- ISC 3500 Jessup Safety Track [Rubberized Non-Skid Tape & Cleats]
ISC 3500 Jessup Safety Track Tape & Cleats are rubberized, textured non-slip tape designed for heavy shoe traffic, yet they are comfortable enough for bare feet. This resilient medium grade non-slip product provides unparalleled coefficient of friction in both industrial and commercial environments. It is coated with an aggressive adhesive and the tape is easily cleaned and mop-friendly. It is made by Jessup and when shipped in roll format they are branded by ISC on one of their Racers Tape cores. Uses for this non-skid tape include: Steps, stairs, and platforms. Recreational vehicles, motorcycles, snowmobiles, ATVs, garden tractors and lawn mowers. Ladders, step stools and scaffolds. Boats, skateboards, water skis, surf boards and jet skis. Swimming pools, pool accessories and diving boards. Lap desks (helps to provide a more frictioned surface if your laptop has a tendency to not stay in place or slide off). Conveyors and pulleys. ISC Jessup 3500 is not coated with an adhesive that can be submerged or put underwater. So if when applied there is any gaping which would allow water to seep underneath to the underside of the tape water would degrade the adhesive pretty quickly.
- JVCC Sure Step Anti-Slip Cleat
JVCC Sure Step Anti-Slip Cleat is a high traction, anti-slip, waterproof, flexible cleat coated with an aggressive pressure-sensitive adhesive. JVCC Sure-Step is used indoors or outdoors; on skateboards, ladders, walkways, steps, ramps and stairways; in machine shops and work areas. Helps comply with OSHA 1910.263(3). Product will be sent rolled in packaging.
- JVCC NS-2A Premium Non-Skid Tape
JVCC NS-2A Premium Non-Skid Tape is a premium 32 mil 60 grit silicone carbide high traction, anti-slip tape. This non-skid tape has a waterproof backing and is coated with an aggressive acrylic adhesive (more permanent than a synthetic rubber adhesive). JVCC Non-Skid Tape is used indoors or out on stairs, pool areas, ramps, work areas, skateboards and garage steps. The 60 grit silicone carbide surface is similar in feel to 60 grit sandpaper therefore it is not appropriate for bare feet. NS-2A complies with OSHA 1910.263(3). Also please note the semi-transparent/translucent color is only partially transparent while the white color is completely opaque. For bare feet please see a rubberized non-skid tape like the ISC 3500 Jessup Safety Track. JVCC NS-2A is not coated with an adhesive that can be submerged or put underwater. So if when applied there is any gaping which would allow water to seep underneath to the underside of the tape water would degrade the adhesive pretty quickly. Also the substrate it is applied to must be dry, in good condition, and free of any debris when the tape is applied so the adhesive bond can form correctly.
- Wooster Flex-Tred Anti-Slip Cleats
Wooster Flex-Tred Anti-Slip Cleats provide a highly visible self-adhesive non-skid safety surface. They can be applied anywhere on any clean, dry, smooth,solvent-free surface where safety is required. The cleats help meets OSHA requirements by reducing the possibility of an accident by falling or slipping. They also provide outstanding slip resistance, appearance, flexibility and durability. Wooster Flex-Tred cleats meet or exceed MIL-D-17951E (ships), Motor Vehicle Safety Standard No. 302 (passenger vehicles) and MIL-W-5044C (aircraft) and are non-combustible as tested under Federal Test Standard No.501a, Method 6411. Product will be sent rolled in packaging.
- Wooster NiteGlow Flex-Tred Glow-in-the-Dark Anti-Slip Tape and Cleats
Wooster NiteGlow Flex-Tred Glow-in-the-Dark Anti-Slip Tape and Cleats provide a photoluminescent non-skid surface which is visible to the night-adjusted eye for hours after being recharged by any light source (natural or artificial). In its uncharged state the tape has a white/cream color and when glowing the tape has a luminescent lime green color. To the night-adjusted eye it is visible, but it would not compare in brightness to say a standard flashlight. Wooster NiteGlow is self-adhesive and can be applied anywhere on any clean, dry, smooth, solvent-free surface where safety is required. Provides pedestrian safety and guidance in evacuations. Use on leading edge of steps, around landings and through hallways and doorways. Helps meets OSHA requirements by reducing the possibility of an accident by falling or slipping; they provide outstanding slip resistance and have excellent durability. They meet or exceed MIL-D-17951E (ships), Motor Vehicle Safety Standard No. 302 (Passenger Vehicles) and MIL-W-5044C (aircraft) and are non-combustible as tested under Federal Test Standard No.501a, Method 6411. Please note the cleats will be sent rolled in packaging. Also the 10 ft. long rolls are rewound from 60 ft. rolls so are shipped on a plain white core.
- JVCC NS-S Non-Skid Strips
JVCC NS-S Non-Skid Strips are high traction, anti-slip, waterproof strips coated with an aggressive pressure-sensitive adhesive. Non-Skid Safety Strips are used to prevent slipping when walking in hazardous places. ideal for steps, ladders, swimming pools and skate boards. Helps comply with OSHA 1910.263(3). There are 10 strips in each pack.
- JVCC NS-C Non-Skid Cleats [Glow & Reflective]
JVCC NS-C Non-Skid Cleats are an adhesive-backed high traction, anti-slip cleat which helps to prevent injuries from slipping and falling. It offers a convenient method to reduce slippery floors & stairs and provide better traction on shower/bath bottoms. Areas for use also include: balcony, kitchen, school, factory, skateboard, ramps, walkways, stairs, bathroom and marine docks. JVCC NS-C has chemical splash and water resistance which is applicable to marine applications. Current options available include a black cleat with a photoluminescent glow-in-the-dark stripe; and also a black cleat with both a photoluminescent glow in the dark stripe plus a black and yellow alternating reflective stripe. Cleats are easy to apply and helps to comply with OSHA 1910.263(3). Product will be sent rolled in packaging.
- ISC Non-Skid Anti Slip Tape
ISC Non-Skid Anti Slip Tape is a heavy-duty, long lasting, non skid tape used to prevent slipping and falling by providing an anti-slip safety surface, defiant to all weather conditions. This is made from high traction silicon carbide grit Jessup 3200 Safety Track material. Instant and self-adhesive so there are no messy glues or separate adhesives, just easily peel off the backing and apply to any clean dry surface. Uses & Applications trailer ramps steps & ladders racing brake & clutch pedals entrances kitchens, stairs & walkways dock areas around work benches etc.
- JVCC NS-1 Non-Skid Tape
JVCC NS-1 Non-Skid Tape is a high traction anti-slip, waterproof, non skid tape coated with an aggressive synthetic rubber adhesive on one side and a heavy duty abrasive on the other. JVCC NS1 is used indoors and outdoors on stairs, ramps, walkways, and pool areas.