Excell RT-82276 Industrial Carton Sealing Tape Dispenser [Push-Flap]
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
BACKORDER NOTE *** you can choose to be notified via text when an item is back in stock
Item is expected in approximately 59 day(s)
The Excell RT-82276 Industrial Push-Flap Tape Dispenser is an all-plastic construction made for lightweight operation. This features a retractable blade that cuts the tape only when the plate is pressed against the surface. The push flap allows for a clean and easy cut. To keep the tape in ready-to-use position, it has a static cling strip that enables packing with only one hand. The dispenser has a natural rubber roller, an anti-rust blade, and a tension knob to adjust the tension of the side loader.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Excell RT-82276 Industrial Carton Sealing Tape Dispenser
- Construction: one-piece molded durable plastic
Note: Specifications are those given by manufacturers and are not tested for accuracy.
RT-82276 Standard sizes
|DISPENSER SIZE||ITEM #
||DISPENSERS PER CASE
||PRICE PER DISPENSER
||PRICE PER CASE
For tape up to 2" wide
EAN = 4710761988436
Single Dispenser (1-9 Dispensers)
1 - 4 Cases (10-49 Dispensers)
5 - 9 Cases (50-99 Dispensers)
10+ Cases (>= 100 Dispensers)
a 4% discount
a 5% discount
a 7% discount
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils