'JVCC HTM-01' is out of stock and not currently available for purchase on the site. Please note this product has been discontinued and only limited inventory now remains.
JVCC HTM-01 High Temperature Masking Tape [Discontinued]
Product Description
JVCC HTM-01 High Temperature Masking Tape is a premium painters masking tape with a solvent-based cured natural rubber adhesive system designed to work in masking applications where elevated temperatures and solvent resistance are required. This tape can be used up to 230°F for up to one hour while maintaining integrity, holding power, and clean removal characteristics. JVCC HTM-01 conforms to a broad range of surfaces. Use of this heavy crepe paper tape provides good tensile strength and tear characteristics as well as excellent elongation for wrapping and masking around curved surfaces. JVCC HTM-01 High Temperature Masking Tape is recommended for high demand painting and masking applications, and especially automotive masking applications.
Masking tapes cut to wider widths like 4, 6 and 8 inches are harder to unwind without tearing the roll since masking tape is thinner crepe paper. To avoid possible tearing, it is best to start by unwinding the tape slowly. Once you have an entire full-width section unwound, then fold the tape over itself as we show in the photo which makes the unwind process much easier.
Technical Information
JVCC HTM-01 High Temperature Masking Tape
- Carrier/Backing: crepe paper
- Adhesive: solvent-based natural rubber How are adhesives different?
- Thickness: 6.4 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 35.3 ounces per inch (to stainless steel test panel)
- Tensile Strength: 24 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 230°F
- Elongation: 10%
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Roll Sizes/Widths
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Alternative to...
This product can be used as an alternative to the following products(s):
- Hystik #832
- 3M #213
- Tesa #4318 PV2
- Nashua #108N
- Alpha Beta #816
- Cantech #110-00
- Nitto #P-703
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils