicing tape. Used for splicing siliconized papers, films and non-woven materials in converting. Used for masking adhesive seams in metal bonding processes.
- JVCC PES-32G Polyester Film Packaging Tape
JVCC PES-32G Polyester Film Packaging Tape is a heavy-duty polyester film packaging tape used to meet the highest of quality & performance requirements. It is used for packaging, sealing, and splicing. This tape features extremely aggressive hot melt rubber based adhesive that insures instant holding power and provides a quick reliable seal when used for strip closure of regular slotted containers, overlap sealing, and fiber drum sealing. This polyester carton sealing tape is used for government packaging since it doesn't stretch or elongate like standard BOPP film packaging tape does.
- JVCC PPT-25C Polyester Circuit Plating Tape
JVCC PPT-25C Polyester Circuit Plating Tape is a 1 mil polyester film coated with 1.5 mils of pre-cured silicone adhesive. It is designed to be fully stable electrically and mechanically at operating temperatures up to 350°F. Adhesive is cured to provide maximum resistance to chemicals and leaves no residue during masking or holding applications. Excellent resistance to abrasives,acids, oils, aging, staining, and water immersion. Used as outer wrap on coils, capacitors, motors, and transformers and for masking in electroplating, anodizing, and PC boards. It can also be used to splice silicone-coated paper and films. Image does not show a full 72 yard roll.
- 3M Scotch 685 Riveters Tape
3M Scotch 685 Riveters Tape is a 1.7 mil thick polyester transparent film coated along the edges of the tape only with green rubber adhesive (the center section is uncoated so there is no adhesive transfer to rivet heads). The tape has a tough non-stretch backing which allows it to easily hold rivets in place during riveting (it resists shattering or slivering). The transparent film acts as a "window" and provides easy visibility of rivets. Used in the aerospace, marine, specialty vehicle, transportation, automotive and metal fabrication industries. Can also be used for general holding applications where visibility of item(s) being held is required. The 3/4 inch width size has a 3/16 inch adhesive strip on each edge while the 1 inch width size has a 1/4 inch adhesive strip on each edge. The adhesive provides good immediate adhesion that helps resist stretching of the tape.
- Scapa 571 Silicone Splicing Tape
Scapa 571 Silicone Splicing Tape is a thin polyester film, single-coated on one side with a custom-formulated silicone pressure sensitive adhesive (opposite side of the film utilizes a standard non-silicone coating). The silicone adhesive provides high initial tack and ensures an excellent bond to silicone coated substrates. This translucent shear-resistant product is pink to enable prompt splice identification and has a soft, conformable adhesive that adheres well to irregular surfaces. It is used for splicing of silicone release papers, films, and other substrates; general-purpose bonding; high-temperature masking; and chemical masking. Scapa 571 features include: Excellent adhesion to silicone coated substrates. High initial tack which insures a good bond. Conforms to achieve good contact to surfaces being spliced. High shear resistance for a strong bond. Color of tape enables prompt splice identification. Is resistant to many chemicals. NOTE: Please note 571 has been discontinued by Scapa and limited inventory now remains. Please see JVCC PPT-36G for an alternative silicone splicing tape.
- Scapa 627 House Wrap Splicing / Sheathing Tape
Scapa 627 House Wrap Splicing / Sheathing Tape is a polyester film, single coated with an aggressive acrylic adhesive. Used for splicing of non-silicone surfaces and seam sealing (e.g. one common use is to seal seams of Tyvek to help provide a vapor barrier against air coming in through seams of house wrap). Comes with serrated/pinked edges for easy hand tearing. Its aggressive, tacky adhesive aides in splicing to various non-silicone surfaces and its printable PET carrier adds dimensional stability and strength. It has excellent balance of tack, peel and tensile strength, maintains adhesion at low temperatures, and exhibits excellent aging and weathering properties. NOTE: Scapa 627 is no longer being carried. Please see Berry Plastics's 628 Barricade Seam & Seal Construction Tape as an alternative.