- JVCC REF-7 Engineering Grade Reflective Tape
JVCC REF-7 Engineering Grade Reflective Tape is used for safety applications as well as entertainment industry use as spike tape or "daytime" glow tape. Reflective Tape is primarily designed for permanent and temporary traffic signage and features an enclosed lens retroreflective urethane film coated with a permanent acrylic adhesive. Application surface should be flat (not for unpainted stainless steel surfaces). JVCC REF-7 may be screen printed, guillotine cut, die-cut, or thermal kiss-cut. The adhesive has a dwell time of 24 hours, but reaches 75% of its adhesiveness after 15 minutes. Comes on a 3 inch diameter neutral paper core and has a paper release liner. Meets or exceeds requirements of federal specification LS-300C, FP-85, and ASTM D4956-94. Has a 7 year durability. Photos of REF-7 are taken with a flash camera in order to show the reflectivity of the tape; the colors of the tape will be much darker if a high intensity light source (like the flash from a camera) is not being directed at the tape. The colors in order of reflectivity are: white, yellow, orange, green, red, blue (white is around 15 times more reflective than blue). Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle White Yellow Orange Green Red Blue 0.2° -4° 70 50 25 9 14 4 30° 30 22 7 3.5 6 1.7 0.5° -4° 30 25 13 4.5 7.5 2.0 30° 15 13 4 2.2 3.0 0.8 Note: we can special order 50 yard rolls so please use the contact us page to inquire about minimum order requirements and pricing for these longer length rolls.
- ISC REF1X24 Black Reflective Tape
ISC REF1X24 Black Reflective Tape blends in with black during the day and shines bright white at night when another headlight reflects it. Improves safety and nighttime visibility while maintaining good looks. Perfect for the rear of motorcycles, bicycles, snowmobiles, helmets, or anything imaginable that you want to be seen. Hardly noticeable on black, which is the color of choice on many vehicles or bicycles on the roads today. Comes in a small retail pack with a 1 inch x 24 inch strip and a 1/2 inch x 24 inch strip. Cut to desired length or pattern, then remove backing and apply. The tape has a typical coefficient of retroreflection of 30 and meets NFPA requirements.
- JVCC REF-S Engineering Grade Striped Reflective Tape
JVCC REF-S Engineering Grade Striped Reflective Tape is used for safety applications and is primarily designed for permanent and temporary traffic signage. It is a polyester/vinyl tape coated with an acrylic adhesive. Use to help prevent accidental damage to shelves/racks, loading docks and poles. Diagonal stripes on the tape are approximately 2-7/8" long (measured along the side edge of the roll). REF-S Reflective Tape meets Federal specification No. LS-300C (Reflectivity 1, class 1) and FP-85 (Type II). Red with White stripes is not recommended for long term outdoor use due to fading.
- 3M Scotch Scotchlite Reflective Striping Tape
3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicle, boats, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets). The black film, which reflects whitish/tan at night when hit by light, has a typical coefficient of retroreflection of 30. Meets NFPA requirements. Please note 3M uses the same Scotchcal retail packaging for all their striping tapes (whether they are reflective or not); however this tape is Scotchlite reflective striping tape and the correct product numbers listed below will be on the retail packaging: 79902 - 1/4 inch wide black 79905 - 1/4 inch wide blue 79903 - 1/4 inch wide gold 79907 - 1/4 inch wide orange 79904 - 1/4 inch wide red 79901 - 1/4 inch wide silver / white 79908 - 1/4 inch wide yellow 79922 - 1/2 inch wide black 79942 - 1 inch wide black Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle Blue Orange Red Black Yellow Gold Silver/White 0.2° -4° 10 20 20 30 65 70 100