JVCC Contractor Grade Duct Tape (DT-CG)

Print Page
2 Reviews
Ask a Question
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Black-
    White-
  • Size
    Purchased Most Frequently: 12 in. x 60 yds. (White)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC DT-CG Contractor Grade Duct Tape is a high tensile polyethylene-coated cloth duct tape with a natural rubber resin adhesive. It is a superior performance duct tape specifically designed for the high demand for contractor applications. JVCC DT-CG has excellent shear values to surface and backing. It has good conformability and excellent resistance to tear. Used in the HVAC industry to provide an excellent seal for thermal insulation and air conditioning ducts; used as a moisture barrier for both indoor and outdoor applications. Also used in asbestos abatement applications; as a quality waterproof packaging tape for export shipments; for splicing, vinyl repair, protecting and bundling.

Warning: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.

 

Technical Information

JVCC Contractor Grade Duct Tape (DT-CG)
  • Carrier/Backing: polyethylene coated cloth
  • Adhesive: natural rubber with synthetic resin   How are adhesives different?
  • Thickness: 11.8 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 36 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 30 pounds per inch (longitudinal)
  • Service/Operating Temperature: -31°F to 176°F
  • Core: 3" diameter
  • Shelf Life: 12 months
  • Country of Origin: South Korea
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • Berry Plastics #227
  • IPG #AC43
  • Shurtape #PC621 & #PC-721
  • Ideal #469
  • Scapa #146
  • Tesa #64663
  • Achem #DT39
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

DT-CG Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1 in. x 60 yds.

Actual Size: 24mm x 55m

DT-CG/ 16048

Single Item (1-47 Items)

1 - 5 Cases (48-287 Items)

6 - 11 Cases (288-575 Items)

12+ Cases (>= 576 Items)

$7.31

$5.69
a 22% discount

$5.57
a 24% discount

$5.47
a 25% discount

N/A

$273.12

$267.36

$262.56

1-1/2 in. x 60 yds.

Actual Size: 36mm x 55m

DT-CG/ 156032

Single Item (1-31 Items)

1 - 5 Cases (32-191 Items)

6 - 11 Cases (192-383 Items)

12+ Cases (>= 384 Items)

$10.21

$8.30
a 19% discount

$8.10
a 21% discount

$7.98
a 22% discount

N/A

$265.60

$259.20

$255.36

2 in. x 60 yds.

Actual Size: 48mm x 55m

DT-CG/ 26024

Single Item (1-23 Items)

1 - 5 Cases (24-143 Items)

6 - 11 Cases (144-287 Items)

12+ Cases (>= 288 Items)

$13.52

$11.27
a 17% discount

$10.98
a 19% discount

$10.79
a 20% discount

N/A

$270.48

$263.52

$258.96

2-1/2 in. x 60 yds.

Actual Size: 60mm x 55m

DT-CG/ 256020

Single Item (1-19 Items)

1 - 5 Cases (20-119 Items)

6 - 11 Cases (120-239 Items)

12+ Cases (>= 240 Items)

$15.97

$13.50
a 16% discount

$13.18
a 18% discount

$12.95
a 19% discount

N/A

$270.00

$263.60

$259.00

3 in. x 60 yds.

Actual Size: 72mm x 55m

DT-CG/ 36016

Single Item (1-15 Items)

1 - 5 Cases (16-95 Items)

6 - 11 Cases (96-191 Items)

12+ Cases (>= 192 Items)

$18.90

$16.13
a 15% discount

$15.73
a 17% discount

$15.47
a 18% discount

N/A

$258.08

$251.68

$247.52

4 in. x 60 yds.

Actual Size: 96mm x 55m

DT-CG/ 46012

Single Item (1-11 Items)

1 - 5 Cases (12-71 Items)

6 - 11 Cases (72-143 Items)

12+ Cases (>= 144 Items)

$24.73

$21.35
a 14% discount

$20.82
a 16% discount

$20.47
a 17% discount

N/A

$256.20

$249.84

$245.64

6 in. x 60 yds.

Actual Size: 144mm x 55m

DT-CG/ 6608

Single Item (1-7 Items)

1 - 5 Cases (8-47 Items)

6 - 11 Cases (48-95 Items)

12+ Cases (>= 96 Items)

$36.42

$31.85
a 13% discount

$31.05
a 15% discount

$30.53
a 16% discount

N/A

$254.80

$248.40

$244.24

12 in. x 60 yds.

Actual Size: 288mm x 55m

DT-CG/ 12604

Single Item (1-3 Items)

1 - 5 Cases (4-23 Items)

6 - 11 Cases (24-47 Items)

12+ Cases (>= 48 Items)

$71.53

$63.31
a 11% discount

$61.74
a 14% discount

$60.70
a 15% discount

N/A

$253.24

$246.96

$242.80

DT-CG Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. x 60 yds.

Actual Size: 12mm x 55m

DT-CG/ 056096

Single Item (1-95 Items)

1 - 5 Cases (96-575 Items)

6 - 11 Cases (576-1,151 Items)

12+ Cases (>= 1,152 Items)

$4.45 ½ case minimum

$3.15
a 30% discount

$3.07
a 31% discount

$3.01
a 33% discount

N/A

$302.40

$294.72

$288.96

3/4 in. x 60 yds.

Actual Size: 18mm x 55m

DT-CG/ 0756064

Single Item (1-63 Items)

1 - 5 Cases (64-383 Items)

6 - 11 Cases (384-767 Items)

12+ Cases (>= 768 Items)

$5.91 ½ case minimum

$4.43
a 25% discount

$4.33
a 27% discount

$4.27
a 28% discount

N/A

$283.52

$277.12

$273.28

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

[ viewing reviews 1 through 2 of 2 total ]
RB
Robert B. Verified Buyer Jun 12, 2018
Arrived as Promised, Just As Described
JVCC DT-CG Contractor Grade Duct Tape
We were trying to find a tape to use to cover the dry wall joints in the ceiling of our garage. The plaster has been dropping down and, rather than going to the bother of redoing the joints, we thought we'd try this. We live in PA where there is a wide range of temperatures and this tape fit the bill perfectly. White and three inches wide was just the right size for us and it went on very easily. We'll see how it holds up in this summers heat and humidity and then next winters freezing weather.
AD
Attn: D. Verified Buyer May 03, 2018
Perfect for the job!
JVCC DT-CG Contractor Grade Duct Tape
Perfect for the job!
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
EMAIL/SMS SIGN-UP
+1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles