'DAP RAPIDFUSE KIT' has been discontinued.

Product Description

DAP RAPIDFUSE Plastic Primer Adhesive Kit the latest in breakthrough technology. Easy to use - sets in 30 seconds, cures in 30 minutes. Works on all common household materials with a professional-strength bond that is 40% stronger than ordinary glues. Plus, unlike traditional super glues, the bond won't become brittle while delivering long-lasting durability. The bond is clear – no expanding foam, dripping glue, or mess. Clean up with soap and water. Indoor and outdoor use.

Features & Benefits

  • Fast Setting - xets in 30 seconds
  • Bonds All Plastics
  • 40%; stronger than polyurethane glues
  • 2X more durable than super glues
  • Bonds all plastics
  • Interior/Exterior
Country of Origin: United States.

Application Instructions

  1. Surface must be clean, dry, and free of all foreign materials.
  2. Wear gloves to avoid skin contact.
  3. For plastics apply primer over two adjoining surfaces and wait for 60 seconds for the primer to completely dry; Other types of substrates do not need primer.
  4. Apply adhesive over one surface; Optimal performance requires adequate coverage.
  5. Join the two surfaces and use typical pressure (enough to tightly bring the surfaces together); A large amount of squeeze-out is not necessary, and a thin layer is formed.
  6. Hold for 30 seconds to set, and 30 minutes to cure.


Technical Information

DAP RAPIDFUSE Plastic Primer Adhesive Kit
  • Shelf Life: 18 Months Minimum @ 70°F
  • Viscosity: Liquid
  • Appearance: Clear, water white liquid
  • Odor: Sharp
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Safety Data SheetDownload Technical Data Sheet

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles