Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
NOTE: Federal regulations prohibit the shipment of restricted products (aerosol cans, flammable items, etc.) by air so please only choose UPS Ground or Surepost as your shipping method if including this product in your order. We can not export this product outside the continental U.S. for this reason.
3M Bondo Wood Filler is a fast curing, all-purpose wood fill solution intended for minor to advanced repairs on rotted or damaged wood products. The quick-drying formula is ready to be sanded by hand or with power tools only 15 minutes after being applied and is paintable/stainable after 25 minutes. This results in the ability to perform a professional-grade repair in under half an hour. The two-part formula includes a hardener cream that accelerates the curing process, in addition to ensuring that there is a strong water-resistant bond that will not shrink, dry out, or deform over time or with exposure to the elements.
Uses & Applications
3M Bondo wood Filler is excellent for many applications both inside and outside the home, on a wide variety of commonly damaged wood surfaces such as:
- Window sills
- Exterior wood trim such as door frames and jambs, soffits, and fascia
- Fences and posts
- Garage doors
- Wood floors and stairs
- Exterior wood columns, doors, and flower boxes
- Interior doors, baseboards, and more
Made in the U.S.
Warning: This product can expose you to chemicals including , which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
3M B-W Bondo Wood Filler
Note: Specifications are those given by manufacturers and are not tested for accuracy.
B-W Standard sizes
|ITEM SIZE||ITEM #
||ITEMS PER CASE
||PRICE PER ITEM
||PRICE PER CASE
Filler 0.75 pint, Hardener 0.5 ounce
Single Item (1-3 Items)
1 - 2 Cases (4-11 Items)
3 - 4 Cases (12-19 Items)
5+ Cases (>= 20 Items)
a 18 % discount
a 19 % discount
a 19 % discount
Filler 1.9 pounds, Hardener 1 ounce
Single Item (1-2 Items)
1 - 2 Cases (3-8 Items)
3 - 4 Cases (9-14 Items)
5+ Cases (>= 15 Items)
a 15 % discount
a 16 % discount
a 17 % discount
Question & Answers
[ viewing questions 1 through 1 of 1 total ]
Tom Mau Jan 30, 2021
QUESTION: can i bond two pieces of wood together, as in two 45 degree cuts to get a ninety degree moulding corner
: Bondo's wood filler product is used to repair/fill rotted or damaged wood. To join two pieces of wood together would look at wood glue product such as Gorilla's Wood Glue - see https://www.findtape.com/p1100/
. Thank you.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils