- Intertape Legend Reinforced Gummed Paper Tape
Intertape Legend Reinforced Gummed Paper Tape is a water-activated reinforced tape designed to provide consistent performance in carton sealing applications where durability, extra strength and reliability are required. It has extra strong fiberglass yarns which are bonded between the high tensile strength sheets for an extra margin of strength. Recommended using on light and average weight cartons up to 25 pounds. Gummed Paper Tape is used for two strip sealing cartons top & bottom. Water-activated reinforced tapes bond instantly to both virgin and recycled fiber (corrugated carton, paper, etc.) surfaces and therefore, generate an immediate destructive bond resulting in a tamper evident package. Starch based adhesive absorbs dust and bonds securely to the carton. Sealing the seam also acts as a dust barrier. Not affected by extreme hot or cold temperatures. Non-cellulose materials can be removed during repulping and allow for easy recycling.
- JVCC MT-02 Industrial Grade Masking Tape (Overstock)
JVCC MT-02 Industrial Grade Masking Tape is an economical overstock crepe paper masking tape from a major manufacturer which comes on a stripped cardboard core. It is a solvent-resistant crepe paper coated with a natural rubber adhesive specifically designed for paint masking applications up to 250°F. The adhesive removes cleanly from a surface without leaving residue or ghosting behind. It is also designed for general-purpose masking as well as for holding, sealing and splicing wherever stain and transfer resistance is desired. The crepe paper backing on the tape also provides elongation required to mask around tight curves. The 1/4 inch width size provides an economical way to tie off produce and other plastic bags. As noted previously this is an overstock product and different manufacturer products and lots are used to fulfill orders so for each width ordered the shading and thickness of the tape may vary.
- Duck Brand Pre-Taped Dropcloth Pre-Taped Painter's Drop Film
Duck Brand Pre-Taped Painter's Drop Cloth is 2-mil plastic drop film applied with a removable cloth tape. The plastic film resists tears and punctures. The removable cloth tape holds the film securely in place and is designed to remove cleanly for up to 4 weeks. The product is also UV-resistant so can be used indoors or outdoors. Duck Pre-Taped Dropcloth is ideal for protecting floors and counters while painting; containing dust while sanding; covering doorways and windows; and protecting foundations and plants. Simply unroll, cut to desired width, apply pre-taped edge and unfold film. For best results make sure surfaces are clean and dry. The '22 in. x 100 ft.' roll ships with a dispenser and the film unfolds to 22 inches (1-5/6 feet). The '63 in. x 19.68 ft.' roll does not ship with a dispenser and the film unfolds to 63 inches (5-1/4 feet). It's always recommended to test tape in inconspicuous place before using; the tape is not recommended for use on wallpaper, unpainted drywall or lacquered surfaces.
- Shurtape FP-96 General Purpose Kraft Packaging Tape
Shurtape FP-96 General Purpose Kraft Packaging Tape is a general purpose paper tape used for packaging, binding, splicing, holding, tabbing, carton sealing, reinforcing, banding and patching for a variety of substrates. Shurtape FP 96 features a strong, flexible and conformable backing with high cross-direction tensile strength. It has an aggressive, high tack adhesive with excellent holding power and excellent quick stick, particularly effective in cold weather. The tape color blends well with cardboard and Kraft cartons and unlike traditional packaging tapes the tape can be torn by hand. Resists curling, abrasion, water, solvents and oil. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape.
- Shurtape CP-632 Colored Masking Tape
Shurtape CP-632 Colored Masking Tape is an economical general purpose tape for use in packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating and identification. Flexible; resistant to water, oil, and solvents; and provides excellent adhesion and release from a variety of substrates. Has multiple uses for home, school, and industry. Has a crepe paper backing and a rubber-based adhesive. Please note Shurtape is starting to phase out their CP-632 masking tape product and as CP-632 stock runs out shipments will start to go out with Shurtape's CP-631 colored masking tape product. The specifications for both tapes are very close and CP-631's specification numbers are currently displayed now for this product. Note: For black masking tape in widths over 2 inches please see JVCC JV497 Masking Tape and for other colors in widths over 2 inches please see JVCC CMT-55 Colored Masking Tape.
- JVCC ART-11 Artist/Board/Console Tape
JVCC ART-11 Artist/Board/Console Tape is a printable flatback paper tape with moderate adhesion. Board tape is good for general purpose packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating, and identification of various items and substrates. Excellent printability (since flat surface of tape as compared to crepe paper). Flexible. Resists abrasion, oil and staining. Adhesive system designed for excellent performance and adhesion to a variety of substrates. NOTE: The manufacturer for this product has discontinued the colors pink and green and limited inventory now remains.
- JVCC PGM-UV Painter's Grade Masking Tape
JVCC PGM-UV Painter's Grade Masking Tape is a masking tape with a specially formulated solvent based acrylic adhesive system that provides clean removal characteristics and UV resistance (up to 14 days of outdoor exposure). JVCC PGM-UV's peel adhesion does not increase with time allowing for removal off a wide variety of surfaces without surface damage. For other blue painters tape products please see Shurtape CP-27 or 3M 2090.
- Shurtape CP-106 Economy Grade Masking Tape
Shurtape CP-106 Economy Grade Masking Tape is an economy grade high adhesion crepe paper masking tape with thermoplastic rubber adhesive. Designed for general purpose packaging, bundling, holding, splicing, masking and labeling for home, school and industry. Offers a patented thermoplastic adhesive that allows a 100% surface contact area to the substrate with clean removal properties. Economical, but with good performance on variety of substrates. Has excellent quick stick and holding power on cardboard plus good low temperature properties. Shurtape CP-106 is a favorite amongst sub and sandwich shops. Note: if you are looking for masking tape in sizes greater than 3 inches wide please see JVCC MT-01.
- Pro Tapes Pro-Artist Artist/Console Tape
Pro Tapes PRO-ARTIST Artist/Console Tape is a flatback paper tape used for marking and masking boards, color coding, and labeling. Artist tape has a repositionable, clean removal adhesive system that does not leave any residue. Printable with flexo-inks, markers, pens, and pencils. Pro-Artist white is pH or acid neutral. The tape removes cleanly from sound and lighting boards and will not stain or ghost after removal. Provides good tensile strength, as well as high edge tear resistance and easy unwind.
- JVCC JV497 Black Masking Tape
JVCC JV497 Black Masking Tape is a crepe paper masking tape with medium adhesion. Flexible paper backing that provides excellent adhesion/release from a variety of substrates. It is good for color coding, arts & crafts, marking, packaging, bundling, holding, binding, splicing, labeling, banding, decorating and identifying. JVCC JV497 is conformable to irregular surfaces, but it is not printable. Please note masking tape including JV497 is thin and fragile so for widths wider than 2 inches please unwind slowly to prevent the tape tearing or breaking; best to apply pressure evenly across the width of the roll when unwinding. JVCC has started getting this tape from Shurtape now (CP-631) so please see updated technical specifications below.
- Nitto (Permacel) P-703 High Temperature Masking Tape
Permacel P-703 High Temperature Masking Tape is primarily intended for high temperature paint masking applications. A premium paper masking tape, Permacel P703 is also designed for general-purpose masking as well as for holding and splicing - especially with difficult-to-hold surfaces such as chemically-treated fabrics. It is resistant to acrylic and alkyd paint solvents and has fair resistance to ketones and highly active polyurethane paint solvents. Features and benefits include: Good high baking temperature characteristics - withstands repeated temperature cycles up to 300°F up to 1-1/2 hours without mass transfer or slivering upon removal - will support Kraft masking paint drapes at baking temperature. Superior aging qualities assure long shelf life. Resistant to stains and solvents; odor-free. Good elongation - maximum conformability around corners and over uneven surfaces. Excellent balance of quick-stick and high-hold. Tape's smoothness and thinness prevent paint build-up along its edges. Doesn't highlight on appliance finishes. Note: Intertape Polymer Group (IPG) is now manufacturing new lots of P-703 for Nitto. For a lower cost alternative please see JVCC MT-02 masking tape. Also if you are looking for a 1-inch white tape which works well on classroom walls please see Shurtape P-665 (Permacel) or JVCC ART-11 white.
- JVCC FPPT-01 Kraft Flatback Paper Packaging Tape
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system. Good for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. Complies with Postal Regulation for Uninsured Packages. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable. This tape is now coming from a different manufacturer so please see the updated tape specifications and the revised color for the tape.
- 3M Scotch 2090 Blue Painters Tape
3M Scotch-Blue 2090 Painters Tape for Multi-Surfaces is a medium adhesion tape ideal for paint masking on multiple surfaces including painted walls and trim, woodwork, glass and metal. It can be removed cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight. 3M Scotch-Blue should NOT be used wallpapers, unpainted wallboard, wood floors or poorly bonded surfaces. 3M 2090 Benefits: Adhesive sticks easily to the surface and stays intact upon removal which reduces labor and rework. Adhesive is light and UV stable. Adhesive has minimal adhesion buildup over time which helps produce high quality results. Crepe paper backing is conformable and offers consistent surface contact for a secure hold. The tape's backing is strong so it removes from surface without tearing, but is still easy to tear. The backing saturant is solvent and moisture resistant so it resists paint bleed-through and the adhesive doesn't transfer when the tape is wet.
- Pro Tapes Pro-Artist-Neon Fluorescent Artist/Console Tape
Pro Tapes PRO-ARTIST-NEON Fluorescent Artist/Console Tape is a flatback paper tape used for marking boards, color coding, and labeling. Artist tape has a repositionable, clean removal adhesive system that does not leave any residue. Printable with flexo-inks, markers, pens, and pencils. Provides good tensile strength, as well as high edge tear resistance and easy unwind. Available in 4 fluorescent blacklight friendly colors: orange, pink, yellow, and green. This tape was recently featured in the October 2008 issue of Martha Stewart Living magazine's "Night Visions" article.
- Shurtape CP-66 Contractor Grade Masking Tape
Shurtape CP-66 Contractor Grade Masking Tape is a paper masking tape designed for commercial and residential painting and construction, industrial masking, holding and packaging. It is a paint and sundries industry standard. Shurtape CP66 is good for applications where conformity to irregularly-shaped surfaces and good quick stick are required. Typical surfaces the tape is used on include windows, metal door jams, and molding and trim.
- Shurtape COL-00 Colonial Premium Grade Masking Tape
Shurtape COL-00 Colonial Premium Grade Masking Tape is used for general purpose masking where a premium performance tape is needed. Conformability, easy unwind, high tensile strength, and flexible backing make it an excellent performing premium tape. The tape also had good quick stick and resists water, solvents and oil. Shurtape Colonial Masking Tape can be used in industrial and automotive paint applications that do not require the use of a bake oven.
- Nashua CleanDrape Double-Sided Sheeting Tape
Nashua CleanDrape Double-Sided Sheeting Tape has a multi-layer cloth & paper construction which provides the strength of a duct tape with the clean removability of a painters masking tape. Used to hang poly sheeting to a variety of surfaces such as wood, glass, aluminum, plastics, and vinyl during painting, sanding, construction, remodeling, mold and asbestos abatement applications. Its blue side offers clean removal for up to 14 days on a variety of surfaces such as drywall. Rubber-based adhesive provides a strong bond to poly sheeting. CleanDrape is also hand tearable and durable like duct tape.
- Shurtape CP-28 30-Day Purple Painters Tape
Shurtape CP-28 30-Day Purple Painters Tape, also known as 30 Day ShurRELEASE, is designed for painting and general purpose applications that require a delicate surface adhesive system or where a low tack, high performance tape is needed. It can be applied to delicate surfaces for up to 30 days and then can be removed cleanly without causing surface damage. Specific applications for Shurtape CP 28 include: wallpaper, freshly painted or unpainted wallboard/drywall, ceiling tiles, or masking for faux finishing. This is the painter's tape we sell with the lowest adhesion. Has an acrylic-based adhesive. Features of Shurtape CP-28 include: Clean removal for up to 30 days. Flexible and conformable. UV resistant.
- 3M Scotch 230 Drafting Tape
3M Scotch 230 Drafting Tape is designed for temporary layup needs, such as holding drawings, tracings, or other papers to blueprints or drawing boards. The tape is conformable and has low tack so it removes easily and cleanly without damaging work. Engineers and architects sometimes refer to this tape as "the second most useful tape in the world" since like duct tape it is very versatile and has many uses. Other uses include labeling and hanging lightweight drawings and posters. If standard masking tape is tearing your work upon removal then this is the tape to look at.
- Shurtape CP-83 Utility Grade Masking Tape
Shurtape CP-83 Utility Grade Masking Tape is a general purpose crepe paper masking tape. It is water and oil resistant and provides good adhesion, excellent quick stick, flexibility and ease of use. Shurtape CP 83 is designed for use in general purpose packaging, bundling, holding, splicing, tabbing and banding applications. It is not recommended for exacting industrial masking, spray painting or oven baking applications.
- Shurtape FP-202 Premium Grade Bleached Flatback Packaging Tape
Shurtape FP-202 Premium Grade Bleached Flatback Packaging Tape is used for splicing and hand and machine carton sealing applications as well as in general purpose applications when a thick paper backing is necessary. Constructed of a heavy duty kraft flatback paper coated with a high tack rubber-based adhesive with excellent quick stick properties. Shurtape FP 202 resists abrasion, water, solvents and oil. When it is used as a carton sealing tape, meets or exceeds requirements for motor freight, railway, air express, air freight, postal shipments and government packaging. Shurtape doesn't call out any USPS specifications specifically on any of their paper carton sealing tapes; however FP-202 does meet the ASTM D5486M specification for PSA box sealing/closures.
- Shurtape CP-500 High Temperature Masking Tape
Shurtape CP-500 High Temperature Masking Tape is ideal for today's high tech transportation industry. Works best in metal preparation, high temperature painting applications and coating. Strips cleanly after baking or extended applications. Used for both the automotive aftermarket and other industrial uses. Typical applications for Shurtape CP-500 include both metal preparation, painting and coating; as well as today's high tech transportation industry (auto, coaches, and buses).
- Intertape Pro-Mask Susan G. Komen for the Cure Pink Painters Tape (Overstock)
Intertape (IPG) Susan G. Komen for the Cure Pink Painters Tape is a masking tape with a specially formulated solvent based acrylic adhesive system that provides clean removal characteristics and UV resistance (up to 14 days of outdoor exposure). The tape is conformable, consistent and offers easy unwind. Resistant to humidity and paint bleed-through. Please note IPG's Paint for the Cause promotion ended for this tape on 7/31/2013; however our converter received in a limited quantity of 1 inch, 1-1/2 inch and 2 inch wide rolls which we've now listed as an overstock sale item.
- Pro Tapes Pro-Measurement Ruler Tape
Pro Tapes Pro-Measurement Ruler Tape is a Kraft paper tape with adhesive backing which can be used as a repositionable ruler. It is a yellow paper tape printed black with markings. It is great for tough situations where a tape measure will not fit. On the Imperial (English) version of the tape every 1/8 of an inch is marked (except on the tape labeled as no lesser increments - for that one only the 1 inch designations are marked) and it is numbered 1 through 12 at each inch designation. It then repeats itself every 12 inches. The 1 inch wide size gives you room off to the side to write, e.g. you can put a strip down and then mark off foot designations at every 12 inches - 1', 2', 3', .... The Metric version of the tape is numbered 1 through 10 at each cm designation. It then repeats itself every 10 cm. There are alternating markings on the Metric tape - for the first 10 cm it is marked at every mm designation and then for the next 10 cm it is marked at every 1/2 cm designation (after the 1/2 cm markings there will be a perforation in the tape and a small gap (about 2mm) before the next run of mm markings begins). Please note that because paper tape elongates a bit it will stretch over longer distances. It is perforated every 12 inches because for each foot it will be very close, but for longer measuring runs you may need to match it up with a metal tape measure to be sure when it is laid down it isn't stretched at all or the tape can be un-perforated and each foot laid down to match.
- JVCC PRE-MASK-1 Premask Application Tape
JVCC PRE-MASK-1 Premask Application Tape is a 5.3 mil natural color transfer premask. Translucent saturated paper with a rubber resin based pressure-sensitive adhesive. It is fully compatible for plotter cuts and thermal die cuts of all size die cuts and vinyl lettering. Pre Mask is used to transfer cut vinyl graphics from their release liner to another surface. The tape protects the graphics from scratches during installation and allows quicker application since the cut graphics will not move during installation. Has medium tack which is ideal for most transfer applications and it has good resistance to abrasion and moisture. Please note this tape only has adhesive on one side; it is not a double-sided tape.
- Pro Tapes PRO-46 Colored Masking Tape
Pro Tapes PRO-46 Colored Masking Tape is a rubber based colored crepe paper tape. It is used on a variety of smooth substrates as a printed or unprinted general purpose tape. Pro 46 can be used for packaging, bundling, binding, holding, splicing, banding, labeling, color coding, decorating and identification. The tape is printable and flexible; it can adhere to a variety of smooth substrates; and it resists water, solvents and oil.
- Shurtape CP-27 14-Day Blue Painters Tape
Shurtape CP-27 14-Day Blue Painters Tape is also known as 14-Day ShurRELEASE Professional Grade Crepe Paper Masking Tape. Shurtape Blue Painters Tape can be used on glass, vinyl, metal, wood, painted walls and trim where clean removal is required after and up to fourteen days of exposure to direct sunlight. It is NOT recommended for use on wallpaper, unpainted wallboard, ceiling tile or with uncured coatings. For delicate surfaces like wallpaper, drywall and ceiling tile use Shurtape CP-28. Shurtape CP 27 has excellent 14-day UV resistance and good performance for a variety of applications that require easy removal. NOTE: The 1/2 in. width requires a 1 case minimum order since special setup is required to custom cut and rewind rolls from existing Shurtape CP-27 2 in. rolls. Delivered rolls will be on a plain white core.
- ISC RTMT Blue Hi-Temp Masking Tape
ISC Racers Tape Blue Hi-Temp Masking Tape is a masking tape used for autobody automotive work (not your standard blue painters tape). It is engineered for the racing fabrication industry and is designed to be residue-free even under extreme conditions. ISC's Blue Hi-Temp Masking is ideal for use in painting, metal fabrication and powder coating in the racing and marine industries.The tape can resist a range of temperatures, up to 250 °F for 30 minutes (suitable for medium temperature paint bake operations). Even when subject to high temperatures, a cured rubber adhesive system allows for clean removal from metal, rubber, plastics and other surfaces and still results in sharp paint lines. The tape is conformable to irregular surfaces and it resists solvents and moisture to minimize paint bleed-through and rework. It is also compatible with solvent and latex based paints and its strong crepe paper backing (which is treated with heat and solvent resistant saturant) resists tears and silvers.
- JVCC CMT-55 Colored Masking Tape
JVCC CMT-55 Colored Masking Tape is a saturated crepe paper masking tape designed for color coding for identification and differentiation applications. The tape is not printable, but is conformable to many irregular surfaces. It is also suitable for bundling, holding, splicing, banding, decorating, the marking of defective parts or materials, produce marking and polybag sealing. Note: Please see JVCC JV497 for black masking tape cut to non-standard widths.
- FrogTape Delicate Surface Painters Tape
FrogTape Delicate Surface Painters Tape is a low-adhesion painters tape designed for use on: Freshly painted surfaces (24 hours old) Faux finishes Primed wallboard / sheetrock Wallpaper Finished wood (Polyurethane, Stain) Veneer, laminate and vinyl FrogTape Delicate surface will remove cleanly from most surfaces for up to 60 days. It's recommended to test before use on all surfaces including those with texture. Patented PaintBlock® Technology is what makes it different from other painter's tapes. This technology prevents latex paint from bleeding by forming a micro-barrier along the edges (it reacts with the water in latex paint). You get a fully sealed tape edge resulting in the sharpest paint lines possible. PaintBlock® is Superabsorbent Polymer (SAP) which absorbs and retains large amounts of a liquid relative to its own mass - it is used in many everyday items, including baby diapers. As with any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape. Application Instructions for FrogTape: Clean the surface to be masked. Make sure it is dust-free and dry. If the surface has been recently painted, make sure the paint has cured. For accurate placement, adhere FrogTape in short sections to avoid stretching the tape. Make sure FrogTape is flush to the edge that you will be painting. Using a putty knife or 5-in-1 tool, press the tape you laid to burnish it to the surface you are masking. Removal Instructions for FrogTape: Remove the tape immediately after you are finished painting. This will help prevent paint from bridging over the tape and tearing when you remove it. When latex paint begins to dry, it becomes rubbery (like a rubber band) and has a tendency to pull. Remove the tape slowly and pull at a 90-degree angle. If the new paint does begin to tear, gently score the edges with a razor blade. If the tape begins to tear the wallboard when it is being removed, this likely means you have masked on a poorly bonded surface. Try softening the tape's adhesive with a blow dryer. Note: See the commercial for Frog Tape at http://www.frogtape.com
- FrogTape Multi-Surface Painters Tape
FrogTape Multi-Surface Painters Tape is a medium-adhesion painters tape designed for use on: Cured painted walls Unfinished wood and wood trim Glass Metal Stone FrogTape Multi-surface will remove cleanly from most surfaces for up to 21 days and 7 days in direct sunlight. It's recommended to test before use on all surfaces including those with texture. Patented PaintBlock® Technology is what makes it different from other painter's tapes. This technology prevents latex paint from bleeding by forming a micro-barrier along the edges (it reacts with the water in latex paint). You get a fully sealed tape edge resulting in the sharpest paint lines possible. PaintBlock® is Superabsorbent Polymer (SAP) which absorbs and retains large amounts of a liquid relative to its own mass - it is used in many everyday items, including baby diapers. As with any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape. Application Instructions for FrogTape: Clean the surface to be masked. Make sure it is dust-free and dry. If the surface has been recently painted, make sure the paint has cured. For accurate placement, adhere FrogTape in short sections to avoid stretching the tape. Make sure FrogTape is flush to the edge that you will be painting. Using a putty knife or 5-in-1 tool, press the tape you laid to burnish it to the surface you are masking. Removal Instructions for FrogTape: Remove the tape immediately after you are finished painting. This will help prevent paint from bridging over the tape and tearing when you remove it. When latex paint begins to dry, it becomes rubbery (like a rubber band) and has a tendency to pull. Remove the tape slowly and pull at a 90-degree angle. If the new paint does begin to tear, gently score the edges with a razor blade. If the tape begins to tear the wallboard when it is being removed, this likely means you have masked on a poorly bonded surface. Try softening the tape's adhesive with a blow dryer. Note: See the commercial for multi-surface Frog Tape at http://www.frogtape.com
- JVCC HTM-01 High Temperature Masking Tape
JVCC HTM-01 High Temperature Masking Tape is a premium masking tape with a solvent based cured natural rubber based adhesive system designed to work in masking applications where elevated temperatures and solvent resistance are required. Tape can be used up to 230°F for up to one hour while maintaining integrity, holding power, and clean removal characteristics. JVCC HTM-01 conforms to a broad range of surfaces. Use of this heavy crepe paper tape provides good tensile strength and tear characteristics as well as excellent elongation for wrapping an masking around curved surfaces. Recommended for high demand painting and masking applications; especially automotive masking applications.
- Duck Brand Freezer Sealing Tape
Duck Brand Freezer Tape is used with your favorite freezer paper to help save and protect your favorite meats, vegetables and other bakery goods until you're ready to use them. The tape is hand-tearable and its surface is writable with marker or pen which helps for listing contents and date. To use you should place your food in the center of your freezer paper (waxy side in) and then wrap the paper around the food. Then seal the paper with Duck Freezer Tape by wrapping it completely around the contents of the freezer paper. You should not place your food in direct contact with the tape. Unlike standard paper masking tape Freezer Tape stays adhered well in low freezer temperatures when wrapped around the contents of freezer paper.
- Shurtape CP-60 60-Day Razor Edge Painters Tape
Shurtape CP-60 60-Day Razor Edge Painters Tape, also known as 60 Day ShurRELEASE, is an ultra thin painter's tape used to create razor sharp lines. It leaves only the sharpest, cleanest lines - perfect for painting stripes, diamonds, and other patterns on walls. It is perfect for striping. With a low tack adhesive, it removes cleanly from delicate surfaces and won't damage painted drywall or faux finishes. Its special paper backing reduces bleed-through. Shurtape CP 60 has an acrylic-based adhesive and it designed for the professional paint market. The tape's low adhesion allows it to be easily removed after longer periods of time.
- 3M Scotch 05916 Welding and Spark Deflection Paper Tape
3M 05916 Welding and Spark Deflection Paper Tape is a flame-retardant, repositionable, adhesive-backed paper product used to protect vertical surfaces from damage caused by welding spatter and grinding sparks. It suppresses burning from welding spatter and grinding sparks and can be adjusted after initial installation to insure correct position. It offers low-cost but vital protection. 3M 05916 protects automotive glass and light fixtures, painted sheet metal, other damageable vertical surfaces from spatter and sparks. The product is NOT designed for installation on horizontal surfaces, such as roofs, decklids, hoods, carpeting on floorboards since it is not designed to prevent heat transfer from sparks or spatter that are allowed to sit in one position on the paper, these will burn through.
- Shurtape CP-64 Premium-Grade Colored Masking Tape
Shurtape CP-64 Premium-Grade Colored Masking Tape is a printable colored paper tape which offers higher adhesion than a standard colored paper masking tape. For use on smooth substrates in applications such as packaging, bundling, holding, splicing, labeling, color coding, decorating and identification. This printable product is resistant to water and oil.
- JVCC MT-01 Economy Grade Masking Tape
JVCC MT-01 Economy Grade Masking Tape is a general purpose utility grade crepe paper masking tape. It conforms to a broad range of surfaces. JVCC MT-01 Masking Tape is used for sealing, holding, light bundling, packaging, splicing, masking, and labeling for home, school, and industry. NOTE: if you are looking for the most economically priced masking tape we currently carry in pre-cut sizes from 1/2 inch to 3 inches please see Shurtape CP-106.
- Shurtape CP-743 Matte Black Paper Tape (aka Permacel P-743)
Shurtape CP-743 Matte Black Paper Tape is a photographer's matte black masking tape. It features an opaque, matte surface for light-free masking and has high quick stick & adhesion when reproducing photographs. Shurtape CP743 Paper Tape is used for photographic reproduction work: cropping and edging negatives; positioning negatives for contact printing; redacting legal documents prior to copying; and sealing camera bellows and film holders against light leaks. Reliable tape for use in photo studios, film processing laboratories, as well as in home dark-rooms. CP743/P743 Masking Tape is also recommended for use as a chart tape. It features an easy, consistent unwind and is hand tearable. Also because CP-743 features a clear adhesive no white will be visible when looking at the tape from the side unlike a gaffers tape which has white adhesive which can sometimes be partially visible when looking at the tape from that angle. It is now manufactured by Shurtape and used to be referred to as Permacel P-743.
- Intertape PS1 Premium Paper Flatback Tape
Intertape PS1 Premium Paper Flatback Tape has a royal blue heavy-duty saturated paper flatback backing, a non-printable release coat, and a pressure-sensitive synthetic rubber/resin adhesive. Royal blue color provides easy identification of splices, even in high speed operations. Manufactured to perform under a wide range of humidity and temperature conditions up to 400°F. Intertape PS1 provides excellent adhesion to flooring materials and heavy kraft surfaces. Offers a positive splice under constant web tension; e.g. belt sander splices. Also works well on PE coated liquid boxboard. Automotive grade / stain resistant adhesive. Used also for holding, mild to medium grit blast, and as paint adhesion (cross-hatch) test tape. Product is not repulpable.
- Shurtape CP-20 8-Day Green Painters Tape
Shurtape CP-20 8-Day Green Painters Tape is also known as 8-Day ShurRELEASE Professional Grade Crepe Paper Masking Tape. It is used for masking of painted surfaces, wood and metal and also to hold plastic or paper drop cloths. Shurtape Green Painters Tape removes cleanly from painted wood, glass, painted sheetrock and metals for up to 8 days. UV resistant, flexible and conformable with high shear strength for secure hold. Resists paint bleed through. Not for use in lacquer applications or on anodized aluminum.
- 3M Scotch PT2090 Ready Mask Pre-Taped Drop Film
3M PT2090 Ready Mask Painters' Pre-Taped Drop Film is pre-taped drop film applied with Scotch® 2090 Long-Mask™ Tape. It is pre-folded high density plastic drop cloth with 3/4"-wide tape to adhere to a surface. It protects surfaces from paint splatters, drips, and over sprays. The tape is ideal for long-term masking projects when tape must be left on for up to 14 days. It removes cleanly and easily without leaving adhesive residue (even in direct sunlight). It is a medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal. NOTE: This tape has been discontinued and no inventory now remains. Please see Duck Brand Pre-Taped Dropcloth Pre-Taped Painter's Drop Film as an alternative.
- Intertape PF3 Colored Masking Tape
Intertape PF3 Colored Masking Tape is a masking tape used for color coding and other identification purposes. It is stain and solvent resistant. No stock now remains for the specially priced overstock 3/8" red.
- JVCC MT-SALE Industrial Grade Masking Tape (2" Overstock Cases)
JVCC MT-SALE Industrial Grade Masking Tape is a 2" overstock crepe paper masking tape from a major manufacturer which comes on a white cardboard core and is available for sale by the case only. It is a good economical tape which is solvent-resistant crepe paper coated with a natural rubber adhesive specifically designed for paint masking applications up to 250°F. The adhesive removes cleanly from a surface without leaving residue or ghosting behind. It is also designed for general-purpose masking as well as for holding, sealing and splicing wherever stain and transfer resistance is desired. The crepe paper backing on the tape also provides elongation required to mask around tight curves. NOTE: The overstock masking which was rewound on to a white core is sold out now, but the same tape is available on a standard neutral core via the JVCC MT-02 product.
- Shurtape MX-200 Pre-Taped Drop Film
Shurtape MX-200 Pre-Taped Drop Film is contractor professional-grade pre-taped drop film applied with Shurtape CP-27 14-Day ShurRELEASE Blue Painters Tape. It is film with instant static cling with 3/4"-wide CP-27 UV tape to adhere to a surface. It protects surfaces from paint splatters, drips, and over sprays. Excellent for indoor/outdoor use where ultra-violet resistance is desired and easy to use for professional contractors and do-it-yourselfers. The tape can be used on glass, vinyl, metal, wood, painted walls and trim. The tape is not recommended for use on wallpaper, unpainted wallboard, ceiling tile or with uncured coatings. NOTE: Shurtape has discontinued their MX line of products; please see 3M PT2090 as an alternative.