JVCC ATG1 ATG Tape Dispenser

Print Page
  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
  • Dispenser Size
    For 1/2" and 3/4" ATG tape
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please click on the "Product Description & Specs" tab below for more information about this item.

ATG1 Standard sizes


For 1/2" and 3/4" ATG tape

ATG1/ 0507512

Single Dispenser (1-11 Dispensers)

1 - 2 Cases (12-35 Dispensers)

3 - 4 Cases (36-59 Dispensers)

5+ Cases (>= 60 Dispensers)









Product Description

JVCC ATG1 ATG Tape Dispenser is a hand held tape dispenser for ATG tape. The dispenser/applicator will automatically wind up the liner on your ATG tape during use. It will accommodate both 1/2 inch and 3/4 inch rolls of ATG tape (it accepts 1/4 inch ATG tape also although rolls may slide around a bit on the spool since the spool is wider than the tape; however some people find it not to be an issue). All of the ATG tapes we sell will fit in the ATG1 dispenser. The dispenser color will either be blue, red, teal or orange depending on the color of the last lot received in.

For a visual guide to loading and using refill rolls in a JVCC ATG1 dispenser please see http://static.findtape.com/inserts/ATG-Loading-Instructions.pdf.

USAGE NOTES: Start by putting the roll of tape on the spool in the middle of the gun with the tape running down clockwise (make sure the roll snaps down on to the spool so that if you pull on the tape the roll does not spin freely on the spool unless you are also holding the trigger down). It then runs on top of the roller closest to it and then under the roller in the front of the gun. During usage the adhesive gets applied at the point of the front roller so when you are first loading the gun remove any adhesive off the liner by hand at this point so only the liner then comes back over the roll which is on the main spool in the middle of the gun and then runs under the liner take-up spool (secure the liner in one of the slits in that spool). Then hold the trigger down when applying the tape (it allows the spools to turn). To stop applying let go of the trigger and pull the dispenser away.

Please see listing below to confirm which ATG refill rolls work in which ATG dispensers (you can also watch a YouTube video demonstrating the compatibility between ATG refill rolls and ATG guns).

JVCC ATG1JVCC ATG1 Dispenser -or- Scotch 700Scotch 700 Yellow DispenserScotch Advanced Tape GliderScotch 085 Pink Glider -or- Scotch 714Scotch 714 Red Dispenser -or- Scotch 700AScotch 700A Adapter used in Scotch 700 Yellow Dispenser
* Multiple cases may be shipped per package in order to minimize the charge for shipping.


Technical Information

JVCC ATG1 ATG Tape Dispenser
  • Construction: plastic
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Download Datasheets

Download Datasheets

The following downloads are available for this product:

Download Usage Instructions
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • Shurtape SD-950
  • ATG-50
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
JVCC ATG1 ATG Tape Dispenser
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Continue Shopping View Shopping Cart
Recently Viewed Products

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

See also
Electrical Tapes
Tapes for Scrapbooking