- ISC X-Flex Crash Repair Racers Tape
ISC X-Flex Crash Repair Racers Tape is a large sheet of crash repair tape designed for that quick racing repair to get your car back on the track after an accident. Unlike other body repair patches, X-Flex is reinforced with a layer of aluminum, making it very durable and strong. This tape is widely used in the Sprint Cup, Nationwide, and Camping World Truck series races. X-Flex Racers Tape has a highly aggressive butyl rubber adhesive that will adhere to any clean surface. X-Flex comes in either 11 inch x 15 inch patches for short track or in 11 inch x 30 inch patches for NASCAR. Available colors are black, white, blue, yellow and red. Please note since X-Flex is paint applied to a reinforced aluminum backing you will sometimes see areas of the silver aluminum underneath the paint. These patches are designed for short-term patch repair however and during that time should still look aesthetically pleasing. Also, the wide width aluminum/butyl rubber combo is extremely difficult to work with and causes wrinkles and gaps in the release liner when the liner is put back on to the tape after the aluminum backing is painted, but it should not affect the performance of the product.
- Nashua 360-45 Heavy Duty FoilMastic Butyl Rubber Tape
This is a heavy-duty rubber tape that has so many uses you'll want to keep some close at hand. Nashua 360-45 Heavy Duty FoilMastic Butyl Rubber Tape is made from 2-mil dead-soft aluminum foil backing with 45-mil butyl rubber mastic adhesive. Nashua 360-45 foil butyl tape is a waterproofing repair tape that can be used to seal low, medium and high pressure indoor or outdoor HVAC duct systems. This includes flexible duct, fiberglass duct, and metal duct systems. FoilMastic butyl rubber tape is also recommended for repairing everything from trailer panels to shipping containers and more. It's effective as a heavy-duty rubber tape for air leaks on sprinkler systems. Using this rubber tape to fix ducts helps to reduce circulating pollutants and improve indoor air quality. Please note that Nashua 360-45 and Polyken 360-45 are the same product manufactured by Berry Plastics. Therefore the tape roll core may be branded with Nashua or Polyken, depending on current inventory. Features and Benefits Permanent sealant Provides instant water tight bond Exceptional adhesion to most materials Conforms to various surfaces Heavy duty all-weather foil coated butyl mastic Non-staining adhesive 2-mil foil backing can be painted (use as a caulk alternative) Resists cold, heat, sunlight and water Release liner for easy installation Printed for fast identification Can be used on galvanized materials Low VOC content; can help to satisfy EQ Credit 4.1 under LEED® requirements (Low Emitting Materials, Adhesives & Sealants) Product Applications For sealing: Seams and cracks in gutters, eaves, roof alleys, hips and ridges Around vent stacks and chimneys Rooftop duct systems Leaks in cars, trucks and vans Around roof installations for small satellite dishes Stone and metal sealing, even in cold weather For repairing: Mobile homes Gouges, tears and rips in trailer metal panels Metal buildings Shipping containers Poorly sealed connections Ducts (lower utility bills, burn less fuel, improve air quality)
- Pro Tapes Pro Flex Patch & Shield Tape
Pro Tapes Pro Flex Patch & Shield Tape is an extremely durable, flexible, all-weather butyl-backed adhesive tape, specially made for reliable repairs. This heavy-duty, VOC-free tape is UV resistant for superior long-term performance. It conforms well and can be used to stop leaks in many materials such as metal surfaces and in roofing. It also adheres well to timber. Once surface is clean and dry, this Pro Flex tape applies easily. Product Applications Effectively stops leaks in and makes repairs to: Metalized surfaces Roofing materials RVs, mobile homes, rail cars, vans and trucks Gutters Garden sheds Windows Tarpaulins Gel cushion floor mats Certain kinds of unpressurized pipes Below grade concrete wall penetrations for water Flashing of a deck joist Rubber dust covers on automobiles Chimney flashing Motorcycle saddle bag Other uses: Seal glass to asphalt shingles Seal links in plastic downspout Many other household projects
- Nashua 360-17 FoilMastic Butyl Rubber Tape
Nashua 360-17 FoilMastic Butyl Rubber Tape is a printed, 2 mil dead-soft aluminum foil backing with a 15 mil butyl rubber mastic adhesive. It is a waterproofing repair tape used for indoor or outdoor sealing of low, medium & high-pressure HVAC duct systems (includes: metal duct, fiberglass duct and flexible duct systems). It seals cracks and seams in gutters, roof alleys, eaves, hips and ridges and seals around chimneys and vent stacks. You can use Nashua 360-17 to repair gouges, rips, tears in metal panels of trailers, shipping containers and metal buildings. Also used to seal leaks in vans, cars, and trucks and for mobile home repair. Use duct mastic to mend poorly sealed connections, improve indoor air quality (since fewer pollutants circulating), lower utility bills, and burn fewer fossil fuels. SMACNA A, B, and C Seal Classes. UL 723 classified. Low VOC content and can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED®. Please note that Nashua 360-17 and Polyken 360-17 are the same product manufactured by Berry Plastics. Therefore the tape roll core may be branded with Nashua or Polyken, depending on current inventory. Features & Benefits Permanent sealant. Provides instant water tight bond. Acceptable for use on galvanized materials. Heavy duty all weather foil coated butyl mastic. Excellent adhesion to all surfaces. Extremely conformable. Non-staining adhesive. Paintable 2 mil foil backing (use in place of caulk). Excellent resistance to cold, heat, water, and sunlight. Printed for easy identification. Release liner provides ease of installation.
- 3M Scotch 4411 Extreme Sealing Tape [40 mil]
3M Scotch 4411 Extreme Sealing Tape is a highly conformable single-side acrylic tape with a high-performance ionomer backing which is designed for difficult sealing applications. The backing on this tape is an ionomer film that is very tough yet flexible and abrasion resistant. The very soft and thick acrylic adhesive has excellent sealing properties and good outdoor durability. This single coated tape is designed to seal over an existing joint, seam, or penetration. The adhesive used in 3M Scotch 4411 is designed to adhere well to the ionomer film so that overlapping tape joints can be made while maintaining a strong seal. The tape gives you consistent thickness over using a liquid adhesive. Used for motorhome leaks, roof and gutter holes / tears, and the transportation industry. Comes on a release liner on the non-adhesive side to allow for easier unwind. Please note the translucent color is almost white because of the thickness of the tape. Features and Benefits Sticks on contact to many metals and plastics without drying time, dripping, oozing and clean up Excellent high-pressure water, moisture, and thermal shock resistance Durable Clear appearance and paintable Application Instructions It is often required to overlap 3M Extreme Sealing Tape onto itself. In this case, the ionomer backing of the first piece is one of the substrates to which the second piece of tape is bonding. The tapes should overlap at least 3/4 inch. The ionomer does not need to be cleaned prior to bonding unless it has been contaminated with oil, dirt, grease, etc. If the bonding area of the ionomer has been contaminated, IPA/water can be used to clean the surface. A quick wipe of 3M 111 Adhesion Promoter on the ionomer is suggested for best performance of the overlapping tape. AP111 will approximately double Extreme Sealing Tape’s adhesion to its own ionomer backing. Firm pressure should be applied to all points of overlap between the two tapes to join the adhesives and create a robust seal.
- Nashua 367-17 FoilMastic Butyl Rubber Sealant Tape [UL 181B-FX listed]
Nashua 367-17 FoilMastic Butyl Rubber Sealant Tape is a UL 181B-FX listed 2 mil dead-soft aluminum foil tape coated with 15 mils of butyl rubber mastic adhesive. Used for indoor and outdoor sealing of low, medium, and high pressure HVAC systems including sheet metal and flexible duct systems. Also to seal cracks and seams in gutters, sheet metal roofing and trailers; plus for basic sheet metal repairs. Features & Benefits Aggressive butyl mastic adhesive Provides instant water and air-tight seal Resistant to moisture and solvents Performs to SMACNA 0.5", 1", 2", 3", 4", 6" up to 10" w.g. pressure classes and seal classes A, B, and C. Conformable foil backing: easy to use in tight spaces; conforms easily to round, square or odd-shaped objects. UL 181B-FX Listed: meets code requirements and can contribute toward requirements for EA Credit 1 (Optimize Energy Performance) under LEED®. Low VOC Content: can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED®. Shows excellent resistance to mold growth, humidity, flame spread, smoke generation, and the effects of high temperatures. Please note that Nashua 367-17 and Polyken 367-17 are the same product manufactured by Berry Plastics. Therefore the tape roll core may be branded with Nashua or Polyken, depending on current inventory.
- Nashua 361-11 Waterproofing Repair Tape
Polyken/Nashua 361-11 Waterproofing Repair Tape is a tape with an aluminum foil backing/carrier which is coated on one side with a permanent butyl rubber adhesive. The tape forms a permanent seal with excellent adhesion to all surfaces. Nashua 361-11 is also extremely conformable and resistant to cold, heat, water, and sunlight. Its silver foil backing is paintable which helps match surfaces. Typically used for indoor and outdoor sealing and repair of gutters, roof alleys, eaves, hips, and ridges. Nashua 361-11 Waterproofing Repair Tape can also repair seams and seal leaks, rips, and tears in pipes, hoses and in metal panels of trailers, shipping containers, and metal buildings. We label the tape as Polyken/Nashua 361-11 in the product description because they are co-brands owned by Berry Plastics (the parent company of Nashua, Polyken, Ludlow, Patco, etc. tape brands). The core of Polyken/Nashua 361-11 Waterproofing Repair Tape can be labeled as either Polyken or Nashua depending on which cut rolls we get from the manufacturing production run.
- Shurtape SF-685 ShurMASTIC Butyl Rubber Foil Tape
Shurtape SF-685 ShurMASTIC Butyl Rubber Foil Tape is used for air-tight and moisture-free sealing of rigid and flexible air duct systems. Used primarily to seal sheet metal duct in both indoor and outdoor applications and used as a permanent, water resistant sealer. Use duct mastic to mend poorly sealed connections; improve indoor air quality (since fewer pollutants circulating); lower utility bills; and burn fewer fossil fuels. Features & Benefits Waterproof backing. Stays supple and forms a permanent bond to substrate. Aluminum foil backing may be painted with any paint recommended for aluminum. Contains no asbestos, CFCs or PCBs.
- Shurtape SF-686 ShurMASTIC Indoor/Outdoor Mastic On A Roll
Shurtape SF-686 ShurMASTIC Indoor/Outdoor Mastic On a Roll is used for air-tight and moisture-free sealing of Class 1 Flex Duct, sheet metal, PVC coated duct and duct wrap vapor barriers. Approved for subgrade application on PVC coated duct. Also used for Indoor/outdoor uses as a permanent, water resistant sealer. Aluminum foil backing may be painted with any paint recommended for aluminum and it contains no asbestos, CFCs or PCBs. UL 181B-FX Listed.