'JVCC GAFF-OD' is not currently available for purchase on the site.
This product was an overstock of olive drab and no inventory now remains. Please see Pro Tapes Pro-Gaff gaffers tape or JVCC J90 low-gloss duct tape for an alternative in olive drab.
JVCC GAFF-OD Olive Drab Gaffers Tape [Discontinued]
Your next theater production or photo shoot will be anything but drab when you order overstock olive gaffers tape. JVCC GAFF-OD Gaffers Tape is a medium grade, vinyl coated tape that uses a rubber adhesive coating and has good transfer resistance. This pressure-sensitive adhesive cloth tape can be torn and applied by hand, and comes off clean with no residue or paint removal.
Gaffers tape is a must in the A/V, television, theater and film industries, where it's used to hold wires and light, mark prop and furniture locations, and secure carpets. Warehouses also use gaff tape to bind wires and metals, color-code areas and create heavy-duty waterproof packaging. Olive drab tape is ideal for patching bus seats or creating camouflage coloring. With our overstock supplies, you'll save even more when you stock up on gaffers tape. Made in the U.S.
JVCC GAFF-OD Olive Drab Gaffers Tape
- Carrier/Backing: vinyl coated cloth
- Adhesive: rubber How are adhesives different?
- Thickness: 11 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 45 ounces per inch (to stainless steel test panel)
- Tensile Strength: 40 pounds per inch (longitudinal)
- Core: 3" diameter neutral
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils