PLEASE NOTE 'JVCC DC-UHB80' is out of stock and not currently available for purchase on the site.
JVCC DC-UHB80 Ultra High Bond Double Coated Tape [Solid Acrylic - 80 mil]
Please note JVCC has discontinued this product and only limited inventory now remains.
JVCC DC-UHB80 Ultra High Bond Double Coated Tape is a 80 mil thick structural grade tape comprised of an integral core of solid acrylic polymer, coated on both sides with a uniform high-tack acrylic adhesive, and carried on a white polyethylene release liner. Provides a superior, permanent bond between a wide variety of substrates, including glass, some plastics, composites, sealed wood, metals, and painted metals. Withstands a wide range of weathering and temperature conditions without losing adhesion. Solid acrylic core gives tape superior strength; it can be easily applied and cleanly cut, yet is flexible, moldable, compressible and conformable to intricate shapes. Tape will bond to most surfaces, but thorough evaluation is recommended when bonding low energy surface material such as PVC, ABS, Polyethylene (PE) and Polypropylene (PP). Not recommended for bonding Teflon, Tedlar, silicone or EPDM.
JVCC DC-UHB80 is used primarily in the transportation industry, automotive, truck, trailer and bus, signs, graphic art assemblies, furniture/appliance manufacturing and RV skin to frame assembly. Rugged metal to metal bonds to replace welding, rivets, bolts, screw and cementing. It will maintain adhesion at sub-zero temperatures and is non-staining and will not harden or become brittle with age. It isolates and dampens vibration and shock. It also complies with European RoHS directive 2002/95/BC. Made in the U.S.
JVCC DC-UHB80 Ultra High Bond Double Coated Tape
- Adhesive: ultra high bond acrylic How are adhesives different?
- Carrier/Backing: solid acrylic polymer
- Release Liner: white polyethylene film
- Thickness: 87 mils (carrier, adhesive, liner) 80 mils (carrier, adhesive) 7 mils (liner) What is mil thickness?
- Adhesion: 240 ounces per inch (to stainless steel test panel)
- Tensile Strength: 200 pounds per inch (longitudinal)
- Service/Operating Temperature: -30°F to 200°F
- Application Temperature: 50°F to 100°F
- Elongation: 500%
- Density: 62.5 pounds per cubic foot
- Dynamic Shear Strength: 90 pounds per square inch
- Standards Met: Complies with European RoHS directive 2002/95/BC
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
This product can be used as an alternative to the following products(s):
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
- 3M #4955
- ADCO #AT-3080-457A
- Scapa S5300D
- Hi-Bond #VST-6200W
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils