3M B-B Bondo Glazing Spot Putty and Body Filler
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
NOTE: Federal regulations prohibit the shipment of restricted products (aerosol cans, flammable liquids, etc.) by air so please only choose UPS Ground or Surepost as your shipping method if including this product in your order. We can not export this product outside the continental U.S. for this reason.
3M Bondo Glazing Spot Putty and Body Filler smooths and repairs pinholes, scratches, nicks, minor dents, stone chips, and other surface imperfections in automotive paint and bodies. This product is a 2-part component formula that securely and quickly bonds to primer, metal, fiberglass, and aluminum. Its spreadable nature and five minute working time mean there's no need to rush during the filling process. After only 20 minutes of curing, it will be ready to be sanded for smoothness and primed for repainting.
- Clean area with soap and water followed by a VOC compliant surface cleaner, let dry.
- Sand with 180 grit sandpaper to remove any damaged paint. It is not necessary to sand down to the bare metal or fiberglass.
- Wipe off sanding dust.
- Knead both tubes of the product before use. Squeeze out a 1.5-inch diameter circle of the putty, then squeeze out a 1/2-inch strip/bead of the red cream hardener. Mix thoroughly and quickly; working time is only five minutes.
- Apply/spread putty to fill the damaged area slightly higher than the original surface staying inside the sanded area. For best results apply above 45 degrees Fahrenheit (7 degrees Celsius).
- After 20 minutes, sand smooth/level with 220 grit.
Made in the U.S.
Warning: This product can expose you to chemicals including , which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
3M B-B Bondo Glazing Spot Putty and Body Filler
- Container: Canister or Tube
Note: Specifications are those given by manufacturers and are not tested for accuracy.
B-B Standard sizes
|ITEM SIZE||ITEM #
||ITEMS PER CASE
||PRICE PER ITEM
||PRICE PER CASE
Body Filler, 1 pint
Single Item (1-11 Items)
1 - 2 Cases (12-35 Items)
3 - 4 Cases (36-59 Items)
5+ Cases (>= 60 Items)
a 19% discount
a 20% discount
a 21% discount
Glazing and Spot Putty, 3 ounce
Single Item (1-5 Items)
1 - 2 Cases (6-17 Items)
3 - 4 Cases (18-29 Items)
5+ Cases (>= 30 Items)
a 14% discount
a 15% discount
a 16% discount
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils