High Temperature Masking Sitemap

Intertape PG21 High Temperature Masking Tape is an extremely versatile masking tape which is resistant to strong solvents and paints and is easily removed in warm or cold environments. It is designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes (time and temperature determined by surface). IPG PG21 performs well in wet strip applications and its easy handling, smooth paper crepe backing exhibits high strength, excellent conformability to irregular surfaces and exceptional cornering. It provides resistance to paint flaking as well as a clean, well-defined paint line. Applications uses include automotive, truck, bus and marine paint masking. Recommended hot to warm removal, but can be removed cold.

Nitto (Permacel) P-703 High Temperature Masking Tape, a high-quality crepe paper masking tape, is designed for paint masking applications in high temperatures. Nitto P-703 (also known as Permacel P-703) is commonly used for general purpose masking in addition to splicing and holding. It is especially useful with hard-to-hold surfaces like chemically treated fabric. This Nitto tape is resistant to alkyd and acrylic paint solvents, with fair resistance to highly active polyurethane paint solvents and ketones. Nitto P-703 can withstand temperatures up to 300 degrees Fahrenheit (149 degrees Celsius) for up to 1.5 hours without mass transfer or slivering when removed. It supports Kraft masking paint drapes at baking temperature. Features and Benefits Good high baking temperature properties Coated with natural rubber adhesive for high temperature paint masking Resistant to solvents and stains No odor Ages well; long shelf life Excellent tear strength Quick-stick and high-hold characteristics Good elongation with optimal conformability around corners and on uneven surfaces Smooth and thin; prevents paint build-up along edges Doesn't highlight on appliance finishes Product Applications Paint masking in aerospace, automotive and housing markets General purpose masking to 300 degrees Fahrenheit (149 degrees Celsius) Can be used on rough substrates

Shurtape CP-500 High Temperature Masking Tape is ideal for today's high tech transportation industry. Works best in metal preparation, high temperature painting applications and coating. Strips cleanly after baking or extended applications (up to 300°F). Used for both the automotive aftermarket and other industrial uses. Typical applications for Shurtape CP 500 crepe paper masking tape include both metal preparation, painting and coating; as well as today's high tech transportation industry (auto, coaches, and buses). Benefits of the tape include: no adhesive residue; excellent quick stick; clean, flat edges; excellent adhesion to metals, rubber, plastics and fiberglass; strips cleanly with no residue or paint flake after baking and extended application periods; solvent resistant; excellent adhesion to tape backing and masking papers; and smooth unwind.

JVCC HTM-01 High Temperature Masking Tape is a premium painters masking tape with a solvent based cured natural rubber based adhesive system designed to work in masking applications where elevated temperatures and solvent resistance are required. Tape can be used up to 230°F for up to one hour while maintaining integrity, holding power, and clean removal characteristics. JVCC HTM-01 conforms to a broad range of surfaces. Use of this heavy crepe paper tape provides good tensile strength and tear characteristics as well as excellent elongation for wrapping an masking around curved surfaces. Recommended for high demand painting and masking applications; especially automotive masking applications. Masking tapes cut to wider widths like 4, 6 and 8 inches is harder to unwind without tearing the roll since masking tape is thinner crepe paper. Best to start by unwinding slowly and once you have an entire full width section unwound then fold the tape over itself like we show in the photo which makes the unwind process much easier.

Indasa MTY High Temperature Automotive Masking Tape is a deep colored saturated crepe paper premium masking tape coated with a cross linked natural rubber resin adhesive. It offers excellent high tack as well as brilliant water and solvent resistant features. It is industrial strength and sticks instantly to most surfaces including metal, rubber, glass and plastic. Flexibility of tape allows to shape on contours. Delivers high quality sharp paint lines. Designed for both indoor and outdoor use and offers up to 10 to 15 days of clean removal (UV resistant). Engineered for the racing and marine fabrication industry and is designed to be residue-free even under extreme conditions. Its waterproof backing fits baking cycles up to 230°F for 60 minutes. Indasa MTY is also suitable for wet sanding processes and other high demanding duties. Not recommended for delicate surfaces.

3M 401+ High Performance Green Masking Tape is is the preferred choice among industrial painters who demand results. Built on a foundation of innovation, 401+ tape is designed to deliver super-sharp paint lines in applications where surface temperatures can reach up to 250°F. When you consider 401+ can also be used to accomplish everything 3M™ Industrial Masking Tapes 101+, 201+ and 301+ can do, it’s quite possibly the most versatile tape in the line. It’s one mean, green, masking machine, designed to deliver the consistently superior results you’ve come to expect from 3M. Ideal for critical paint masking applications in automotive, specialty vehicle and industrial markets where strong holding and high temp performance is required. 401+ offers 36 ounces per inch of peel adhesion compared to 3M's blue painters tape which only offers 23 ounces per inch - yet it is still designed to remove cleanly. Features & Benefits Superior adhesion to metal, rubber, glass and plastic, while removing cleanly in one piece with no adhesive residue. Highly conformable to many surfaces. Resists paint bleed-through and creates super-sharp paint lines. Green backing improves visibility and accuracy during paint masking. Ideal for high performance industrial painting, including twotone color applications on trucks, buses, trailers, trains, fire trucks, ambulances and airplanes. Withstands surface temperatures up to 250°F (121°C) for 30 minutes.

Shurtape CP-901 Steep Pipe Masking Tape is the first high temperature masking tape in the industry which is designed specifically for steel pipe coating applications. The tape is coated with a solvent rubber adhesive system that is purpose-built to perform at elevated temperatures yielding quick "stick" performance, excellent adhesion to the hot pipes, and easy, residue-free removal (also no charring of the tape). It also has a special cured release system which ensures it adheres well to itself, preventing coating damage caused by loose tape ends. In addition to these important characteristics, CP 901 is also splice free, providing excellent strength while reducing the number of breaks, and it is shear cut resulting in a clean, sharp coating edge. Shurtape's CP 901 steel pipe masking tape is designed to offer optimum performance in the three most important criteria for oil & natural gas steel pipe coating applications: it applies quickly, takes the heat effectively, and removes cleanly. CP 901 has been field tested and approved by various pipe coaters using the Fusion Bonded Epoxy (FBE) coating process, which is used by the majority of pipe coaters in North America. It has also been tested and proven in high speed FBE, as well as the longer duration Fusion Bonded Epoxy and Abrasion Resistant Overcoat (FBE + ARO) process. It can mask powder coating on steel pipes at 450-460 ° for short time durations (1-2 minutes) and up to 350° for longer time durations. High initial tack on the tape enables quick and secure tabbing onto pipes and its backing prevents corrosion coating from being deposited on the pipe ends.

Shurtape CP-650 High Performance Grade Temperature-Resistant Masking Tape is engineered utilizing a heavy smooth crepe paper backing combined with a moderate temperature, rubber adhesive system. This high heat masking tape exhibits a smooth, consistent unwind which delivers a user-friendly product during application. Shurtape CP 650 is ideally suited for demanding masking applications in the transportation, marine and metal fabrication industries and is often used as an automotive masking tape. Uses & Applications Designed for today's high tech transportation industry (auto, coaches, buses and marine). Metal preparation, painting, coating and gel coat masking. Strong backing to hold up to the most demanding applications. Features & Benefits Removes cleanly (warm and cold) with no adhesive residue in application temperatures to 325°F. High temperature stability through multiple bake cycles. Strong backing for tear and sliver resistance. Excellent adhesion to metals, rubber, plastics and fiberglass. Conformability for rounding curves and contours. Clean, flat edges for sharp paint lines. Solvent and moisture resistant to minimize bleed-through.

Intertape AM [AquaMask] Medium Temperature Masking Tape is an aqua colored (blue-green), conformable, saturated, crepe paper masking tape coated with a pressure-sensitive rubber adhesive. Good adhesion and holding properties. Clean, easy removal. Resists paint flaking and wet sanding. Compatible with both water and solvent-based paints. UV-resistant up to three (3) days. Temperature resistant up to 225°F (107°C) for 30 minutes. Used for paint masking requiring adhesion to and removal from a variety of surfaces.

ISC Racers Tape Blue Hi-Temp Masking Tape is a masking tape used for auto body automotive work (not your standard blue painters tape). It is engineered for the racing fabrication industry and is designed to be residue-free even under extreme conditions. ISC's Blue Hi-Temp Masking is ideal for use in painting, metal fabrication and powder coating in the racing and marine industries.The tape can resist a range of temperatures, up to 250 °F for 30 minutes (suitable for medium temperature paint bake operations). Even when subject to high temperatures, a cured rubber adhesive system allows for clean removal from metal, rubber, plastics and other surfaces and still results in sharp paint lines. The tape is conformable to irregular surfaces and it resists solvents and moisture to minimize paint bleed-through and rework. It is also compatible with solvent and latex based paints and its strong crepe paper backing (which is treated with heat and solvent resistant saturant) resists tears and silvers.