'Painter's Mate DS' is not currently available for purchase on the site.
Painter's Mate DS Double-Sided Poly Hanging Tape [Discontinued]
Shurtech Painter’s Mate Double-Sided Poly Hanging Tape is an all-in-one solution for hanging poly-sheeting that is cost and time-efficient. Each roll is designed with a unique, double-sided adhesive system: the exposed side features a premium grade painter’s tape adhesive that allows for 21-day clean removal from a variety of surfaces; removing the liner exposes an aggressive adhesive that securely holds poly-sheeting, plastic drop cloths, tarps, and other protective coverings.
Features & Benefits
- Two-tapes-in-one design.
- All-in-one solution for hanging poly-sheeting that is cost- and time-efficient.
- Hand-tearable and repositionable.
- Conforms to uneven or irregular surfaces.
- Removes quickly and easily in a single step.
Made in the U.S.
Here are a few easy steps to follow when applying painter’s tape to get the best results.
- Clean your painting surface.
- Sponge the walls with a mild detergent, cleaning from floor to ceiling.
- Clean thoroughly around air vents.
- Make sure the walls are dry before you apply the tape.
- Use the right tape for the job.
- Use the right tape for the job.
- Choose a tape that adheres quickly with a good seal – and one that will be easy to remove.
- Some tapes are designed for specific surfaces … and don’t play well with the surfaces they aren’t made for.
- Read the instructions and select your tape carefully.
- Apply Tape
- For easier application, you don’t have to apply one long strip of tape.
- Tear off one-foot lengths of tape for better control and better adhesion to surface.
Painter's Mate DS Double-Sided Poly Hanging Tape
- Carrier/Backing: fine structured crepe paper
- Adhesive: synthetic rubber (differential) How are adhesives different?
- Release Liner: super-calendered kraft (SCK)
- Thickness: 8.5 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 27 ounces per inch (exposed side) / 60 ounces per inch (liner side)
- Tensile Strength: 21 pounds per inch (longitudinal)
- Service/Operating Temperature: 32°F to 120°F
- Elongation: 9%
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils