JVCC Friction Tape (FR-1)

Print Page
Ask a Question
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    Purchased Most Frequently: 1-1/2 in. x 60 ft. (Black)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC FR-1 Friction Tape is a black cotton cloth with a non-corrosive rubber resin adhesive. Its cloth backing makes this tape easily hand tearable an extremely conformable. Highly resistant to humidity and galvanic corrosion. Holds tightly on rough and irregular surfaces, its adhesive system will not dry out. JVCC FR-1 Friction Tape is used for insulation and to protect industrial harnesses and electrical wires from physical damage caused by friction, or overwrapping low voltage splices and general electrical maintenance jobs. Country of Origin: United States.

Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.


Technical Information

JVCC Friction Tape (FR-1)
  • Standards Met: ASTM D4514-85
  • Carrier/Backing: cotton cloth
  • Adhesive: non-corrosive rubber resin   How are adhesives different?
  • Thickness: 13.3 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 20 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 46 pounds per inch (longitudinal)
  • Dielectric Breakdown: 1000 volts
  • Service/Operating Temperature: up to 176°F
  • Elongation: 4%
  • Core: 1-1/2" diameter
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

FR-1 Standard sizes


1-1/2 in. x 60 ft.

Actual Size: 36mm x 60 ft.

FR-1/ 1560

UPC = 686162769513

Single Item (1-49 Items)

1 - 2 Cases (50-149 Items)

3 - 4 Cases (150-249 Items)

5+ Cases (>= 250 Items)


a 22% discount

a 23% discount

a 25% discount





FR-1 Special Order Sizes


3/4 in. x 60 ft.

Actual Size: 18mm x 60 ft.

Approximately 3 extra business days to ship
FR-1/ 07560

UPC = 682821230080

Single Item (1-99 Items)

1 - 2 Cases (100, 200 Items)

3 - 4 Cases (300, 400 Items)

5+ Cases (500, 600, 700, ... Items)

1 case minimum

a 30% discount

a 31% discount

a 32% discount





2 in. x 60 ft.

Actual Size: 48mm x 60 ft.

Approximately 3 extra business days to ship
FR-1/ 26040

Single Item (1-39 Items)

1 - 2 Cases (40, 80 Items)

3 - 4 Cases (120, 160 Items)

5+ Cases (200, 240, 280, ... Items)

1 case minimum

a 19% discount

a 21% discount

a 22% discount





Special Order Policies & Footnotes:

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Recently Viewed Products
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
ga('set', 'dimension10', '2');