'Duck Brand SFWK' is out of stock and not currently available for purchase on the site.
Duck Brand SFWK Shrink Film Window Insulation Kit
Duck® Brand Shrink Film Window Insulation Kits helps prevent drafts and heat loss to provide a drastic increase in energy efficiency. A properly sealed home can cut energy costs by hundreds of dollars a year. This simple solution is easy to install, affordable, and works warming wonders.
Features & Benefits
- Kit includes crystal clear shrink film and window kit tape
- Film needs to be cut to appropriate size to fit your windows
- Guarantees a draft-proof seal. For indoor use only. Non-splitting shrink film and tape removes clean
- Tools needed: measuring tape, scissors, hair dryer
- Removes cleanly
How to Install Duck® Brand Shrink Film Window Insulation Kits
- Apply tape around outside edge of window. Remove liner.
- Measure window. Add an extra 2 inches to dimensions. Cut film.
- Press film in place on tape at top of window, then sides and bottom.
- Shrink film with hair dryer to remove wrinkles.
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils