Rubber Splicing Tape Sitemap

Scotch 130C Linerless Rubber Splicing Tape is a highly conformable, linerless Ethylene Propylene Rubber (EPR), high-voltage insulating tape that provides excellent thermal dissipation of splice heat. The tape is designed for use in splicing and terminating wires and cables. Rated up to 194°F continuous operating temperatures and short-term 266°F overload service. It also meets industry specifications and has excellent physical and electrical properties (which are unaffected by the degree of stretch), which helps provide immediate moisture seal and void-free buildups. Scotch 130C is self-fusing which means it is an adhesive-free tape that fuses only to itself (no sticky residue left on surfaces). This tape should be applied in successive half-lapped level wound layers until the desired build-up is reached. Scotch 130C Linerless Rubber Splicing tape should be applied like any rubber tape; that is, the side of the tape wrapped inside the roll should be applied outside on the splice (tacky side up). This will help prevent the roll from getting progressively further away from the work area. To eliminate voids in critical areas, highly elongate 130C tape. Stretch tape in critical areas just short of the breaking point; doing so will not alter its physical or electrical properties. A brand of 3M. Primary Applications Primary insulation for splicing all types of solid dielectric insulated cables through 69 kV Primary insulation for building stress cones on all types of solid dielectric insulated cables up to 35 kV Jacketing (secondary insulation) on high-voltage splices and terminations Moisture-sealing electrical connections Bus bar insulation End-sealing high-voltage cables Motor leads Jacket repairs

Scotch 23 Rubber Splicing Tape is a 30-mil, premium-grade, highly conformable, rubber splicing tape. The self-fusing tape has a special polyester liner, which will not stick to the tape upon unwind. 3M Scotch 23 has greater physical and electrical properties that are unaffected by the degree of stretch. This tape is highly resistant to split, crack and flag when exposed to indoor or outdoor environments. It is designed to splice and terminate cables whose emergency overload temperatures can reach 266°F (130°C). A brand of 3M. Scotch 23 Rubber Splicing Tape is a non-vulcanizing, shelf-stable, self-fusing EPR (Ethylene Propylene Rubber), high-insulating voltage tape, which has a snakeskin liner that is easily removed as the tape is applied. It is compatible with synthetic cables insulations and paper insulations cables. 3M Scotch 23 can be used as an insulation for low-voltage applications as well as an insulation for splices up to 69,000 volts. Scotch 23 Rubber Splicing Tape is compatible with all solid dielectric cable insulation including Polyethylene (high and low density), Cross-linked Polyethylene (XLP), Polyvinyl Chloride (PVC), Butyl Rubber, Ethylene Propylene Rubber (PVC), and Oil-based rubber. Features and Benefits Rubber resin provides excellent adherence to irregular surfaces Temperature rated for continuous adhesion to 194°F (90°C) Self-fusing, ethylene propylene rubber backing, and highly conformable, rubber-resin adhesive Special polyester liner keeps tape protected and clean during application Applications Primary electrical insulation for splicing cable from 600 volts through 69,000 volts on all solid dielectric cables Primary insulation for building stress cones on cables up to 35,000 volts on all solid dielectric cables Jacketing on high-voltage splices and terminations Moisture sealing electrical connections Bus bar insulations End sealing high-voltage cables

Duck Brand Self-Fusing Rubber Splicing Tape is used to protect your electrical project from the elements. Instantly create watertight barriers around low voltage electrical splices or wire repairs with Duck® Brand Rubber Splicing Tape. How does this electrical tape create such a durable seal? Its design allows super conformability and stretch so it easily wraps around even the trickiest wires. Plus, its easy-tear and removable liner takes the frustration out of the job - no need for tools to cut it, just use your hands to tear the tape, even with the liner. Duck Self-Fusing Rubber Splicing Tape is designed for use in splicing and terminating wires and cables. The tape is self-fusing which means it is an adhesive-free tape that fuses only to itself (no sticky residue left on surfaces) so there won't be a noticeable tackiness to the tape. Also, be sure to remove the blue liner before applying the tape and the tape sticks best by being slightly stretched as you wrap it around the wires, not too much but just to give a little tension.