3M Disposable Protective Coverall (SKU 45-DPC)
3M Disposable Protective Coverall (SKU 45-DPC)3M Disposable Protective Coverall (SKU 45-DPC)3M Disposable Protective Coverall (SKU 45-DPC)3M Disposable Protective Coverall: 45103M Disposable Protective Coverall: 45303M Disposable Protective Coverall (SKU 45-DPC)

3M Disposable Protective Coverall (SKU 45-DPC)

Print Page


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Blue
  • Size
    Large / 25-pack (blue)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

3M Disposable Protective Coveralls are hooded, single-use Type 5/6 coveralls that protect workers against hazardous dusts and fibers and light liquid splashes. They are CE Category III protective clothing rated Type 5 (EN ISO 13982-1) for airborne solid particulates and Type 6 (EN 13034) for limited liquid splash, with an anti-static treatment (EN 1149) and radioactive particulate protection (EN 1073-2).

Each coverall has an attached hood, a two-way zipper with a sealable storm flap, elasticated waist and ankles, and a cut that leaves room to bend, kneel and reach. Two fabrics are offered: a breathable, lightweight SMMS polypropylene with limited flame spread resistance (ISO 14116 Index 1, worn over a flame resistant Index 2 or 3 garment) and knitted cuffs, or a microporous polyethylene laminate on a soft polypropylene base that adds protection against infective agents (EN 14126), is low linting and contains no silicone or natural rubber latex.

Typical uses are sanding, insulation, mining, oil and gas, painting prep, cleaning and sanitation, food processing and general maintenance. Ground the wearer for the anti-static treatment to work.

Features & Benefits

  • Type 5/6 protection against hazardous dusts and light liquid splashes
  • Anti-static treatment helps reduce static build-up
  • Radioactive particulate protection (EN 1073-2)
  • Attached hood zips up to the chin
  • Two-way zipper with sealable storm flap
  • Elasticated waist and ankles for a secure fit
  • Breathable fabric for comfort on long shifts

Uses & Applications

  • Sanding, grinding and insulation work
  • Mining, oil and gas, and heavy industry
  • Cleaning, sanitation and food processing
  • Maintenance, painting prep and construction

Limitations

  • Not for gases and vapors, liquid spray, organic solvents, heavy oils or combustible liquids
  • Not primary protection from heat and flame
  • Not for high mechanical risk (abrasion, tears, cuts); single use

 

Technical Information

3M Disposable Protective Coverall (SKU 45-DPC)
  • Standards Met: CE Category III, Type 5 EN ISO 13982-1, Type 6 EN 13034, EN 1149 anti-static, EN 1073-2
  • Weight: 10 pounds 6 ounces
  • Construction: polypropylene nonwoven (sms) or microporous polyethylene laminate
  • Protection: Type 5 (EN ISO 13982-1) and Type 6 (EN 13034)
  • Anti-static: EN 1149
  • Radioactive Particulates: EN 1073-2
  • Hood: Attached, zips to chin
  • Closure: Two-way zipper with sealable storm flap
  • Not For: Gases and vapors, liquid spray, organic solvents, heavy oils, primary heat and flame protection
  • Country of Origin: China
Note: Specifications are those given by manufacturers and are not tested for accuracy.

45-DPC Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

Large / 25-pack (blue)

4530-BLK-L

UPC = 046719629736
1

Single Item (1 Item)

1 - 4 Cases (1-4 Items)

5 - 9 Cases (5-9 Items)

10+ Cases (>= 10 Items)

$196.82

$196.21
a 0% discount

$192.94
a 2% discount

$189.67
a 4% discount

N/A

$196.21

$192.94

$189.67

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping