- 3M Scotch 700A ATG Applicator Adapter
3M Scotch 700A ATG Applicator Adapter allows 3M's 700 ATG Applicator to be used with 1/4" ATG tape.
- JVCC ATG1 ATG Tape Dispenser
JVCC ATG1 ATG Tape Dispenser is a hand held tape dispenser for ATG tape. The dispenser/applicator will automatically wind up the liner on your ATG tape during use. It will accommodate both 1/2 inch and 3/4 inch rolls of ATG tape (it accepts 1/4 inch ATG tape also although rolls may slide around a bit on the spool since the spool is wider than the tape; however some people find it not to be an issue). All of the ATG tapes we sell will fit in the ATG1 dispenser. JVCC gets this dispenser from Shurtape and it also goes by the model name/number Shurtape SD-950. The dispenser color will either be blue, red, teal or orange depending on the color of the last lot received in.
USAGE NOTES: Start by putting the roll of tape on the spool in the middle of the gun with the tape running down clockwise (make sure the roll snaps down on to the spool so that if you pull on the tape the roll does not spin freely on the spool unless you are also holding the trigger down). It then runs on top of the roller closest to it and then under the roller in the front of the gun. During usage the adhesive gets applied at the point of the front roller so when you are first loading the gun remove any adhesive off the liner by hand at this point so only the liner then comes back over the roll which is on the main spool in the middle of the gun and then runs under the liner take-up spool (secure the liner in one of the slits in that spool). Then hold the trigger down when applying the tape (it allows the spools to turn). To stop applying let go of the trigger and pull the dispenser away.
- JVCC EX-17 Steel Desk Top Tape Dispenser
JVCC EX-17 Steel Desk Top Tape Dispenser is a high-quality steel desk top dispenser used for tape on a 3 inch diameter core. The maximum outside roll diameter the dispensers can hold is 5 inches so it works great for office supply tapes such as Permacel J-LAR and JVCC CELLO-1. It also works with film carton sealing packaging tapes such as Shurtape HP-500 and JVCC OPP-20C and paper console tapes such as JVCC ART-11. Please note that the diameter of full length cloth tapes such as gaffers and spike will be too large to fit into the dispenser. The JVCC EX-17 dispensers come with a weighted-rubber lined base so you can remove the liner to allow it to adhere to a work surface or leave the liner on if you do not want to mount it. Different dispenser sizes are available for 1", 2" and 3" wide tapes (the 3" dispenser has three 1" rollers so you can use it for one 3" roll of tape or for individual 1" wide rolls).
- 3M Scotch 700 ATG Adhesive Applicator
3M Scotch 700 ATG Adhesive Applicator allows with the touch of the finger quick, controlled application of strips of ATG pressure-sensitive adhesive tape. Bond lines are thin. No mess or clean-up. The ATG acrylic adhesive flows into surface irregularities to join, mount or laminate.
- Powerseal 7605K Bag Sealing Tape Dispenser
Powerseal 7605K Bag Sealing Tape Dispenser is a tape dispenser/bag sealer with trimmer for tape up to 12mm wide (which is approximately 1/2 inches) on a 3-inch diameter core. The dispenser can be used to seal produce bags, bakery products, candy items, floral arrangements, industrial parts, newspapers and hardware.
- Excell 808K Bag Sealing Tape Dispenser (Wide Neck)
Excell 808K Wide Neck Bag Sealing Tape Dispenser is a tape dispenser/bag sealer with trimmer for tape up to 15mm wide (which is approximately 5/8 inches) on a 3-inch diameter core. The wider neck is great for heavy mil bags. The dispenser can be used to seal produce bags, bakery products, candy items, floral arrangements, industrial parts, newspapers and hardware. All steel taper with sturdy base and trimmer. Twist bag mouth shut and move through slot to seal.
- 3M Scotch 714 1/4" ATG Adhesive Applicator
3M Scotch 714 1/4" ATG Adhesive Applicator allows with the touch of the finger quick, controlled application of strips of ATG pressure-sensitive adhesive tape. Covered gears minimize applicator jams. Transparent cover shows remaining tape. Holds up to 60 yards of 1/4" ATG tape. Bond lines are thin. No mess or clean-up. The ATG acrylic adhesive flows into surface irregularities to join, mount or laminate.
- JVCC EX-91 Desk Tape Dispenser
JVCC EX-91 Desk Tape Dispenser is a plastic tape dispenser used for tape on either a 1 inch or a 3 inch diameter core. The maximum roll diameter the dispensers can hold is 5 inches so it works great for office supply tapes. The dispenser can hold a roll of tape up to 1 inch in width.
- JVCC EX-66 Filament Strapping Tape Dispenser
JVCC EX-66 Filament Strapping Tape Dispenser has a metal frame and is for tape on a 3" core. Different dispenser sizes are available for 1", 2" and 3" wide tapes. The maximum roll diameter the dispensers can hold is 5-1/2 inches. Metal construction.
- JVCC LPD-00 Table Top Label Protection Tape Dispenser
JVCC LPD-00 Table Top Label Protection Tape Dispenser is used to dispense label protection tape on a 3 inch diameter core and with a maximum roll diameter of 6-1/2 inches. 2 dispensers are available: one for tape up to 4 inches wide and one for tape up to 6 inches wide. Plastic construction.
- JVCC CSD Carton Sealing Tape Dispenser
JVCC CSD Carton Sealing Tape Dispenser is a hand held durable tape dispenser for carton sealing tapes. Features include side loaded, adjustable break, anti-reverse bar, rubber roller, blade safety guard and a wipe down plate. Two sizes are available - one for tapes up to 2 inches wide and one for tapes up to 3 inches wide. The maximum outside diameter of the rolls it can hold is 5 inches.
- JVCC LMD4 Aisle/Lane Marking Tape Dispenser
JVCC LMD4 Aisle/Lane Marking Tape Dispenser is a dispenser used to mark floors with vinyl tapes up to 4 inches wide on a 3 inch diameter core (accommodates rolls up to a maximum outside diameter of 6 inches). The dispenser is accommodating enough to lay down curves (to lay down a completely straight line you would want to trace along another object like a two by four). It is pre-assembled and individually cartoned. Metal construction.
- JVCC 925DC Double Coated Tape Dispenser
JVCC 925DC Double Coated Tape Dispenser is a hand-held tape dispenser for double-sided tapes (when adhesive is on both sides of the tape). Helps to apply tape to working surfaces while rewinding the liner on the take-up spool. Heavy formed steel frame for long life. Adjustable tension brakes on tape roll holder and scrap rewind spool insure proper performance with any tape weight. Has a serrated blade attached to the dispenser. This dispenser is not recommended for thick, difficult to cut tapes such as double-coated cloth/carpet tapes. Holds rolls up to 2" wide with maximum 5-1/2" diameter on 3" core.
Usage tips for the Double-Sided Tape Dispenser: take the tape's release liner around the rubber roller *before* the knife so it will not get cut. The tape goes over the knife up to the small roller on top, the liner bends around the larger roller, under the knife and back to the wind-up. You also have to adjust tensions on the unwind and wind up until it works correctly since every type of tape requires a different adjustment.
