- JVCC V-36P Premium Colored Vinyl Tape
JVCC V-36P Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape and it is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape.
JVCC V-36P Premium Vinyl Tape features include:
Latex-free.
Long shelf life.
"Write-on" capability.
Provides very effective vapor/moisture barrier.
Highly conformable and good abrasion/impact/rupture resistance.
Resistant to aging, sun, water, fungus/bacteria, oil, acids/alkalies/corrosive chemicals.
No corrosion to copper, brass, steel, or aluminum.
- JVCC V-36 Colored Vinyl Tape
JVCC V-36 Colored Vinyl Tape is a durable tape used for marking floors/lanes, color coding, decorating, temporary striping on vehicles and boats, and to identify restricted or hazardous areas. Used extensively on school gym floors all kinds. Helps with safety coding to meet OSHA requirements. Can also be used for masking of hard chrome plating and anodizing, harness and pipe wrapping, and duct and joint sealing. JVCC V-36 Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape.
Features include:
"Write-on" capability.
Highly conformable and good abrasion/impact resistance.
Provides vapor/moisture barrier.
Resistant to aging, sun, water, fungus/bacteria, acids/chemicals.
No corrosion to copper, brass, steel, or aluminum.
- JVCC HZ-8 Hazard Warning Tape
JVCC HZ-8 Hazard Warning Tape is a conformable soft PVC vinyl tape used for aisle, exit, floor, restricted and hazardous area marking. It is also used for striping. Helps to comply with OSHA requirements per paragraph 1910.144 of the Federal Register. JVCC HZ-8 striped hazard warning tape features a self-extinguishing synthetic rubber adhesive and it will not corrode copper, brass, steel, or aluminum. Color choices include:
Black/yellow which is typically used for physical hazard/caution.
Red/white for fire equipment/first aid.
Black/white for traffic/housekeeping.
Green/white for decorative identification.
Magenta/yellow for radiation hazard.
The diagonal stripes on the tape are approximately 2-3/4" long (measured at the edge of the roll).
- JVCC BR-1 Barricade Tape
JVCC BR-1 Barricade Tape is a NON-ADHESIVE film barrier tape used for barricading off restricted, work, or hazardous areas. Stock legends including "Caution", "Caution Buried Electric/Water/Sewer Line Below", "Caution Construction Area", "Caution Do Not Enter", "Caution Wet Floor", "Crime Scene Do Not Cross", "Cuidado", "Danger", "Danger Do Not Enter", "Fire Line Do Not Cross" and "Police Line Do Not Cross" can be chosen. Tapes available without a legend include solid color red and yellow as well as black and yellow stripes. Thicknesses range from 2 mils to 3 mils depending on the legend ordered. Used by police and other emergency personnel.
Note: please use the 'Contact Us' page to inquire about other stock legends which may be available or custom legend pricing.
- JVCC GLW Glow in the Dark Tape
JVCC GLW Glow in the Dark Tape is a premium flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants.
JVCC Glow in the Dark Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adjusted eye for up to 6 hours (to the night-adjusted eye it is visible, but it would not compare it brightness to say a standard flashlight). It also recharges. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. The tape is offset, screen, flexo, and thermo transfer printable. Adhesive has a 24 hour dwell time.
Note: 6 foot glow strips are shipped in rolled format (typically 10 glow strips will be rolled together in a bag).
- JVCC HZ-8LP Laminated Premium Hazard Warning Tape
JVCC HZ-8LP Laminated Premium Hazard Warning Tape is a PVC vinyl tape with a 2 mil over-lamination. The tape is scuff resistant and it resists oil, grease, solvents and moisture. JVCC HZ-8LP is used for marking fire equipment, exits, hazardous areas, floors and first aid points. It also meets government specification A-A-1689B Type II.
Note: We can also special order this tape with red/white or with black/white stripes so please use the 'Contact Us' page to inquire about minimum requirements and pricing.
- JVCC HZ-DT1 Hazard Duct Tape
JVCC HZ-DT1 Hazard Duct Tape is a high quality polyethylene coated cloth duct tape, with a residue free natural rubber adhesive. Striped safety warning duct tape is used for permanent and temporary marking of hazardous areas, floors, aisles, stairs, wires, and cords. HZ-DT1 Hazard Duct Tape is ideal for use in manufacturing, as well as in convention & exhibition halls and residential & commercial sites. Hand-tearable and easy to use and unwind so wide widths can be used. Peels off cleanly upon removal, leaving no residue.
- Shurtape P-661 Glow in the Dark Gaffers Tape
Shurtape P-661 Glow in the Dark Gaffers Tape is a premium gaffer tape product that glows in the dark. It boasts the same high quality adhesive as Shurtape P-665 and offers the same clean removability and it is also hand tearable unlike traditional film glow-in-the-dark tapes. Gives the added benefit of being photoluminescent after the tape is activated by an artificial or natural light source. Applications for stage safety are numerous; such as marking stair and exits. Shurtape P661 is also printable and can be die cut to different shapes and sizes.
- Berry Plastics 771 Surveyors Flagging Tape
Berry Plastics 771 Surveyors Flagging Tape is a NON-ADHESIVE tape used for surveying, trail marking and in other industrial applications. It is brightly colored for easy identification; available in both day-glo orange and day-glo pink. Berry Plastics 771 Surveyors Tape is easy to use - just tie and untie. Reusable.
- Pro Tapes Striped Pro-Gaff Gaffers Tape
Pro Tapes Striped Pro-Gaff Gaffers Tape is a custom printed version of Pro Tapes Pro-Gaffer tape. It helps to readily identify cable areas which ensures high visibility for greater safety. Also used to cover and protect wire and cable. Industry use includes television, audio-visual, rock and roll, trade shows and conventions. Pro-Gaff Caution Cable Gaffers Tape is a premium vinyl cloth tape engineered for use in the most demanding applications. It is water resistant, high temperature and weather resistant, and offers clean removal from wires.
- JVCC V-DCD Vinyl Dots On A Roll
JVCC V-DCD Vinyl Dots On A Roll are SPVC vinyl die cut dots on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic.
For the 1/2, 3/4 and 1 inch dots there are 1,000 dots on a roll and all other sizes have 500 dots on a roll.
- JVCC GLW-24 Ultra Premium Glow in the Dark Tape
JVCC GLW-24 Ultra Premium Glow in the Dark Tape is a flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants.
JVCC GLW-24 Ultra Premium Glow Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adjusted eye for up to 24 hours (to the night-adjusted eye it is visible, but it would not compare it brightness to say a standard flashlight). It also recharges. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. The tape is offset, screen, flexo, and thermo transfer printable. Adhesive has a 24 hour dwell time.
- JVCC V-DCA Vinyl Arrows On A Roll
JVCC V-DCA Vinyl Arrows On A Roll are SPVC vinyl die cut arrows on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic. The arrows are dimensionally square so a 1 inch size arrow would be 1 inch wide by 1 inch long.
For the 1 inch arrows there are 1,000 arrows on a roll and all other sizes have 500 arrows on a roll.
- Berry Plastics 775 Woven Barrier Tape
Berry Plastics 775 Woven Barrier Tape is a woven NON-ADHESIVE plastic tape that provides high visibility for designating hazardous or restricted areas. The ability to tie, untie, and re-use this product, combined with chemical and weather resistance makes this product ideal for construction job sites, road repair, and in-plant applications.
- JVCC BT-1 Barrier Tape
JVCC BT-1 Barrier Tape is a woven reinforced film with NO ADHESIVE. It can be tied, untied, retired, and used again to restrict access to hazardous areas. Chemical and weather resistant.
NOTE: Product is no longer available. Please see Berry Plastics 775 as an alternative.
