'3M 08881' has been discontinued.
3M 08881 Undercoating Spray protects vulnerable automotive metal parts from corrosion and abrasion. Specifically designed for automotive undercarriages, wheel wells, and body panels - quarter panels, under hoods, trunks, undersides of floor pans - it's equally effective in many other automotive applications. Multi-purpose aerosol undercoating is available in a rubberized formula that can be painted. 3M has long been developing new ways to apply science to the lives of professionals in a range of industries including collision repair. Our 3M™ Undercoating is a great example - decades of knowledge in a product that delivers better results in time and quality even for the most specific jobs, and helps you get the most value and customer satisfaction from your entire operation.
Features & Benefits
- Not paintable
- Provides a tough barrier and protects metal from road debris
- An aerosol undercoating with smooth texture in two forms, paintable and non-paintable
- Multi-purpose undercoating may be applied to cars, trucks and recreational vehicles
- Hides welding marks and other repairs
- Sound dampening properties help reduce road noise
Country of Origin: United States.
Warning: This product can expose you to chemicals including , which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
3M Undercoating Spray (08881)
- VOC Content: 453 grams
- Product Type: Rubberized Undercoat
- Material: Natural Rubber, Asphalt
- Dry Time: 30 minutes
- Consistency: Aerosol
- Composition: Solvent-based
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Question & Answers
[ viewing questions 1 through 1 of 1 total ]
MARK JAMES Simonett May 10, 2022
QUESTION: can this product, or another 3m spray product, be applied over rusted frame areas? Or must the surface be prepped clean of rust?
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).