'JVCC EX-4M' is out of stock and not currently available for purchase on the site.

Product Description

JVCC EX-4M Quadruple-Roll Steel Desktop Tape Dispenser is a heavy-duty desktop dispenser with separate spools & blades for four rolls. Each roll can be up to 1 inch wide and the core size the spools will work with are 3 inch diameter cores. This dispenser is designed for either single-sided tape or double-sided film tape. The maximum outside diameter (OD) is 5 inches on 2 rollers and 6 inches on the remaining 2 rollers. The JVCC EX-4M dispenser is offered in two different blade systems: razor blades (RB) or toothed blades (TB). The blades can be individually changed or replaced as needed. If want to configure a dual blade system please see the JVCC EX-4M-RP replacement parts to order individual razor or toothed blades for this system. This versatile dispenser is designed for fast access to a variety of tapes with different carriers, widths, colors, thicknesses and/or prints.

Features & Benefits

  • Heavy (9 pound) 4mm thick steel frame eliminates the need for added weight/sand for stability.
  • Coated with epoxy–polyester powder paint for durability.
  • Soft rubber padding on the bottom helps prevent unit from sliding or scratching desktops.
  • Each core holder functions independently for quicker, easier tape replacement.

Uses & Applications

  • Great for production departments, design & architectural firms.
  • The EX-4M with razor blades is primarily designed for thin films such as OPP & PVC where a precise, straight cut is required. Ideal for use in the graphics field.
  • The EX-4M with toothed blades can be used with a wider variety of tapes, including (but not limited to) filament tapes, paper tapes, PVC & OPP films, as well as some double coated tapes.
Country of Origin: Italy.

Warning: This product can expose you to chemicals including Lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

 

Technical Information

JVCC Quadruple-Roll Steel Desktop Tape Dispenser
  • Construction: steel
  • Blade: razor or toothed
  • Country of Origin: Italy
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Question & Answers

User Reviews

[ viewing reviews 1 through 1 of 1 total ]
RH
Robert H. Verified Buyer Jan 27, 2020
Behemoth
JVCC EX-4M Quadruple-Roll Steel Desktop Tape Dispenser
This thing is a monster. Almost ten pounds. I love it. It sits on my desk unwaveringly. Ready to serve. Love the staggered blades for easy access to each tape. Thank you Find Tape. I have seen this dispenser for double the price and one similar for 4 times the price. I know it will last long after I retire.
JVCC EX-4M Quadruple-Roll Steel Desktop Tape Dispenser
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Search  
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles