NOTE: Federal regulations prohibit the shipment of restricted products (aerosol cans, flammable liquids, etc.) by air so please only choose UPS Ground or Surepost as your shipping method if including this product in your order. We can not export this product outside the continental U.S. for this reason.
DAP Weldwood Gel Formula Contact Cement
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
BACKORDER NOTE *** you can choose to be notified via text when an item is back in stockItem is expected in approximately 14 day(s)
Product Description
DAP Weldwood Original Contact Cement is a polychloroprene-based contact adhesive that forms a permanent bond on a variety of surfaces. It's an easy-to-use gel that won't drip. No mess. Ideal for vertical and overhead surfaces. Easy spread provides excellent coverage. Long assembly/open time. This professional quality adhesive offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Forms a durable, high-strength bond when parts are assembled and pressure is applied.
Features & Benefits
- Permanent bond
- Gel formula
- Water resistant
- Interior & exterior use
- Creates a strong durable bond
- High heat resistant
- Ideal for vertical applications
Country of Origin: United States.
Application Instructions
Preparation:
- Stir Contact Cement thoroughly with a standard paint paddle or stirring stick.
- Pre-fit all parts before applying Contact Cement.
- Surfaces to be bonded must be clean, dry and free of foreign materials. Roughen non-porous materials.
- The temperature of air, adhesive and surfaces should be above 65°F for a minimum of 24 hours before application and 72 hours after application.
Application:
- Apply one uniform coat of cement to each surface to be bonded with a paint brush, short nap roller, or finishing trowel.
- Let the coated surfaces dry for 15–20 minutes.
- Dry time may vary with temperature, humidity, and the thickness of the coat applied.
- Properly coated surfaces feel tacky and appear glossy when dry.
- Test for dryness by pressing kraft paper against the adhesive surface.
- Dry adhesive should adhere to kraft paper slightly, but not transfer.
- After the first coat is dry, recoat any dull spots; rough, porous, or absorbent surfaces may require two coats.
Warning: This product can expose you to chemicals including , which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
Technical Information
DAP Weldwood Gel Formula Contact Cement
- Clean Up: Water
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Weldwood Gel Formula Standard sizes
ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
32 fl. oz. | 25312
UPC = 070798253124 | 6 | Single Item (1-5 Items) 1 - 4 Cases (6-29 Items) 5 - 9 Cases (30-59 Items) 10+ Cases (>= 60 Items) | $15.84 $14.86 a 6% discount $14.61 a 8% discount $14.36 a 9% discount | |
Question & Answers
User Reviews
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).