Office, Shipping, DIY/Home, Crafting, Health, Sports & More
Order online or call us to place an order.  +1 (908) 248-0427

JVCC Aluminum Foil Tape [2 mil Linerless] (AF20-SW)

Print Page
Ask a Question
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    Purchased Most Frequently: 2 in. x 60 yds. (Silver)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

The beauty of JVCC AF20-SW Aluminum Foil Tape is that the malleable foil conforms to curved and irregular surfaces, making this acrylic adhesive tape suitable for many uses. JVCC AF20-SW is a 2-mil self-wound dead soft tape that can be used to seal out moisture and dust. It can also be used for duct sealing and masking, non-critical applications and in the appliance industry for heat reflection. This tape can be applied effectively at low temperatures and performs well at both low and high temperatures. Since it does not have a liner that must be removed during application, it produces less waste and saves time and labor.

Product Applications

  • Harness wrap
  • Seal out dust and moisture
  • Masking for paint stripping and electroplating
  • Duct sealing (AC systems, water heater vent ducts, furnace flue stacks, etc.)
  • Vapor barrier protection
  • Sealing plastic automation plateware for use in biotechnology research
  • Heat reflection and dissipation
  • Waterproof sealing
  • VBS crafts
  • Faraday cage
Country of Origin: United States.


Technical Information

JVCC Aluminum Foil Tape (AF20-SW)
  • Carrier/Backing: aluminum foil
  • Adhesive: acrylic   How are adhesives different?
  • Thickness: 3.6 mils (carrier, adhesive) 2 mils (carrier)   What is mil thickness?
  • Adhesion: 40 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 26 pounds per inch (longitudinal)
  • Service/Operating Temperature: -40°F to 302°F
  • Elongation: 4%
  • Core: 3" diameter neutral
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • 3M #4380
  • Lamart #215
  • Venture #807-2 and #2520CW
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

AF20-SW Special Order Sizes


1/2 in. x 60 yds.

Actual Size: 12.7mm wide

Approximately 3 extra business days to ship
AF20-SW/ 056072

Single Item (1-71 Items)

1 - 2 Cases (72, 144 Items)

3 - 5 Cases (216, 288, 360 Items)

6+ Cases (432, 504, 576, ... Items)

1 case minimum

a 15% discount

a 17% discount

a 22% discount





3/4 in. x 60 yds.

Actual Size: 19mm wide

Approximately 3 extra business days to ship
AF20-SW/ 0756048

Single Item (1-47 Items)

1 - 2 Cases (48, 96 Items)

3 - 5 Cases (144, 192, 240 Items)

6+ Cases (288, 336, 384, ... Items)

1 case minimum

a 13% discount

a 14% discount

a 20% discount





1 in. x 60 yds.

Actual Size: 25.4mm wide

Approximately 3 extra business days to ship
AF20-SW/ 16036

Single Item (1-35 Items)

1 - 2 Cases (36, 72 Items)

3 - 5 Cases (108, 144, 180 Items)

6+ Cases (216, 252, 288, ... Items)

1 case minimum

a 12% discount

a 13% discount

a 19% discount





1-1/2 in. x 60 yds.

Actual Size: 38.1mm wide

Approximately 3 extra business days to ship
AF20-SW/ 156024

Single Item (1-23 Items)

1 - 2 Cases (24, 48 Items)

3 - 5 Cases (72, 96, 120 Items)

6+ Cases (144, 168, 192, ... Items)

1 case minimum

a 11% discount

a 12% discount

a 18% discount





2 in. x 60 yds.

Actual Size: 50.8mm wide

Approximately 3 extra business days to ship
AF20-SW/ 26024

Single Item (1-23 Items)

1 - 2 Cases (24, 48 Items)

3 - 5 Cases (72, 96, 120 Items)

6+ Cases (144, 168, 192, ... Items)

1 case minimum

a 10% discount

a 11% discount

a 17% discount





   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles