'Excell ET-81' is out of stock and not currently available for purchase on the site.
Excell ET-81 Extra Wide Bench Tape Dispenser
The Excell ET-81 Extra Wide Bench Tape Dispensers are an excellent solution to any application where multi-roll tapes are required. The Excell ET-81 Dispensers feature heavy duty metal construction and have a wide cutting surface for quick and easy use. The C-clamp included with each dispenser ensures a fast and secure mount to a desktop, workstation or angled surface. The Excell ET-12281 Dispenser fits tape rolls with 3-inch core diameter and up to 2-inch combined width. The Excell ET-13381 Dispenser fits tape rolls with 3-inch core diameter and up to 3-inch combined width. Both dispensers can accommodate rolls with up to a maximum outside diameter of 5-3/8 inches.
- Desktop or workstation model
- ET-12281: use with 1 2-inch tape roll OR with 2 1-inch tape rolls
- ET-13381: use with 1 3-inch tape roll OR with 3 1-inch tape rolls OR with 1 2-inch tape roll plus 1 1-inch tape roll
- C-clamp included to mount your dispenser to any workstation (has maximum gap opening of 2-1/4 inches)
- Heavy-duty metal construction
- Wide cutting surface increases efficiency
- Anti-rust blade
Warning: This product can expose you to chemicals including Lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
Excell ET-81 Extra Wide Bench Tape Dispenser
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Question & Answers
[ viewing questions 1 through 2 of 2 total ]
mike May 15, 2018
QUESTION: is that blade cover spring loaded so as to cover the blade automatically when not being used?
ANSWER: No, the yellow blade cover on the Excell ET-81 has to be manually closed. Thank you.
Customer Feb 11, 2018
QUESTION: How big is the yellow wheel part?
ANSWER: This accepts 3-inch tape roll cores.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils