JVCC E-Tape-Pack Electrical Tape Rainbow Packs
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
If you would like to buy individual colors in any quantity or if you would like to build a custom case of mixed colors please see the "JVCC E-Tape Colored Electrical Tape" product.
JVCC E-Tape Electrical Tape Rainbow Packs are packs which are comprised of either 8 or 10 different OSHA colors of general-purpose all-weather PVC film electrical tape. The tape has an aggressive rubber resin adhesive and the rolls are UL/CSA listed on a 1-1/2 inch inner diameter core. The 3/4 inch (19mm) wide pack consists of 10 colors which are black, blue, brown, green, grey, orange, red, white, yellow and then either pink or purple. The 2 inch (48mm) wide pack consists of 8 colors which are black, blue, green, grey, orange, red, white and yellow. JVCC E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant.
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
JVCC E-Tape-Pack Electrical Tape Rainbow Packs
- Standards Met: UL/CSA listed
- Carrier/Backing: plasticized polyvinyl chloride (PVC) film
- Adhesive: rubber resin How are adhesives different?
- Thickness: 7 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 14 ounces per inch (to stainless steel test panel)
- Tensile Strength: 17 pounds per inch (longitudinal)
- Dielectric Breakdown: 6000 volts
- Service/Operating Temperature: 14°F to 176°F
- Application Temperature: 32°F to 122°F
- Elongation: 250%
- Core: 1-1/2" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
E-Tape-Pack Standard sizes
|PACK SIZE||ITEM #
||PACKS PER CASE
||PRICE PER PACK
||PRICE PER CASE
3/4 in. x 66 ft. [10 rolls/pack]
Actual Size: 19mm wide
Single Pack (1-9 Packs)
1 - 3 Cases (10-39 Packs)
4 - 8 Cases (40-89 Packs)
9 - 18 Cases (90-189 Packs)
19+ Cases (>= 190 Packs)
2 in. x 66 ft. [8 rolls/pack]
Actual Size: 48mm wide
Single Pack (1-4 Packs)
1 - 3 Cases (5-19 Packs)
4 - 8 Cases (20-44 Packs)
9 - 18 Cases (45-94 Packs)
19+ Cases (>= 95 Packs)
Question & Answers
[ viewing questions 1 through 1 of 1 total ]
Mr. F. Dec 14, 2017
QUESTION: In reference to the JVCC E-Tape-Pack Electrical Tape Rainbow Packs, the description mentions cold resistant. What temperature is considered cold? What does the manufacturer documents (on packaging?) ?
ANSWER: JVCC got back to us and said Service/Operating Temperature is 14°F to 176°F (and application temperature is 32°F to 122°F). Thank you.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils