NOTE: Federal regulations prohibit the shipment of restricted products (aerosol cans, flammable liquids, etc.) by air so please only choose UPS Ground or Surepost as your shipping method if including this product in your order. We can not export this product outside the continental U.S. for this reason.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
Gorilla Spray Adhesive is a heavy-duty, multi-purpose and easy to use adhesive product. This spray adhesive forms a clear, permanent bond that is moisture resistant and can be used on projects both indoors and out. Gorilla Spray Adhesive is also safe for photographs. Its wide pad nozzle and controlled, fine mist spray provide an even application on the project you are working on.
Gorilla Spray Adhesive can be sanded and painted to match any surface and cures to a clear color. This adhesive meets VOC standards with a less than 30% VOC mist spray adhesive. Please note that Gorilla Spray Adhesive is not recommended for use on vinyl materials, automotive headliners, polypropylene, polyethylene or similar materials. Also, do not use for bonding weighted materials.
Features & Benefits
- Heavy-duty and dries permanent
- Easy-to-use and wide control spray nozzle for even application
- Repositionable until completely cured
- Clear and non-yellowing (direct UV exposure may affect color)
- Excellent for indoor and outdoor projects
- Moisture resistant
- Safe to use on photographs
All surfaces should be clean and free of dirt, grease, and oil. Protect surrounding areas from overspray to avoid residual adhesive.
- Shake can well before using.
- Hold the can 6 to 8 inches from surfaces to be bonded and spray an even coat of adhesive.
- For Maximum Bond Strength: Spray both surfaces to be joined. Allow to dry to tack (approximately 1 minute) and press surfaces firmly together. For Repositionable Bonds: Spray a light even coat on one surface. Allow to dry 1-3 minutes before joining. Repositionable up to 10 minutes depending on the surface type, then bond becomes permanent. To remove, gently peel from the corner. Tip: To avoid possible clogging, turn can away from body, turn upside down and spray a short jet of clear gas after completing the job.
NOTE: Not recommended for use on vinyl materials, automotive headliners, polypropylene, polyethylene or similar materials. Do not use for bonding weighted materials. Country of Origin: United States.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Gorilla Spray Adhesive
- Standards Met: VOC standard: <30% VOC mist spray adhesive
- Application Temperature: -50°F to 90°F
- Cured Color: Clear
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
SA Standard sizes
|ITEM SIZE||ITEM #
||ITEMS PER CASE
||PRICE PER ITEM
||PRICE PER CASE
UPC = 052427005618
Single Item (1-3 Items)
1 - 4 Cases (4-19 Items)
5 - 9 Cases (20-39 Items)
10+ Cases (>= 40 Items)
a 11% discount
a 12% discount
a 14% discount
UPC = 052427630155
Single Item (1-5 Items)
1 - 4 Cases (6-29 Items)
5 - 9 Cases (30-59 Items)
10+ Cases (>= 60 Items)
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils