'DAP PWRK' is out of stock and not currently available for purchase on the site.
DAP Wood Finish Repair Kit by Plastic Wood is a quick, easy way to repair minor blemishes in finished wood surfaces. It is designed for interior use only and is ideal for color-blending and the repair of scratches on woodwork, furniture, and paneling. An all in one kit that provides the necessary tools to complete the repair.
Features & Benefits
- Easily repair scratches in wood furniture, cabinets and molding
- For quick, easy repairs of scratches, small holes and other minor blemishes.
- Best used on interior surfaces
- Smooth, easy working putty
Country of Origin: United States.
- Surface should be clean and dry. Choose the BLEND STICK and Wood Stain Pen that most closely matches the surface to be repaired. Rub back and forth over imperfection until filled. Wipe surplus away with clean cloth and buff lightly. The Wood Stain Pen dries instantly and blends with most fine furniture; experiment first on a small section of wood.
- For color blending, stroke in the direction of the grain; for scratches, stroke in the direction of the scratch. Immediately wipe with a clean cloth to remove excess stain. Repeat for deeper shades.
- For deep holes and gouges, use the round end of the metal spatula to apply a Blend Stick shade. Use the straight edge to remove excess repair material. Remove any smudges by lightly buffing with a clean cloth.
- For narrow cuts and deep scratches, briskly rub Blend Stick back and forth across the damage area, until it is completely filled. Then follow metal spatula directions above.
- For burns, use the metal spatula to scrape the residue from the damaged area. Then follow directions for filling and finishing as noted above.
Warning: This product can expose you to chemicals including , which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
DAP Wood Finish Repair Kit by Plastic Wood
- Container: can
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).