Retailer of Tape, Glues/Adhesives & Dispensers

3M Scotch 2060

3M Scotch 2060 Rough Surface Painter's Tape

Print Page
Ask a Question
  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
  • Roll Size *
    Purchased Most Frequently: 1.88 in x 60 yds. (Green) | See Pricing Table below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Scotch® Rough Surface Painter’s Tape has a very strong adhesive designed for performance on rough, non-damageable surfaces. Use on brick, concrete, stucco, or rough wood for the protection you need to get the job done. Scotch® Rough Surface Painter’s Masking Tape is recommended for use with or on lacquer coatings. This tape holds to surfaces for up to 5 days and then removes easily without leaving any sticky residue behind.

Features & Benefits

  • Designed for use on concrete, brick, stucco, and rough wood.
  • 5-day clean removal leaves behind no damage or sticky residue.
  • Very strong adhesive.
  • Recommended for use with or on lacquer coatings.
  • Bonds aggressively, yet has a smooth unwind.
  • Made in the U.S.

    Application Instructions

    TAPE APPLICATION TIPS: For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting.
    TAPE REMOVAL TIPS: Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle.


    Technical Information

    3M Scotch 2060 Rough Surface Painter's Tape
    Note: Specifications are those given by manufacturers and are not tested for accuracy.

    Alert Roll Sizes/Widths

    Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

    2060 Standard sizes


    0.70 in. x 60 yds. bulk-packed

    Actual Size: 18mm wide


    Single Roll (1-47 Rolls)

    1 - 2 Cases (48-143 Rolls)

    3 - 4 Cases (144-239 Rolls)

    5+ Cases (>= 240 Rolls)









    0.94 in. x 60 yds. bulk-packed

    Actual Size: 24mm wide


    Single Roll (1-35 Rolls)

    1 - 2 Cases (36-107 Rolls)

    3 - 4 Cases (108-179 Rolls)

    5+ Cases (>= 180 Rolls)









    1.41 in. x 60 yds. bulk-packed

    Actual Size: 36mm wide


    Single Roll (1-23 Rolls)

    1 - 2 Cases (24-71 Rolls)

    3 - 4 Cases (72-119 Rolls)

    5+ Cases (>= 120 Rolls)









    1.88 in. x 60 yds. bulk-packed

    Actual Size: 48mm wide


    Single Roll (1-23 Rolls)

    1 - 2 Cases (24-71 Rolls)

    3 - 4 Cases (72-119 Rolls)

    5+ Cases (>= 120 Rolls)









    Nominal Tape Widths vs Actual Widths

    Nominal vs. Actual Widths Zoom In

    Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

    • 1" Nominal width = 15/16" (24mm) Actual width
    • 2" Nominal width = 1-7/8" (48mm) Actual width
    • 3" Nominal width = 2-13/16" (72mm) Actual width

    Note that tape rolls are NOT guaranteed to be splice-free.

    Question & Answers

    User Reviews

    3M Scotch 2060 Rough Surface Painter's Tape
    Made in the USA
    hot melt rubber (synthetic)
    Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
    natural rubber
    Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
    Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
    Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
    zinc oxide
    Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
    Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
    1 mil = 1/1000 of an inch
    Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
    Shopping Cart Summary

    Newsletter Signup

    Sign up today to be notified of upcoming deals and exclusive offers!

    Adhesive Tape Blog
    Video Resource Library
    How-To Resource Articles
    See also
    Electrical Tapes
    Tapes for Scrapbooking